How to give away the Internet from the phone Xiaomi Redmi: all ways + error solving

Modern Xiaomi Redmi smartphones can turn into full-fledged routers, distributing mobile Internet to other devices, this feature will come in handy when traveling, in the country, or when the main Wi-Fi suddenly turned off, but not everyone knows how to properly configure the access point on the Redmi Note 12, Redmi 10 or other models — especially if there are errors like “failed to turn on the access point” or devices do not connect.

In this guide, we will explore all the ways you can share your Internet with Xiaomi Redmi (including hidden MIUI features), explain why problems can occur, and provide specific solutions for typical errors, and learn how to save traffic when you distribute and why some carriers block this feature.

1. Preparation of the telephone before distribution of the Internet

Before you turn on the access point, check out a few key points – this will save you 90% of connection problems:

• 📶 Mobile network: Make sure there is a stable signal on the phone 4G/LTE or 5G (on supported models) if the indicator shows H+ or 3G, speed is extremely low.
• 🔋 Battery charge: Internet distribution is actively consuming energy. If the charge is below 20%, connect the phone to charge - some Redmi models automatically turn off the access point when the battery level is low.
• 📱 Updates MIUI: Older versions of firmware may have Internet distribution bugs. Check the relevance of the software in Settings → The phone. → Updating the system.
• 💳 Operator's fare: Some mobile operators (e.g. Tele2 or Iota) block the distribution of Internet at cheap rates.

Pay special attention to the APN settings, if they get lost, the Internet will work on the phone, but it will not be distributed, to check:

1. Go to Settings. → SIM-maps and mobile networks → [Yours. SIM] → Access points (APN).
2. Make sure that your operator profile is selected (for example, internet.beeline.com for Beeline).
3. If there are several profiles, try each one in turn - sometimes operators change the settings.

⚠️ Note: Some Redmi models (e.g. Redmi) 9A) After resetting the profile disappears APN. In this case, you need to create it manually - the parameters can be found on the website of your operator.

2. Method 1: Distributing Wi-Fi through an access point (most popular)

This is a standard method that works on all Xiaomi Redmi models – from Redmi 4X to Redmi Note 13 Pro+. Internet is distributed wirelessly, which can connect up to 10 devices at a time (depending on the model).

Step instructions:

1. Open Settings and go to Network & Internet → Access Point and Modem (on older versions of MIUI, the path may differ: Additional → Modem).
2. Slip on the Wi-Fi Access Point (or Portable Access Point on English firmware).
3. Turn on the Wi-Fi Access Point slider.
4. Click Access Point Settings to ask:

Save the settings and turn on the access point.

Now other devices (laptop, tablet, second phone) can connect to your network. MIUI 14+ In the top notification panel will appear icon 📶 number of connected devices.

On Redmi models with Snapdragon 8xx chipset (for example, Redmi K60), the access point supports the Wi-Fi 6 standard, which allows you to distribute Internet at speeds up to 1 Gbps when connecting to 5G. On budget smartphones (for example, Redmi A2), the maximum speed is limited to 150 Mbps.

Method 3: Distributing the Internet via Bluetooth (savings charge)

If you only need to connect one device (like a laptop or tablet) and save battery power, use a Bluetooth modem. This method uses less power than Wi-Fi, but the speed will be lower (up to 30 Mbps).

How to set up:

1. Turn on Bluetooth on both devices.
2. On Redmi, go to Settings → Network and Internet → Access Point and modem.
3. Activate the Bluetooth modem option.
4. On a second device (like a laptop) in the Bluetooth list, find your Redmi and connect to it as a network.

⚠️ Note: On some Windows laptops 10/11 You may not have Bluetooth Internet connection, in which case update your adapter drivers or use Wi-Fi.

Method 3: Distribution via USB (maximum stability)

If you want to distribute the Internet to a PC or laptop at high speed and without loss, use a USB modem. This method is suitable for Redmi models with support for USB-ethernet (virtually all modern smartphones, except the most budget).

Step-by-step:

1. Connect your phone to your computer through the original USB-cable (preferably from the set).
2. On Redmi, select the Data Transfer Connection Mode (or MTP if the first option doesn’t work).
3. Go to Settings → Network and Internet → Access Point and modem.
4. Turn on the option. USB-modem.
5. A new device will appear on the computer in the network connection list (e.g., Remote NDIS).

USB-A modem is the best choice for online gaming or video conferencing, where minimal latency is important. However, keep in mind that with this connection, the phone will be slower to charge (or even discharge if the cable is poor).

💡

If the computer doesn't recognize USB-Modem, try connecting your phone to another port USB (preferably USB 3.0) or install Mi drivers PC Suite from the official Xiaomi website.

5. Typical errors and their solutions

Even after you set it up properly, the access point on Xiaomi Redmi may not work. Let's look at the most common problems and how to fix them.

Error 1: "I failed to turn on the access point"

Causes and solutions:

• 📵 No mobile internet: Check if the internet is working on the phone itself. If not, restart the device or reinstall it. SIM-map.
• 🔄 Conflict with VPN: Turn it off. VPN-applications (e.g. 1.1.1.1 or NordVPN) and try again.
• 🔧 Failure MIUI: Reset network settings: Settings → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.

Mistake 2: Devices are connected, but the internet is not working

Possible causes:

• 🌐 Operator lock: Some rates (e.g., "For Yourself" from MegaFon) do not support Internet distribution.
• 🔒 Wrong. APN: Delete your current profile APN Create a new one manually (options can be found on the operator’s website).
• 📱 Traffic savings: Redmi settings can enable data saving mode. Turn it off in Settings → Network and Internet → Transfer of data → Saving traffic.

Error 3: The access point itself is turned off

This is a typical problem for Redmi with MIUI 12 and newer.

• ⚡ Low charge: Connect your phone to charge - on some models, the access point turns off when charged below 15%.
• ⏱️ Time Out: In the Access Point Settings (Settings) → Time out, set the value of Never.
• 🔄 Overheating: If the phone gets too hot, the modem will shut down for cooling.Close the background apps and lower the screen brightness.

6. How to save traffic when giving out the Internet

Mobile Internet can quickly run out of rates, especially if you have multiple devices connected to your point.

• 📊 Speed Limit: In the Access Point settings (Settings) → Speed limit) set a limit, for example, 5 Mbps. This is enough for instant messengers and mail, but not for video in the video. 4K.
• ⏳ Automatic Shutdown Timer: Set up Disconnect the Access Point via 30-60 minutes of inactivity (Setting up) → Time out).
• 🔍 Background Blocking: On connected devices, turn off automatic app updates and syncs (e.g. Google Photos or OneDrive).
• 📵 Disabling Ads: Use a browser with an ad blocker (such as Brave) – this will reduce traffic consumption on your website 20-30%.

Redmi with MIUI 13+ has a hidden access point traffic monitoring feature to enable:

1. Go to Settings → Network and Internet → Access Point and modem.
2. Slip on the three dots in the top right corner and select Traffic Statistics.
3. Here you will see how much data each connected device spent.

⚠️ Note: If you distribute the Internet at an unlimited rate, the operator may limit the speed after exceeding the "fair limit" (usually the service provider will be able to use the service). 10-30 GB per month. Check the terms with your provider.

7. Hidden Access Point Features on Xiaomi Redmi

MIUI hides some useful options that can improve the operation of the access point.

• 🔄 Automatic Enablement When Connecting Device: Activate Developer Settings (Tap 7 times on Version) MIUI In the section About the phone, go back to the → For developers and enable Always enable the access point when connecting USB.
• 📶 Change in Wi-Fi range: On models with Wi-Fi 6 support (e.g. Redmi) K50) You can select the 5 GHz band for less interference. To do this, select Range in the access point settings. → 5 GHz.
• 🔑 Hidden Network: If you don’t want your access point to be visible to everyone, turn on Hide SSID You have to manually connect to this network.