How to distribute the Internet from the phone Xiaomi 10 Pro: the complete guide

The modern smartphone has long since ceased to be just a means of communication, becoming a full-fledged control center for the digital world. The flagship Xiaomi Mi 10 Pro has a powerful Wi-Fi 6 module that allows you not only to consume but also to efficiently broadcast high-speed Internet to other devices, a feature that becomes critical for travel, business trips or sudden interruptions in the work of a home provider.

The process of activating the router mode in the shell of MIUI (or its modern version of HyperOS) is as simplified as possible by developers, but hides a number of fine settings. Competent configuration of the access point will allow you to provide a stable signal to a laptop, tablet or even a game console using a 4G or 5G mobile network. In this material, we will discuss in detail all the stages of configuration, optimization and possible difficulties.

Before we get to the technical part, it is worth noting that the quality of the distribution depends directly on the coverage of the cellular network and the tariff plan. Unlimited tariffs often have restrictions on the use of the phone as a modem, so pre-checking the conditions of the operator will save you from unexpected locks or speed reduction.

Basic activation of the access point through settings

The most obvious and frequently used way to enable Internet distribution is in the system menu, so you first need to unlock the screen and open the main app menu, and find the Settings icon, which usually looks like a gear, and tap it to enter the system partition of device management.

In the list of options that opens, you should find the Wi-Fi Access Point. In some versions of firmware, it can be located in the Connection and Sharing subsection or be entered in a separate Connection menu. After you go along this path, you will see a switch that you need to activate. The system will automatically start the wireless module in broadcast mode.

⚠️ Note: When you first turn on, the system may request permission to use geolocation. This is a requirement of Android for the correct operation of the network scanning, so access is better provided.

Once the slider is activated, your Xiaomi Mi 10 Pro will be visible to other devices. However, by default, the network name and password may be standard or inconvenient to remember. It is recommended to immediately go to the access point settings menu to change these settings to unique ones, this will provide basic protection from unauthorized access to your traffic.

Advanced configuration: name, password and security

Security of data is a priority when organizing a wireless network. In the Xiaomi Access Point settings menu, you can specify an arbitrary network name (SSID). You should not use standard names like "Mi 10 Pro", as this gives a model of your device and potentially simplifies the work of hackers who know the vulnerabilities of specific models.

The default system offers the WPA2-Personal encryption protocol, which is the best choice for compatibility with old and new devices. The password must contain at least 8 characters, including letters of different registers and numbers. Avoid simple combinations like "12345678" or date of birth.

In this section, you can often see the feature "Show Device in List" when you turn off this option, the network becomes hidden, you have to manually type in the network name on the gadget you're connecting to it, which adds an additional level of privacy, because random users won't see your access point in the list of available networks.

• 🔒 Use complex passwords from 12+ symbols for maximum traffic protection.
• 📡 Change the standard network name to a neutral one that does not indicate a brand or model.
• 👁️ Hide the network from prying eyes if you use an access point in crowded places.

Remember to change your password periodically, especially if you've been giving the Internet to a lot of different people, and in the menu of connected devices, you can see a list of all the gadgets that are currently using your traffic, and if necessary, block access to a particular user with a single touch.

Frequency range choice: 2.4 GHz vs. 5 GHz

One of the strengths of the Xiaomi Mi 10 Pro is the support of dual-band Wi-Fi. In the settings of the access point, you can choose the broadcast frequency: 2.4 GHz or 5 GHz. Choosing the right range directly affects the data transfer speed and connection stability.

The 2.4 GHz band is more common and compatible, providing better coverage, allowing the signal to overcome walls and obstacles, but this range is often overloaded by neighboring networks, microwaves and Bluetooth devices, which can lead to speed drops and increased ping.

The 5GHz range offers significantly higher data rates and is less prone to interference. It's the perfect choice for 4K video streaming, online gaming, or downloading large files. However, it has a smaller range and the signal travels worse through the capital walls. If you're in the same room with a smartphone router, choose 5GHz.

For most scenarios, using the Xiaomi Mi 10 Pro as a modem for a laptop in a cafe or hotel, switching to 5 GHz will give a tangible performance boost.However, if the client device is far or behind several walls, the system itself may recommend returning to 2.4 GHz to maintain communication stability.

Traffic Limit and Connected Device Management

Mobile Internet is rarely unlimited in the full sense of the word, so data consumption control is vital. Xiaomi hotspot settings have a traffic limit feature, you can set a limit on the amount of data that will automatically stop the distribution of the Internet.

To activate this feature, you need to go to the Traffic Limit Set menu, where you can select units of measure (MB or GB) and enter a threshold value, especially when traveling abroad, where roaming traffic can be very expensive, or when using tariffs with a package of 10-20 GB per month.

⚠️ Attention: The traffic limit in the access point settings is not automatically reset at the beginning of the new month, it must be manually disabled or changed after the operator updates the tariff period.

And the active hotspot menu also shows you a list of all the connected devices, and you can see the name of the gadget and the amount of traffic it consumes, and if you see an unknown device, you can block it by just clicking on the appropriate button, which will prevent you from using your channel any longer.

There is also a “Stop Timer” feature that allows you to set up an automatic shutdown of the access point if no device is connected to it for a certain time (for example, 10 minutes), which helps save battery power Xiaomi Mi 10 Pro, which is consumed quite intensively in modem modem.

Alternative ways of distributing: USB and Bluetooth

Wi-Fi isn’t the only way to turn a smartphone into a modem. If the wireless connection is unstable or requires maximum speed and minimal latency, consider a wired connection via a wireless device. USB. To do this, it is enough to connect Xiaomi Mi 10 Pro cable to the computer and select the mode in the access point menu. USB-modem.

Advantage USB-The connection is that the smartphone simultaneously receives a charge from the computer, compensating for the energy costs of data transmission, and the wired connection is protected from interception of the signal through the air and is not subject to radio interference. Computer recognizes phone as a normal Ethernet network device.

The third option is Bluetooth, which is the least productive method, and is only suitable for small amounts of text or messaging, and the speed is limited by Bluetooth, but the battery consumption is minimal, and you need to attach the devices to activate and turn on the corresponding switchboard in the menu.

• 🔌 USB-The modem provides better stability and speed, ideal for stationary work.
• 🔋 In the case of USB-The cable battery of the phone is charged, which prolongs the running time.
• 🐌 Bluetooth modem is only suitable as an emergency option for easy tasks.

It is worth noting that when you connect via USB, drivers can automatically install on your computer. If this does not happen, the system will suggest finding them online. In most modern Windows 10/11 and macOS, drivers for Xiaomi are built in by default.

Optimizing energy consumption and solving problems

The access point mode puts a high strain on the smartphone’s processor and radio module, resulting in increased heat generation and rapid battery discharge.The Xiaomi Mi 10 Pro features an efficient cooling system, but in hot weather or in direct sunlight, the phone can heat up. In such cases, the system can artificially limit speed or turn off the Wi-Fi module to protect components.

To minimize heat, it is recommended to remove the protective case during a long Internet distribution, especially if you are using the 5 GHz band.It is also worth reducing the brightness of the screen or completely extinguishing it, since the display is one of the main consumers of energy.

💡

Put your phone on a cold surface (such as a ceramic tile or metal desk) while you’re dealing the internet – this will improve heat sink and prevent the processor from trotting.

If connected devices cannot receive IP-If you're not using your address or you're losing your connection, try rebooting your Wi-Fi service on your smartphone. Sometimes resetting your network settings helps, but keep in mind that this will remove saved passwords from other Wi-Fi networks. Also make sure the phone doesn’t have power saving mode on, which can aggressively limit the background processes of the access point.

In rare cases, the problem may lie in the conflict. IP-In the advanced access point settings (if your version) MIUI This allows you to try changing the subnet, for example, from 192.168.43.1 to 192.168.10.1. This helps if the connected device has "remembered" the old address and does not want to update the configuration.

⚠️ Warning: If the phone gets too hot (above 45 degrees), using it as a modem can accelerate battery degradation.

Regular firmware updates Xiaomi Mi 10 Pro often contain bug fixes Wi-Fi module. If you are faced with chronic problems of distribution, check for system updates in the menu About Phone.

💡

Best case scenario: USB-Connection for stationary work with a laptop, Wi-Fi 5 GHz for fast file transfer near, 2.4 GHz for distribution to multiple devices through walls.

Frequently Asked Questions (FAQ)