How to distribute the Internet from the phone Xiaomi Redmi 10

Modern smartphones have long ceased to be just devices for calls, becoming full-fledged mobile offices. Xiaomi’s Redmi 10 model is equipped with reliable communication modules that allow you to quickly organize the distribution of Wi-Fi for other gadgets, this feature becomes critical when you urgently need to connect a laptop to the network in a cafe, train or in the country where there is no fixed router.

The process of activating modem modem in the shell MIUI or HyperOS differs from standard Android by the presence of additional security settings and traffic management. Xiaomi owners have expanded the ability to limit connections and select frequency range. Proper configuration of these parameters will help not only to ensure stable speed, but also protect personal data from unauthorized access.

In this guide, we will take a look at the details of how to set up an access point, how to change the network name, set a complex password, and choose the optimal frequency range for maximum compatibility or speed, and focus on energy consumption and possible customer connection issues.

Basic setting of the Wi-Fi access point

To get started, you need to go to the appropriate system settings menu. The easiest way to do this is through the notification curtain, but for the initial configuration, you better use the full settings interface. Go to Settings → Wi-Fi Access Point. This shows the current distribution status and basic network settings.

Click on Setting up the Wi-Fi hotspot. In the window that opens, you will see the network name (SSID) that contains your device's default model, and it's recommended that you change that name to more recognizable so you don't get confused in the list of available networks in public, and that's also a password that should be complicated enough.

⚠️ Note: Do not use simple combinations like "12345678" and the password must contain letters of different register and numbers to protect against brute force selection.

Once you have entered all the data, click the tick in the top right corner to save. You can now activate the slider in the top partition menu. The device will broadcast the signal, and other gadgets will be able to detect your network, the process usually takes no more than 10-15 seconds after turning on.

Choice of frequency range: 2.4 GHz or 5 GHz

One of the key features of the Redmi 10 setup is the ability to select the frequency range. In the access point menu, find the access point frequency range. There are two options here: 2.4 GHz and 5 GHz. The choice depends on which devices will connect to your smartphone and where you are.

The 2.4 GHz band is more versatile. It's supported by all devices, including old laptops, tablets and budget smartphones. The signal on this frequency penetrates walls better, which is useful if the phone is in one room and you work in another. However, the data speed here is lower, and the air is often clogged with neighboring routers.

The 5GHz band provides significantly higher speeds and connectivity stability, which is critical for watching 4K video or online gaming. However, the signal range is smaller and it travels worse through obstacles. Also, older devices may simply not see the network if you choose this mode.

If you are not sure about the characteristics of the connected devices, it is better to leave the standard value or choose 2.4 GHz. For modern gadgets located in the vicinity of the phone, prefer 5 GHz. Experiment with settings if you notice a low page load speed on client devices.

Connected Device Management and Security

The control over who is connected to your network is done in the Connected Devices section, which shows you a list of all the gadgets that are using your traffic at the moment, MAC-address and volume of data transmitted, which allows you to quickly identify "uninvited guests".

Every connected client has a lock function, you can click on a device and you can block them from accessing the network, and the hotspot settings often have a whitelist option, and if you activate this mode, only those devices whose devices are able to connect can. MAC-Addresses you have previously entered in the list of permitted.

• 🔒 Device Maximum: By default, the system limits the number of connections (usually up to 10), which protects the phone's processor from overload.
• 👁️ Hiding SSID: in the settings you can enable the option "Hide the device", then the network will not appear in the general list, and you will need to manually enter the name to connect.
• ⏱️ Disconnect timer: a useful charge saving feature that allows you to turn off the access point if no one connects to it within 5 or 10 minutes.

⚠️ Attention: When turning on concealment SSID (Invisibility of the network) some operating systems, such as Windows or iOS, may incorrectly reconnect or require manually entering the network name each time.

Regularly checking the list of connected devices is a good habit. If you see a stranger, immediately change the password in the access point settings. This will break the connection for everyone and require re-authorization with a new key.

Distribution of Internet via USB and Bluetooth

In addition to the wireless method, Xiaomi Redmi 10 supports wired Internet distribution, which is often ignored, but it has several advantages, such as no delay (ping) and simultaneous charging of the smartphone. → Connection and sharing → USB-modem.

The computer will automatically detect the new network connection. Drivers are usually installed automatically by the system, because the protocol is used. RNDIS or ECM It's built into modern OSes. If the Internet didn't come, try changing it. USB-cable to better, support data transfer, not just charging.

Bluetooth modeming is the third, least popular option, and it provides very low data rates, but it consumes minimal power, and you can activate it in the same settings menu, and it's only suitable for text or email in emergency situations where other methods are not available.

Traffic problems and operator restrictions

Many users experience a situation where the access point is turned on, but the Internet on connected devices does not work, often because of mobile carrier tariffs, and some providers block or limit the speed of Internet distribution if they see that traffic is not from a smartphone, but from a computer or tablet.

Operators determine the output by the value of TTL (Time To Live). On smartphones it is usually 64, and on computers it is 128 or 255. When a data packet passes through the phone, the value decreases by 1 and the operator sees a discrepancy. To circumvent this restriction on some Xiaomi models, you need to change system parameters, but this may require root rights or complex manipulation of ADB.

If the operator uses rigid locks, the only legal solution is to purchase the tariff with unlimited distribution or use special options. Attempts to bypass the locks may violate the terms of the contract with the operator. Always check the current terms of your tariff plan in the operator's application.

💡

If the internet on a connected laptop is slow, try the hotspot settings on your phone to force the WPA2 PSK security type, as older devices may not work properly with WPA3.

Energy consumption and heating of the device

The access point mode puts a high load on the radio module and the Redmi 10 processor. This inevitably leads to increased battery consumption and heating of the case. When actively distributed via Wi-Fi 5 GHz, the phone can heat up appreciably, especially if you are simultaneously downloading files or updating applications.

To minimize the risks of overheating, it is recommended to remove the protective case if it is dense and does not remove heat; also, do not leave the phone in the sun or on soft surfaces (sofa, pillow) while operating in modem mode.

If you plan a long session of distribution of the Internet, it is better to connect the smartphone to the charger. However, watch the temperature: charging + active data transfer + heating from the sun can lead to critical overheating and emergency shutdown of the device by the protection system.

💡

For long-term operation in modem modem, use the original charger and remove the thick case for better heat sink.