How to give away the Internet from Huawei to Xiaomi: the complete guide

In today’s digital ecosystem, there are often situations where mobile internet is needed not only on the main device but also on other gadgets. A Huawei smartphone owner can easily turn his device into a powerful router by providing network access for a Xiaomi device. This process, known as hotspot creation or modem mode, allows you to share traffic without the use of additional wires or complex equipment.

The speed and stability of the connection are directly dependent on the quality of the 4G/LTE signal and the correct configuration of the settings. The interaction between the EMUI or HarmonyOS shells on the dispenser side and the MIUI on the receiving side usually goes smoothly, if basic technical requirements are met. It is important to understand that the distribution of the Internet consumes battery power much faster than normal use.

There are several ways to organize this connection, each with its own advantages and disadvantages, and you can choose the wireless method over Wi-Fi, which provides high speed, or the wired option through Wi-Fi. USB-Bluetooth is also available, which is suitable for transferring small amounts of data with minimal power consumption.

Preparing devices for creating an access point

Before setting up, make sure both smartphones are in good working order and have up-to-date software versions. SIM-cards with connected data rates, which support data transfer. Make sure that there are enough funds on the balance sheet or the Internet package is included, as the distribution of traffic is possible only with an active connection to the operator's network.

Xiaomi’s host device also needs to check whether the Wi-Fi module or Bluetooth adapter works depending on the connection method chosen, and it is recommended to temporarily disable energy-saving modes that may limit the background activity of network interfaces, especially for the MIUI shell, which aggressively optimizes the operation of applications and services to save charge.

Remember to prepare passwords in advance if you plan to use a secure connection. Using an open network without a password can lead to unauthorized access by unauthorized persons to your traffic. Data security in public places is a priority, so you should not ignore encryption settings.

Setting up a Wi-Fi hotspot on Huawei

The process of activating modem modem on Huawei smartphones begins with going to the main menu of system settings. You need to find the section responsible for wireless networks, which can be called differently in different versions of firmware, most often the item you want is located in the category Wireless networks or immediately visible in the list of main parameters.

After entering the menu, select Modem Modem, and then go to Wi-Fi Access Point. This is where the primary network configuration is made. This is where the network name (SSID) is set, which will appear in the list of available connections on the Xiaomi device.

Pay special attention to security settings. It is recommended to use the WPA2 PSK encryption standard, as it provides reliable protection for the data transmitted. The password should be complex enough to exclude the possibility of selection, but also convenient for quick input on the screen of the smartphone.

Some models have a list of allowed devices management feature, so you can configure the access point so that only specific gadgets whose devices can connect can. MAC-The addresses are whitelisted, and this will prevent strangers from connecting even if they know the password from your network.

Connecting Xiaomi smartphone to the network

After successfully activating the access point on Huawei, you need to go to configure the receiving device. On a Xiaomi smartphone, open the notification curtain and click on the Wi-Fi icon to go to the wireless connection management menu. Make sure that the slider is active and the device starts searching for available networks within range.

In the list of detected networks, find the name you set on the distribution device. It may be different from the factory name of the phone model. Click on the appropriate line to begin the pairing procedure. The system will request a password if you set up protection during the access point setup stage.

Once you have entered the correct password and successfully logged in, a connection icon will appear in the status bar. If the Internet is not working automatically, check if the back-end traffic limit for system services is worth it. In rare cases, manual input may be required. DNS-server.

• 📡 Make sure that Xiaomi does not have the “Airplane” mode that blocks all radio modules.
• 🔒 When entering a password, pay attention to the register of letters and the keyboard layout.
• ⚡ To speed up the connection, you can temporarily disable mobile data on Xiaomi itself.
• 🔄 If the connection is suspended, try to forget the network and connect again.

💡

For stable connection, keep the devices no more than 5-7 meters apart, avoiding thick concrete walls and sources of strong electromagnetic interference.

Alternative methods: USB and Bluetooth

When wireless connectivity is impossible or unstable, wired and near-wireless technologies come to the rescue. USB-The modem not only allows you to share the Internet, but also to charge the Huawei device at the same time, which is critical for long-term operation.

Connect your smartphones with a cable and in the modem menu on Huawei activate the switch USB-Xiaomi automatically recognizes a new network connection and suggests using it to access the Internet, which provides minimal latency (ping) and high data transfer speeds.

The Bluetooth option is suitable for situations where you need to save battery power or transfer a small amount of text information. The speed here will be much lower than Wi-Fi, but the power consumption is minimal. The process begins with pairing devices through the Bluetooth menu in the settings of both smartphones.

💡

USB-Connection is the only way to simultaneously distribute the Internet and not lose battery power on the Huawei device, as the power comes from Xiaomi.

Diagnostics and Solving Connection Problems

Despite standardizing protocols, users may find themselves seeing each other but the internet is not working. Often the problem lies in the APN settings on the carrier’s SIM card. If you’re connecting to Huawei’s Wi-Fi network, Xiaomi doesn’t load pages, check the mobile data on Huawei itself.

Another common reason is to limit the number of connected customers. Many smartphones allow up to 8 devices to connect by default, but in case of a crash, you should try to reduce this number to one.

⚠️ Note: If you use a tariff with unlimited Internet, the operator can automatically block the ability to distribute traffic (Tethering). TTL or use of special applications.

Rebooting network settings on both devices often helps to reset accumulated caching errors. On Xiaomi, this can be done via the recovery and reset menu by selecting the Wi-Fi and Bluetooth reset option. On Huawei, it is enough to turn off and turn on flight mode.

• 🛑 Check if the traffic limit on the Huawei SIM card is exhausted.
• 🔋 Make sure Huawei phone doesn’t go into deep sleep mode.
• 📶 Try changing the Wi-Fi frequency range from 5 GHz to 2.4 GHz for better compatibility.
• 🔐 Turn off the filtering. MAC-addresses, if it is enabled on the distributing device.

Optimizing traffic and battery consumption

Internet distribution is a resource-intensive process that quickly lands the battery and consumes traffic. To extend the battery life of Huawei, it is recommended to reduce the brightness of the screen or turn off the display altogether.

Traffic control avoids unexpected costs, you can set a data limit in the access point settings, after which the distribution will automatically stop, and it is a useful feature if you share the Internet with a device that can automatically download updates.

Using a dark theme on both devices also helps save energy, especially if the screens are made using AMOLED technology. Although this does not affect the speed of data transfer, the total life of the bundle of smartphones will increase.

⚠️ Note: When you actively use navigation or video streaming on Xiaomi via Huawei’s hotspot, your traffic consumption can reach the point of entry. 1-2 GB per hour. Watch the rest of the data packet.