How to distribute the Internet with Xiaomi Redmi 9 Pro: all the ways and hidden settings

The modern Xiaomi Redmi 9 Pro is not only a phone for calls and social networks, but also a full-fledged router in your pocket. The ability to distribute mobile Internet to a laptop, tablet or other phone saves you when traveling, in the countryside or when the main Wi-Fi suddenly turned off. However, not all users know how to properly configure the distribution to avoid problems with connection, slow speed or fast battery discharge.

In this article, we will analyze all available ways to distribute the Internet on Redmi 9 Pro – from standard Wi-Fi hotspot to little-known methods via Bluetooth and other Internet devices. USB-We'll focus on the hidden settings. MIUI, And if you have a problem like, "Can't turn on the hotspot," or your devices can't see your network, at the end of this article, you'll find solutions to some of the most common problems.

1. Preparation of the telephone before distribution of the Internet

Before you turn on the hotspot, make sure your Redmi 9 Pro is ready for this task.Neglecting basic settings often leads to crashes, slow internet, or fast battery drain.

The first thing to check is the mobile network.

• 📶 There is a stable signal on the phone (at least) 2-3 In a low-coating area (e.g. in a basement or outside the city), the speed of the distribution will be extremely low.
• 📱 Mobile Internet enabled: swipe down from the top of the screen and check if the icon is on 4G/LTE or 5G (if maintained).
• 💰 There are enough funds in your account (if you have a prepaid rate), some operators block the distribution of the Internet with a negative balance.

The second is battery status, and if you give the Internet over Wi-Fi or Bluetooth, you significantly increase your power consumption. If you charge less than 30 percent, connect your phone to a charger or use it. USB-Distribution (it is less voracious) and we also recommend disabling background apps that can eat up traffic:

Settings → Applications → Permissions → Autorun

💡

If you plan to distribute the Internet for a long time, activate the energy saving mode in the Internet. MIUI: Settings → Battery → Power saving mode. This will extend the operating time 15-20%.

The third thing is operator restrictions, and some mobile operators, like Tele2 or Yota, default to blocking Internet distribution at certain rates, to check this out:

1. Open your browser on your phone and try to access any website (for example, ya.ru).
2. If the Internet works, but does not give away - the problem is in the settings of the phone.
3. If the Internet does not work even on the phone, contact the operator and check whether your tariff supports the tethering function (internet distribution).

2. Method 1: Distribution of the Internet via Wi-Fi (access point)

This is the most popular and convenient method, as it allows you to connect multiple devices at the same time (up to 10 on the Redmi 9 Pro). USB, But the battery goes down faster.

To enable the access point:

1. Open the settings (cog icon on the desktop).
2. Go to Access Point and Modem (or Network and Internet) → Access Point in New Versions MIUI).
3. Slip on the Wi-Fi hotspot.
4. Activate the slider in the top corner.

By default, the network will be called Redmi. 9 Pro_XXXX (where XXXX — last-minute IMEI), And the password is generated automatically to change the network name or password:

• 🔧 Click Access Point Settings.
• 📝 In the Network Name field, type the desired name (for example, MyRedmiHotspot).
• 🔐 In the Password field, specify a new key (we recommend using at least 8 characters with numbers and letters).
• 📶 In the Security section, select WPA2-PSK (best-case).
• 🔄 Press Save.

The network name does not contain Cyrillic or special symbols

Password is recorded in a secure location (e.g., in notes)

VPN is disabled on the connected device (can block access)

The phone is in the area of confident reception 4G-->

When the access point is turned on, the screen will display a notification with the number of devices connected. To turn off the distribution, swipe down the notification bar and tap the access point active.

Wi-Fi.

Through Bluetooth.

Through USB-cable

I don't use the handout.-->

Method 2: Distribution via Bluetooth (to save charge)

If you need to connect just one device (like a laptop or tablet) and save battery power, Bluetooth handouts will be a good alternative to Wi-Fi. 3 Mbit/s versus 10-50 Mbit/s for Wi-Fi, but also power consumption in the 2-3 less.

Instructions for setting:

1. Turn on Bluetooth on both devices.
2. On Redmi 9 Pro, go to Settings → Devices and connections → Bluetooth.
3. Tapping the name of the device you want to share with the Internet (for example, Lenovo ThinkPad).
4. After pairing, return to the settings → Access Point and modem.
5. Activate the Bluetooth modem slider.

On a connected device (for example, on a Windows laptop), additional configuration may be required:

• 🖥️ Open the settings. → Devices → Bluetooth and other devices.
• 🔄 Find your Redmi 9 Pro in the list and click Connect through → Access point.

Benefits of Bluetooth Distribution:

• ⚡ Lower battery consumption (by 30-40% more cost-effectively).
• 🔒 More secure connection (no password required after pairing).
• 📱 Suitable for Wi-Fi-free devices (such as some smartwatches or older laptops).

Disadvantages:

• 🐢 Low speed (not suitable for streaming videos or downloading large files).
• 🔗 You can only connect one device at a time.

Method 3: Distribution via USB (maximum stability)

If you want the most stable Internet distribution with minimal delays (for example, for online games or video conferencing), use the Internet. USB-This method is also useful if the phone is low in charge. USB port of a laptop or charging will allow you to simultaneously distribute the Internet and charge the device.

Step-by-step:

1. Connect Redmi 9 Pro to your computer or laptop using the original USB-cable (preferably Type-C).
2. On the phone will appear a notification Charge via USB – tap it.
3. Select File Transfer Mode (MTP) or USB-modem (depending on version) MIUI).
4. If the modem modem does not appear automatically, go to Settings → Access Point and modem → USB-modem and activate slider.

On a Windows computer, you may need to install drivers, which are usually installed automatically, but if the Internet is not available:

• 🖥️ Open Device Manager (Win keys) + X).
• 🔍 Find a network adapter called Remote NDIS Xiaomi.
• 🔄 Right-click and select Update Driver.

💡

USB-The handout is the only way that the phone charges and distributes the internet at the same time, and it's ideal for long-term work (e.g., at a conference or on a trip).

Speed. USB-It is comparable to Wi-Fi (before the 50-100 Mbps), but there are nuances:

5. Hidden settings MIUI hand-over

MIUI It offers a few hidden features that will help improve the quality of the Internet distribution, which most users are unaware of, but they can significantly affect the speed and stability of the connection.

1. Change in Wi-Fi range (2.4 GHz or 5 GHz)

By default, the Redmi 9 Pro distributes 2.4GHz internet, which is more prone to interference (especially in apartment buildings). If your devices support 5GHz, you can switch to it for higher speeds:

Settings → Access Point and modem → Access Point setting → Wi-Fi Range → 5 GHz

Note: the 5 GHz network range is smaller, but the speed is higher and there is less interference.

2. Speed limit for connected devices

If you have multiple devices connected to your access point and one of them eats up all traffic (for example, downloads torrents), you can limit its speed:

Settings → Access Point and modem → Device Management → [select device] → Limit speed

3. Initiation of maximum performance mode

This feature temporarily shuts down background processes so that the entire resource of the phone goes to the distribution of the Internet.

Settings → Special features → Performance mode → Enable

💡

Performance mode is useful if you're handing out the Internet for online games or video calls, but remember to turn it off after use, because it speeds up battery life.

4. Network resetting

If the access point is unstable (often shuts down, devices do not connect), try resetting the network settings:

Settings → About phone → Resetting → Resetting Wi-Fi, mobile network and Bluetooth settings

⚠️ Warning: After reset, all stored Wi-Fi networks and associated Bluetooth devices will be deleted.

6. Solving common problems

Even if you set it up properly, you can have errors, and let's look at the most common ones and how to fix them.

Problem 1: Devices can't see the access point

Possible causes and solutions:

• 🔄 Reboot your phone, sometimes a simple reboot helps.
• 📵 Check network visibility. In the access point settings (Settings) → Access Point and modem → Setting up the access point, make sure that the Visible for All option is enabled.
• 📡 Change the Wi-Fi channel. If there are many networks around, they can cause interference. Try manually specifying the channel (for example, 6 or 11 for 2.4 GHz).

Problem 2: Connection is available, but the Internet is not working

This is most often due to operator settings or phone:

• 📱 Check it out. APN. Go to Settings. → SIM-maps and mobile networks → [yours SIM] → Access points (APN) Make sure you have the right profile (usually the Internet or operator name).
• 🔄 Reset your mobile network settings: Settings → SIM-maps and mobile networks → Resetting mobile network settings.
• 🛡️ Turn it off. VPN or proxy on the connected device.

Problem 3: The battery goes down quickly

Internet distribution is a resource-intensive task, and to reduce energy consumption:

• 🔋 Enable the Power Saving Mode: Settings → Battery → Energy saving regime.
• 📴 Reduce the brightness of the screen and turn off the autobrightness.
• 🔄 Use it. USB-Distribution instead of Wi-Fi (if possible).

Problem 4: Internet speed is low

If the speed is much lower than on the phone:

• 📶 Check the signal on the mobile network. If it's weak, try moving closer to the window or outside.
• 🔄 Switch from 2.4 GHz to 5 GHz (if devices support it).
• 📵 Disable all unnecessary connected devices (each additional device “takes away” a portion of the speed).
• 🛡️ Check if the phone is running traffic saving mode: Settings → SIM-maps and mobile networks → Saving traffic.

⚠️ Note: If the Internet speed on the phone is high, and when distributed falls in the 5-10 Now, the problem may be operator restrictions, some tariffs artificially reduce the speed of the feeding.

7. Security in the distribution of the Internet

A public hotspot is a potential security threat, and if you distribute the Internet in a public place (such as a cafe or an airport), attackers may try to connect to your network or intercept data.

1.Use a complex password

Don't leave a standard password generated by your phone.

• 🔢 Number (0-9)
• 🔤 Capital and lowercase letters (A-z)
• 🔑 Special symbols (!@#$%)

Example of a strong password: kL9#pR2!mX.

2. Limit the number of connected devices

In the settings of the access point (Settings) → Access Point and modem → Access point settings can limit the maximum number of devices (e.g., up to a maximum of 3-5). This will reduce the risk of unauthorized connection.

3. disable the access point when it is not needed

Many people forget to turn off the distribution after use, which creates a vulnerability.

Settings → Access Point and modem → Auto-Switch off → After 5/10 minutes of inactivity

4.Use. VPN plug-in

If you are giving out the Internet in a public place, we recommend to include VPN It's going to encrypt your traffic and protect you from possible data interception. VPN:

• 🛡️ ProtonVPN
• 🌍 Windscribe
• 🔒 TunnelBear

5. Check the connected devices

Periodically enter the settings → Access Point and modem → Control the devices and check if there are any unknown gadgets, and if you find someone else's device, turn them off immediately and change the password.

8. Alternative ways of distributing the Internet

If standard methods don’t work or you need additional features, consider these options.

1. Internet distribution applications

There are apps on Google Play that offer advanced access point settings, such as:

• 📲 PdaNet+ — It allows you to distribute the Internet even if the operator blocks the standard function.
• 🔧 ClockworkMod Tether – supports distribution without root rights.
• 🛡️ FoxFi – hides the distribution from the operator (useful to bypass restrictions).

⚠️ Note: Some apps require root rights, which may take away your warranty, and operators may also block accounts for using bypass distribution methods.

2. modem modem via PC

If you have a computer with Internet connection (for example, via Ethernet), you can distribute it to Redmi 9 Pro in reverse order:

1. Connect your phone to your PC via USB.
2. On PC, open the Control Panel → Network Connections.
3. Find your Internet connection (e.g. Ethernet), right-click and select Properties → Access.
4. Allow other users to use the connection and select Local Area Connection (USB).

3.Use of the second telephone as a repeater

If you have a second smartphone (like the old Xiaomi), it can be used as a signal amplifier:

1. On the first phone, turn on the access point.
2. On the second phone, connect to this point.
3. On the second phone, turn on your access point with a different name.

This will expand your Wi-Fi coverage.

FAQ: Frequent questions about the distribution of the Internet on Redmi 9 Pro