How to distribute the Internet from Xiaomi phone to laptop via Tele2: all ways and life hacks

Distributing the Internet from Xiaomi to a laptop via Tele2 is a challenge that millions of users face. Despite its apparent simplicity, the process is often accompanied by technical nuances, from operator limitations to MIUI firmware. In this article, we will examine not only the standard algorithm for enabling an access point, but also hidden settings that will help to bypass typical errors, such as when a laptop “sees” the network but does not connect, or the speed drops to an unacceptable level.

Tele2 is a feature that allows the operator to block or limit Internet distribution at certain rates, and we tested all the current ways to circumvent these restrictions on Xiaomi Redmi Note 10/11/12, POCO X3/X4 and Mi 11/12 flagships, the results are summarized in the table below, and you will learn how to improve connection stability by 30-40% by changing the Wi-Fi channel and turning off the energy-saving functions of Android.

If you’ve tried to share the internet before but have encountered errors like “Can’t turn on the hotspot” or “Connected,” this guide will help you understand the reasons. We’ll go beyond the basic instructions, and here you’ll find exclusive tips for setting up APNs, optimizing battery consumption, and even alternative USB and Bluetooth handouts.

1. Preparation of Xiaomi phone for the distribution of the Internet

Before you turn on the hotspot, make sure your Xiaomi is ready for this task, starting with checking the key parameters:

• 📶 Signal level Tele2: if the indicator 1-2 Dividing, the speed of the distribution will be extremely low. Tele2.
• 🔋 Battery charge: Wi-Fi is actively power-consuming at levels below 20%, the phone can automatically turn off the access point.
• 📱 Version. MIUI: firmware MIUI 12 Some options may not be available (e.g., range selection). 2.4 GHz/5 GHz).
• 💳 Tariff plan: y Tele2 There are rates with a restriction on distribution (for example, "My Online.

Pay special attention to the settings APN — Incorrect parameters can block data transmission. Tele2:

To check the current settings, go to Settings → SIM-maps and mobile networks → Tele2 → Access points (APN). If the settings are different, create a new profile manually. After saving, reboot the phone - this is a must for the application of changes.

⚠️ Attention: If on the list APN I already have a profile. Tele2 The Internet, but the Internet doesn't work, delete it and recreate it. Duplicate profiles can cause conflict.

2. Standard method: Distribution via Wi-Fi

This is the most common method, but it requires the right setup.

1. Open the Settings. → Access Point and modem.
2. Select the Wi-Fi Access Point.
3. Click Access Point Settings:

Wi-Fi hotspot

When you turn on, you'll see a notification on the screen with the number of devices connected.

• 🔄 Reboot the access point (turn off and turn on again).
• 📱 Check if the power saving mode blocks the background data transfer (c Settings) → Battery → Energy saving regime).
• 🚫 Make sure the laptop is offline VPN Firewall – they can block the connection.

Network name without spaces and Cyrillic

Password length ≥8 characters

2.4 GHz range for older laptops

Power saving mode is off.

VPN/Laptop firewall turned off-->

If after all the manipulations, the laptop still does not connect, try changing the Wi-Fi channel.

1. Install the WiFi Analyzer app from Google Play.
2. Run the scan and find the least loaded channel in the 2.4 GHz band (e.g., channel 6 or 11).
3. In the access point settings (Settings → Access Point and modem → Access point settings → Additional), select this channel manually.

2.4 GHz (greater radius)

5 GHz (high speed)

Automatic choice

I don't know.-->

3. Alternative ways of distributing the Internet

If Wi-Fi doesn't work for some reason, use alternative methods. They're less convenient, but they often save you in critical situations.

Distribution via USB (USB-ethernet)

This is a good way to use laptops without a Wi-Fi module or when there's a lot of interference.

• 🔌 Stable connection without loss of packets.
• 🔋 Lower battery consumption (the phone charges in parallel).
• 🚀 Speed is limited only by possibilities. Tele2 (Wi-Fi-free).

Instructions:

1. Connect your phone to your laptop through the original USB-cable (cheap cables may not support data transmission).
2. On your phone, select Settings. → Access Point and modem → USB-modem.
3. On the laptop, wait for the driver installation (usually takes 10-30 seconds).
4. Check the connection: a network icon labeled “Ethernet” should appear in the tray.

⚠️ Note: On some Windows laptops 10/11 You may need to manually install the driver. RNDIS. Download it from the official Xiaomi website for your model.

3.2. Distribution via Bluetooth

Less popular, but useful, if other methods are not available.

• 🐢 Low speed (up to 3 Mbps).
• 🔋 High battery consumption on both devices.

How to connect:

1. Activate Bluetooth on your phone and laptop.
2. On the phone: Settings → Connection devices → Bluetooth → find a laptop and confirm pairing.
3. On a laptop: In the Bluetooth control panel, select your Xiaomi and click "Connect to the network".
4. On the phone, turn on Settings → Access Point and modem → Bluetooth modem.

4. Solving common problems

Even with the right setup, Xiaomi and Tele2 users often encounter errors.

“The access point could not be activated”

Causes and solutions:

• 📵 Operator blocks distribution: check the tariff in the My app Tele2. If the distribution is prohibited, try changing the tariff or use it. VPN (1.1.1.1 from Cloudflare).
• 🔧 Failure MIUI: Restart your phone in Safe Mode (click the power button) → "Safe Mode and try to turn on the access point again.
• 📱 Application conflict: Some programs (such as Freedom or NetGuard) block the distribution.

4.2 The laptop is connected, but the Internet is not working

Possible causes:

• 🌐 Wrong settings IP: on a laptop in the properties of the connection set automatic receipt IP and DNS.
• 🔒 Lockdown MAC-Addresses: Some tariffs Tele2 They're tying access to a particular device. MAC-Laptop address (in Windows this is done through Device Manager) → Network adapters).
• 🔄 Failure DNS: manually DNS from Google (8.8.8.8 and 8.8.4.4) or Cloudflare (1.1.1.1).

Low speed or breakage of the connection

Optimization:

• 📶 Change Wi-Fi range: If you use 2.4 GHz, try 5 GHz (and vice versa).
• 🔋 Turn off energy saving: in Settings → Battery → Select Performance Mode "Maximum Performance".
• 📵 Check the cover. Tele2: If the signal is weak, try moving closer to the window or use a repeater.

💡

If the speed drops sharply 1-2 minutes after connecting, check the QoS settings on the router (if the laptop is connected to another network in parallel).

5. Optimization of battery consumption during distribution

Internet distribution is one of the most energy-intensive operations for a smartphone, and to extend the time of operation:

• 🔋 Connect charging: even if the phone shows 100%, Active distribution drains the battery for 2-3 Use the original power adapter. ≥18W.
• 🌡️ Control the temperature: if the phone is heated higher 40°C, disable the access point to 5-10 Overheating leads to trottling (automatic speed reduction).
• 📴 Turn off background apps: Close all programs except the ones you need, especially messengers and social networks that are constantly synced.
• 🔄 Reduce screen brightness: Even if the phone is lying idle, the bright screen consumes up to 20% charge per hour.

For advanced users:

• 🛠️ Enable the Developer Mode (Settings) → The phone. → Version. MIUI → tap 7 times) and turn off Background Optimization for the Settings app.
• ⚡ In Developer Mode, activate Do not turn off the screen while charging – this will prevent the access point from accidentally turning off.

6. Security in the distribution of the Internet

A public hotspot is a potential threat to your data.

• 🔐 Use a complex password: at least 12 characters with numbers, letters and special characters. Avoid simple combinations like 12345678.
• 🕵️ Disable the access point when it is not needed: even if no one is connected to it, attackers can scan networks for vulnerabilities.
• 🛡️ Set up a firewall on your laptop: only allow the necessary connections (for example, for browser and instant messengers).
• 🔄 Change your password regularly: If you share your internet frequently in public, update your password once a week.

For maximum protection:

• 🌐 Use it. VPN On a laptop (like ProtonVPN or Windscribe) this encrypts all traffic, even if someone intercepts your data.
• 📵 Turn it off. WPS In the access point settings (if any) this protocol is vulnerable to brute force attacks.

⚠️ Warning: If you share the Internet at a cafe, airport or other public place, never use an open network without a password. Attackers can connect to your phone and access files or even remotely control your device through vulnerabilities in your phone. MIUI.

7 Hidden MIUI functions for Internet distribution

Xiaomi hides a few useful options that can improve the quality of the distribution, to activate them:

1. Enable the Developer Mode (as described above).
2. Go to Settings → Additional → For developers.
3. Find and turn on:

Another hidden possibility is the change of the MTU (Maximum Transmission Unit), the optimal value for Tele2 is 1472.

1. Connect your phone to your laptop via USB and enable debugging via USB.
2. On your laptop, open the Command Prompt and type: adb shell settings put global. tether_dun_required 0 adb shell ifconfig rndis0 mtu 1472
3. Reset the access point.

Please note: Fare violations may result in a block SIM-map.