How to distribute the Internet with Xiaomi Redmi 4X: all the ways and hidden settings

Smartphone Xiaomi Redmi 4X It's still a popular device because of its reliability and its flexible networking capabilities, and you can distribute the Internet from this device in a number of ways, from a standard Wi-Fi hotspot to a standard Wi-Fi hotspot. USB-But many users are faced with the typical problems of slow speed, sudden connection breaks or the inability to connect certain devices. In this article, we will discuss all the current methods of distributing the Internet, taking into account the features of firmware. MIUI (including the latest updates from 2026, and reveal hidden settings that will help stabilize the connection.

The Redmi 4X features dual-band Wi-Fi (2.4 GHz and 5 GHz), but not everyone knows how to properly configure the distribution in each of them. In addition, the device allows you to create closed networks with a password or open for quick connection of guest gadgets. We will discuss each option in detail, and also tell you how to circumvent the restrictions of operators who sometimes block the modem function. If you have previously tried unsuccessfully to configure the distribution, this guide will help you understand the nuances and avoid common errors.

Preparing a smartphone for the distribution of the Internet

Before setting up your access point, make sure your Redmi 4X is ready to run in modem mode.

• 📶 Mobile network signal: Internet distribution requires stable connection 3G/4G. If you have a weak signal (1-2 dividing on the indicator, the speed will be low or the connection will break.
• 🔋 Battery charge: modem modem actively consumes energy. At a charge level below 20%, the smartphone can automatically turn off the access point.
• 📱 Software updates: outdated version MIUI It may contain errors in the operation of the Wi-Fi module. Check the relevance of the firmware in Settings → The phone. → Updating the system.
• 🔒 Operator restrictions: some tariffs block modem function. Check the terms with your provider or temporarily switch to a distribution-enabled tariff (for example, "Unlimited Internet" from MTS or "Super Bit" from Beeline).

If you use two of them SIM-Make sure the internet is activated on the one that supports the map. 4G (usually a slot SIM Switch priority SIM For mobile data, you can use the settings → SIM-maps and mobile networks → Mobile Internet. Power saving mode should also be turned off, as it can limit the performance of the Wi-Fi module.

Method 1: Distributing Wi-Fi through an access point (hot spot)

This is the most popular and versatile method that allows you to connect laptops, tablets and other smartphones to the Internet. On the Redmi 4X, the setup takes no more than a minute, but there are several nuances that affect the stability of the connection.

To enable the access point:

1. Open the Settings. → Access Point and modem.
2. Select the Wi-Fi Access Point.
3. Activate the slider at the top of the screen.
4. Click Access Point Settings to change the network name (SSID), password, and other settings.

By default, the network will be called Redmi. 4X_XXXX (where XXXX — last-minute IMEI), The password is generated automatically, and we recommend changing the network name to a more memorable one (for example, the username, MyRedmi_Hotspot), a) the password is not shorter 8 It's using numbers and letters to protect your access point from unauthorized connection.

Network name (SSID) without spaces and special characters |

Password length of 8+ characters (numbers + letters) |

Wi-Fi range: 2.4 GHz (for compatibility) |

Safety: WPA2-PSK (AES) |

Disable automatic shutdown in case of inaction-->

If after activation of the access point connected devices do not receive the Internet, check:

• 🔄 Rebooting your smartphone: sometimes the Wi-Fi module freezes after the modem is turned on.Rebooting the device helps in 70% of cases.
• 📡 Wi-Fi Range: If your devices can’t see the network, try changing the range from 5 GHz to 2.4 GHz (or vice versa) in the access point settings.
• 🚫 Operator lockdown: send USSD-request *111*088# (for MegaFon or *100*1# (for Beeline) to check if the distribution is allowed on your rate.

💡

If the speed is too low, try turning off the Smart Switch feature in the Wi-Fi settings. It may interfere with the stable operation of the access point.

Method 2: Distribution of the Internet over USB (USB-modem)

This method is suitable for connecting laptops or PCs to the Internet that do not have a Wi-Fi module. USB-modem – more stable connection and lower battery consumption Redmi 4X It's not like Wi-Fi, but it's going to require original work. USB-cable (or quality analogue) and installed Mi drivers PC Suite.

Instructions for setting:

1. Connect your smartphone to your computer through USB-cable.
2. In the Redmi notification menu 4X Select the connection mode Data transfer (or USB-modem if such a point appears automatically).
3. On PC, open Control Panel → Network and Internet → Network connections.
4. Find a new connection called Remote NDIS or Xiaomi... is a virtual network adapter.
5. If the Internet does not work automatically, check the settings of the Properties → IPv4 Protocol (should be ticked on automatic receipt of IP and DNS).

If Windows does not recognize the device, download drivers from the official Xiaomi website (Mi PC Suite section). For macOS or Linux, additional network interfaces may need to be configured via the terminal.

Speed. USB-The modem is usually higher than Wi-Fi, but depends on the port version on the PC. USB 2.0 maximum speed will be ~300 Mbps, and k USB 3.0 – up to 1 Gbps (subject to support) 4G+ operator).

Method 3: Distributing the Internet via Bluetooth

This method is less popular due to its limited speed (up to 3 Mbps), but it can be useful if Wi-Fi and other devices are used. USB For example, to connect an old laptop without a Wi-Fi adapter or devices with a damaged one. USB-The main advantage of Bluetooth is the minimum battery consumption compared to other methods.

To distribute the Internet via Bluetooth:

1. Turn on Bluetooth on both devices.
2. On Redmi 4X, open Settings → Access Point and Modem → Bluetooth modem.
3. Then, put them together (if they are not connected before).
4. On a connected device (such as a laptop) in Bluetooth settings, select Connect via → Access Point.

Please note:

• 🔳 Device Limit: You can only connect one device at a time via Bluetooth.
• 🐢 Low speed: this method is only suitable for easy surfing or instant messengers, and it is better to use Wi-Fi or to view videos or download files. USB.
• 🔄 Automatic shutdown: if during the 5-10 You have no activity for minutes, your smartphone can break the connection. To avoid this, turn off the charge saving function in Bluetooth settings.

If the connection is interrupted, try to “forget” the device on both gadgets and pair again. Also check that the connected device does not tick the “Limited Connection” box in the network settings.

Solving typical problems when distributing the Internet

Even after you set it up properly, Redmi 4X users can still encounter bugs, and we've compiled some of the most common problems and ways to fix them.

If none of these methods worked, try resetting the network settings (see the table above) or performing a hard reboot of the smartphone (press the power button for 10 seconds). MIUI (10).

💡

If the Internet distribution function is lost after the MIUI update, check the Developer Settings (on through 7 clicks on the MIUI version in the About Phone section), there should be enabled the Debugging over USB and Selective Data Transfer disabled.

Hidden settings to improve the distribution of the Internet

The MIUI-based Redmi 4X has several hidden options that allow you to optimize the access point, which are not available in the standard interface, but can be activated through a developer menu or an engineering menu.

Here are the most useful tweaks:

• 🔧 Changing Wi-Fi: By default, the smartphone selects the channel automatically, but in the face of interference, this can lead to breaks. To manually specify the channel, type in the phone dialer ##4636##, select Wi-Fi information → Wi-Fi channel and set the value from 1 to 11 (for 2.4 GHz).
• 📶 Enforcement of use 4G: when the smartphone switches to 3G, The speed of the transfer is dropping to block it. 3G, Go to Settings. → SIM-maps and mobile networks → Preferred network type and select Only 4G (LTE).
• 🔄 Disabling Automatic Disabling of the Access Point: C Settings → Access Point and modem → Additionally (if any) or through the engineering menu (#36446337##) disable the timeout of inactivity.
• 🛡️ Increased security: in the access point settings, change the security type with WPA2-PSK on WPA3-PSK (If it's supported by connected devices, it'll protect you from password selection.

Important: Changing hidden settings can lead to unstable network operation. Before experimenting, write down current settings or back up through Settings → Additional → Backup and Reset.

If you use the hotspot frequently, consider installing custom firmware (like LineageOS), which offers advanced modem settings. However, this requires unlocking the bootloader and may be unwarranted.

Comparison of distribution methods: which one to choose?

Each method has its pros and cons, and here is a comparison table that will help you decide on the choice:

For most tasks, the best choice is a Wi-Fi hotspot, which is suitable for connecting multiple devices simultaneously and provides an acceptable speed. USB-The modem is worth using if you want a stable Internet for a laptop, and Bluetooth is only in extreme cases when other methods are not available.

💡

If you often give out the Internet on trips, buy an external battery capacity of 10,000 mAh. Redmi 4X modem consumes ~10-15% of the charge per hour, so the power reserve is critical.

FAQ: Answers to Frequent Questions