How to distribute the Internet with Xiaomi Redmi: all the ways and hidden settings

Distributing the Internet with Xiaomi Redmi is a task that every second smartphone owner faces. Whether it’s connecting a laptop on the road, giving away Wi-Fi to a tablet, or connecting another phone, mobile hotspot and alternative distribution functions should work smoothly. The access point is not turned on, devices are not connected, or the speed drops to zero. In this article, we will discuss all the current ways to distribute the Internet on Redmi (including Note models). 10/11/12, Redmi 9/10/13C and others), and also solve typical problems - from blocking by the operator to conflicts IP-address.

It’s important to understand that the distribution options are not only dependent on the smartphone model, but also on the MIUI version (even within the same Redmi line, the settings may differ).We took these nuances into account and gave universal instructions running on MIUI 12/13/14 and HyperOS. If your Redmi behaves outside the box, at the end of the article there is a section with a malfunction diagnosis and a table of compatibility of functions by model.

1. Internet distribution via Wi-Fi hotspot (Hotspot)

The most common and convenient way is to convert Redmi into a portable router, a smartphone that distributes Internet over Wi-Fi, which can connect up to 10 devices (the limit depends on the model), the speed of the transfer usually coincides with the speed of your mobile Internet (4G/5G), but can decrease with a large number of connected gadgets.

To enable the access point:

1. Open Settings → Connections and Sharing → Modem Modem.
2. Select Wi-Fi Access Point (or Portable Access Point in older versions of MIUI).
3. Activate the Wi-Fi Access Point slider.
4. Set up the parameters: 🔐 Name of the network (SSID): Think of a unique name (for example, Redmi_Hotspot_5G). 🔑 Password: minimum 8 Use numbers and letters (example: Xiaomi123!). 📶 Range: Choose 5 GHz for less interference (but shorter range) or 2.4 GHz for better compatibility. ⚡ Power saving mode: turn off if you need maximum speed.

Once activated, other devices will see your network in the list of available Wi-Fi. Connect by entering a password. If the access point does not turn on, check if your mobile operator blocks it (more on this below).

Redmi's mobile internet is enabled and working

SIM card supports data transfer (not just calls)

There is enough traffic on the counter (some operators block the distribution at zero balance)

In the settings of the network enabled mode "Data transfer" for the desired SIM-map-->

2. Internet distribution via USB (USB-modem)

If the Wi-Fi on the connected device broke down or you want to save the battery power Redmi, you can distribute the Internet through the Internet USB-This is a method that works for laptops, PCs, and even some TVs with a computer. USB-The speed of the distribution USB Often higher than Wi-Fi, and the smartphone is consumed more slowly.

Instructions for Windows/macOS/Linux:

1. Connect Redmi to your computer via the original cable (preferably with data support).
2. On your smartphone, go to Settings → Connections and Sharing → Modem Modem.
3. Activate the option. USB-modem.
4. On the computer, wait for the driver to install (usually takes 10–30 seconds).
5. Check the connection: A new network called Remote NDIS or similar should appear on the PC.

If the internet doesn't come up:

• 🔌 Check the cable – some cheap wires only support charging, not data transmission.
• 🖥️ Update your modem driver on your PC (download from Xiaomi’s website or through Device Manager).
• 📱 Restart your smartphone and computer.

💡

If Windows can't see USB-Modem, try to turn on Redmi Developer Mode (Settings) → The phone. → Version. MIUI — Press 7 times and activate the debugging USB.

3. Internet distribution via Bluetooth

A less popular, but useful, way to do this is to distribute the Internet over Bluetooth, which is suitable if:

• 📱 Connect a device without Wi-Fi (e.g., old tablets or smartwatches).
• 🔋 You want to save battery life (Bluetooth uses less power than Wi-Fi).
• 🛡️ Security is important to you – Bluetooth connection is more difficult to intercept.

How to set up:

1. Turn on Bluetooth on both devices and pair them (Settings → Bluetooth).
2. On Redmi, go to Settings → Connections and Sharing → Modem Modem.
3. Activate the Bluetooth modem.
4. On the connected device, select Redmi from the list of available Bluetooth devices and connect to the Internet.

Limitations of the method:

• The speed usually does not exceed 1-3 Mbps (enough for instant messengers, but not for video).
• The distance between the devices is no more than 10 meters.
• Some devices (such as iPhones) do not support an Internet connection via Bluetooth from Android.

4. Hidden Access Point Settings: How to Speed Up Distribution

By default, Xiaomi limits the speed of the transfer and the number of connected devices, which can be changed through hidden settings (does not work on all models).

To access the extended parameters:

1. Enable the Wi-Fi hotspot (as in the first section).
2. In the browser address bar on the connected device, type 192.168.43.1 (or 192.168.1.1 if the first address does not work).
3. Enter the username and password (often admin/admin or an empty field by default).
4. Find the Wi-Fi Settings or Advanced section and change it: 📡 Wi-Fi Channel: Select the least loaded (e.g. 6 or 11 for 2.4GHz). 🔄 Security regime: WPA2-PSK — Optimal balance of speed and protection. 🚀 Max. number of devices: increase to 15 (if the firmware allows).

On Redmi Note 12 Pro+ and later with HyperOS, the path to hidden settings has changed: use 192.168.1.2 and check the Band Steering partition – turning it off can increase speed by 15-20%.

5. Why Internet Distribution Doesn't Work: Diagnosing Problems

If the access point is turned on, but the devices are not connected or the Internet is not working, the reasons may be different.

If the problem is not resolved, check:

• 📶 Mobile network signal: with a weak signal (1-2 division), the distribution rate will be low.
• 🔄 APN-Settings: Sometimes operators change the settings APN, What's blocking the distribution. Update them to Settings. → SIM-maps and mobile networks → Access points (APN).
• 🛡️ Antivirus or Firewall: On a connected device, they can block the connection.

Wi-Fi hotspot

USB-modem

Bluetooth

Another way.-->

6. Operator restrictions: how to bypass the distribution block

Many Russian operators (MTS, Beeline, MegaFon, Tele2) block the distribution of the Internet at certain tariffs. DUN-Dial-Up Networking: If you see a notice that says "Connection is forbidden by operator" when you try to enable an access point, your tariff is restricted.

Ways to bypass the lock:

1. Change the tariff: operators usually allow distribution on tariffs marked "Unlimited" or "For modems." For example, MTS is the tariff "All for your own", MegaFon - "Everything is possible."
2. Use it. VPN: set up VPN-an application (e.g., 1.1.1.1 or ProtonVPN) to a device that connects to an access point.This masks traffic and the operator does not block the connection.
3. Root rights + Tethering Enabler: for advanced users. Requires unlocking the bootloader and installing Magisk.

💡

Operators cannot completely block USB distributions – this method often works even on DUN-restricted tariffs.

⚠️ Note: circumvention of operator restrictions may violate the terms of the contract before use. VPN alteration APN Check your tariff rules, some operators, when you see a handout through VPN Can block the SIM card or slow down the speed.

7. Saving battery power when distributing the Internet

Internet distribution is one of the most energy-intensive functions of a smartphone, and if you don't optimize your settings, Redmi can run out in 2-3 hours.

• 🔋 Turn off background activity: in Settings → Battery → Battery Optimization Add Access Point Apps to Exceptions.
• 🌙 Reduce the brightness of the screen and turn on a dark theme – this will reduce the load on the processor.
• 📴 Use it. USB-A modem instead of Wi-Fi, if you connect one device, it consumes 30-40% less power.
• ⚡ Connect Power Bank: Even when handing out, Redmi will charge if the power supply is powered ≥10W.

On models with support for reverse charging (for example, Redmi Note 11 Pro+) you can simultaneously distribute the Internet and charge another phone via USB-C.

1. Connect Redmi to a power source (charging or Power Bank).
2. Activate Reverse Charging in the notification curtain.
3. Connect the second phone with a cable - it will charge while the Internet is distributed.

8. Alternative ways of distributing the Internet

If standard methods do not work, non-obvious solutions can be used:

• 🔗 Distribution applications: PdaNet+ ClockworkMod Tether bypasses the restrictions of operators without root rights.
• 📡 Router mode: Some Redmi models (e.g. Redmi) AX6000) They allow you to connect to your smartphone over Wi-Fi and then relay the signal.
• 🖥️ ADB-commands: for advanced users. e.g. adb shell settings put global tether_dun_required 0 shut down DUN The operator (does not work on all firmware).

⚠️ Note: using third-party distribution apps can lead to a ban on Mi accounts if they modify system files.

FAQ: Frequent questions about giving out the Internet with Redmi