How to give Wi-Fi from the phone Xiaomi Redmi 7: all ways + fixing

Xiaomi Redmi 7, released in 2019, is still a popular budget smartphone due to reliable hardware and support for current versions. MIUI. One of the most popular features of the device is the ability to distribute mobile Internet to other gadgets, but many users face difficulties: the access point is not turned on, connected devices do not access the network, the operator blocks the function. In this article, we’ll break down all the ways to distribute the Internet with Redmi 7, including hidden settings, circumvention of restrictions and speed optimization.

It is important to understand that the setup process depends on three factors: the firmware version (MIUI 10–14), mobile operator (some block the feature or charge extra) and technical features of the connected devices. V12.5.3.0 and V14.0.2.0, And on Android 9-11 devices under the hood, if your phone is running on an older version, update the software before you start setting up.

At the end of the article you will find FAQ For typical errors (e.g., "why does the distribution go off in 5 minutes" or "how to change the password of the access point"), as well as a compatibility table with different operators.

1. Standard method: access point in MIUI settings

This is a basic method that works on all Xiaomi smartphones, including the Redmi 7. The main advantage is the simplicity and no need to install third-party applications. However, there are limitations to the method: the operator can block the function or limit the speed.

To turn on the Internet distribution:

1. Open the Settings app** (the gear icon on the home screen).
2. Go to the section Network and Internet → Access Point and modem.
3. Select the Wi-Fi Access Point.
4. Activate the Wi-Fi Access Point slider (it will turn blue).
5. Click on Access Point Settings to set the network name (SSID), Password and frequency range (2.4 GHz or 5 GHz).

By default, Redmi. 7 Creates a network with a name Xiaomi_XXXX (where XXXX — last-minute IMEI) and password 8 We recommend changing these parameters to more memorable ones, but don't use simple combinations like this. 12345678 — This will make your network vulnerable to hacking.

Mobile Internet on the phone is stable (check the speed in Speedtest)

There is enough traffic on the tariff counter (some operators block the distribution at zero balance)

In the settings of the access point, the 2.4 GHz range is selected (better passes through walls than 5 GHz).

The connected device is not further than 5-7 meters from the phone (radius limited)

-->

An important nuance: if after activation of the access point, the Internet on connected devices does not work, but the Wi-Fi indicator is burning - the problem may be in the settings APN. We will talk about this in the section on error solving.

2. Alternative ways of distributing the Internet

If the standard method didn't work (e.g., the operator blocked the function), you can use workarounds. We tested three working variants for Redmi 7:

• 🔌 USB-Modem: Connecting your phone to your PC or laptop via cable, more reliable than Wi-Fi, because it is not affected by interference, but requires Mi drivers. PC Suite (you can download it on the official website of Xiaomi).
• 📶 Bluetooth modem: suitable for tablets or laptops without a Wi-Fi adapter, speeds are lower than Wi-Fi, but battery consumption is minimal.
• 🛠️ Third-party applications (e.g. PdaNet)+ They bypass carrier lockdowns, but may require root rights or paid subscriptions.

Let’s look at each method in more detail.

2.1. Distribution through USB (PC- and laptop-based)

This is ideal if you want to connect a desktop computer or a laptop to the Internet without a Wi-Fi module.

• ⚡ Stable speed (up to 80% of the maximum speed of mobile Internet).
• 🔋 Minimum battery consumption of the phone (power comes from the USB).
• 🛡️ Fewer vulnerabilities to hacker attacks than Wi-Fi.

Instructions:

1. Connect Redmi 7 to your computer via the original USB-cable (better to use port) USB 3.0 on PC).
2. On the phone in the Settings section → Network and Internet → Access point and modem turn on USB-modem.
3. On PC, wait for the driver installation (if they are not installed automatically, download Mi). PC Suite).
4. Windows Network Connections Will Have a New Remote Connection NDIS — That's your phone.

⚠️ Warning: If Windows does not recognize the device, try changing the mode USB To do this, when you connect the cable, pull the notification curtain down and select File Transfer (MTP), And then turn it on again. USB-modem.

Distribution via Bluetooth (for tablets and old laptops)

This method is inferior to Wi-Fi in speed (maximum 3-5 Mbit / s), but it helps when:

• 📱 You need to connect a device without Wi-Fi (for example, an iPad with a broken module).
• 🔋 It is important to save battery life (Bluetooth consumes 2-3 times less power than Wi-Fi).
• 🚫 Operator blocks distribution over Wi-Fi, but not Bluetooth.

How to set up:

1. Turn on Bluetooth on both devices.
2. On Redmi 7, go to Settings → Devices → Bluetooth and find the target device in the list.
3. Confirm the pairing (some devices will need to enter) PIN-code, usually 0000 or 1234).
4. Back to Settings → Network and Internet → Access Point and modem and turn on Bluetooth modem.

On the connected device, select Redmi 7 in Bluetooth settings and activate the Use option to access the Internet (the name may vary depending on the OS).

3. set up the access point for maximum speed

By default, Redmi 7 distributes Internet at speeds limited by settings MIUI But there are a few ways to increase the capacity of the operator:

• 📶 Change Wi-Fi range: In the access point settings, select 5 GHz instead of 2.4 GHz (if the connected device supports this standard), which will reduce the range, but increase the speed to 2-3 times.
• 🔧 Turn off traffic savings: in Settings → SIM-maps and mobile networks → Transfer of data → Save traffic deactivate the option for the current SIM-map.
• 📊 Use it. APN with maximum speed: some operators (for example, MTS or Beeline) offer special services. APN For more information, see the error section.

A critical feature of Redmi 7: when you distribute the Internet through Wi-Fi, the phone automatically limits the speed to 10-15 Mbps, even if your tariff supports 50 Mbps+ Mbps. This is done to save battery power. To remove the restriction, you need to turn off the Smart Traffic Management function in the settings. SIM-map.

Also pay attention to Wi-Fi. By default, Redmi 7 selects the channel automatically, but in urban environments this can lead to interference. We recommend manually setting the channel in the range of 1-6 (2.4 GHz) or 36-48 (5 GHz).

4. Solving Typical Errors in Internet Distribution

Even after you set it up properly, Redmi 7 users often run into problems, and we've collected some of the most common bugs and ways to fix them.

4.1 Access point is turned on, but the Internet is not working

Causes and solutions:

• 📵 No mobile internet on your phone: check your balance and settings APN. To do this, go to the Settings. → SIM-maps and mobile networks → Access points (APN) Compare the parameters with your operator’s standards.
• 🔒 Operator blocks distribution: some tariffs (for example, "For laptop" from Tele2) allow distribution only through the Internet. USB. Check the terms of your tariff on the operator's website.
• 🔄 Conflict IP-Addresses: In the settings of the access point, change the Pool DHCP s 192.168.43.x on 192.168.1.x.

If the problem persists, try resetting your network settings: Settings → System system → Resetting settings → Resetting Wi-Fi, Mobile Internet and Bluetooth settings.

4.2. Access point is disconnected after 5-10 minutes

This error is related to energy savings in MIUI. To eliminate her:

1. Go to Settings → Battery and Performance → Battery Consumption Management applications.
2. Find the Access Point (or Tethering) in the list and select Unlimited.
3. Turn off the option Adaptive battery in the Settings section → Battery.

Also check if the phone is overheating.Redmi 7 automatically turns off the distribution at a CPU temperature above 65°C.

4.3 Devices are connected, but the speed is very low

Possible causes:

• 📡 Weak Mobile Network Signal: Go to Settings → SIM-maps and mobile networks → Select the network and manually select 4G (LTE) car.
• 👥 Too many connected devices: Redmi 7 works stably with 3-5 gadgets.
• 🔋 Traffic Saving Mode is Activated: Turn It Off in Settings → SIM-maps and mobile networks → Transfer of data.

5. Operator restrictions: how to bypass the distribution block

Many Russian operators (MTS, Beeline, MegaFon, Tele2) block or restrict the distribution of Internet at tariffs without the option “Modem”.

If the operator blocks the distribution, but you do not want to pay for additional options, you can try:

• 🔄 Change. APN: Sometimes it helps to create a new profile. APN with parameters for tablets (for example, Internet.yota for Yota).
• 📱 Use crawler apps like PdaNet+ FoxFi (requires root or paid version).
• 🔌 Connect through USB: Many operators do not block this method.

⚠️ Attention: Bypassing the operator's locks may violate the user agreement. SIM-card for "misuse of traffic" We recommend that you specify the terms of the tariff before using bypass methods.

6. Saving battery power when distributing the Internet

Redmi 7 is equipped with a battery capacity of 4000 mAh, but when you actively distribute the Internet through Wi-Fi, it sits down in 3-4 hours.

• 🔋 Use charging while handing out: even if the phone shows 100%, connect it to the network – this will reduce the load on the battery.
• 🌙 Activate the dark theme: in Settings → Screen. → Dark subject. AMOLED-This saves up to 15% of the charge on screens.
• 📴 Turn off background applications: in Settings → Annexes → Auto-Run Ban Auto-Run Unnecessary Programs.
• 📶 Reduce Wi-Fi power: Select 2.4 GHz instead of 5 GHz in the access point settings – this will reduce power consumption by 20 GHz%.

You can also limit the maximum speed of the distribution.

1. Install the NetGuard app from Google Play.
2. In the application settings, find the Access Point and set a speed limit (for example, 5 Mbps).

💡

If you often give out the Internet on the road, buy a powerbank with a capacity of 10,000-20 000 mAh with support for Quick Charge 3.0. Redmi 7 is compatible with this technology and charges 2 times faster from such batteries.

7.Security: How to Protect Your Access Point

An open access point is not only a risk to your traffic, but also to data security, and a hacker can intercept the information transmitted (passwords, messages) or use your phone for illegal activities.

• 🔐 Use a complex password: minimum 12 symbols with numbers, capital letters and special signs (for example, Xiaomi7_2026!WiFi).
• 🔄 Change your password once a month to reduce the risk of connecting third-party devices.
• 👤 Limit the number of connected devices: in the settings of the access point, set a maximum of 3-4 gadgets.
• 🛡️ Turn it off. WPS: This feature makes it easier to connect, but it makes the network vulnerable. WPS Push Button.

We also recommend that you include notifications for new connections.

1. Install the Fing app from Google Play.
2. Run a network scan.
3. In the application settings, activate the Notification of New Devices option.

If you notice a suspicious device in the list of connected, immediately change the password of the access point and check the phone for viruses (for example, using Malwarebytes).

8. Frequent Questions (FAQ)

💡

If after all the manipulations, the distribution of the Internet does not work, check whether your operator blocks it. The most reliable way is to call support and check if the function is allowed on your tariff. Often the problem is solved by connecting the option Modem for a nominal fee (50-100). ₽/month).