How to distribute the Internet with Xiaomi Redmi 8 Pro: all the ways and hidden settings

Xiaomi Redmi 8 Pro is a popular smartphone with support for the Internet distribution module, but not all users know how to make the most of this feature. Unlike the flagship models, there are nuances with setting up the Wi-Fi channel, limiting connected devices and saving battery power. This article will help not only to include the access point, but also optimize its operation for a stable connection.

We will analyze all the current ways of distributing the Internet: from the classic Wi-Fi hotspot to the rarely used one. USB-terminal (which works even with a discharged battery). MIUI 12/14, which will increase the speed of distribution to 30% alteration MTU You will also learn how to bypass the operator’s traffic restriction and why some devices can’t see your Redmi network. 8 Pro.

1. Preparation of the smartphone for the distribution of the Internet

Before turning on the access point, check three key parameters:

📶 Mobile network signal: the screen should be displayed 4G+ or 5G (If supported, with a weak signal (H)+ or 3G) The speed of distribution will fall by 5-10 times.
🔋 Battery charge: at a level below 20% MIUI It automatically turns off the hotspot to save energy. Use a charger if you plan to give out the Internet for a long time.
📱 Updates: in older versions MIUI (below 12.5) there is a connection break bug when connecting more than 3 devices. → The phone. → Updating the system.

Also make sure you have an active rate with Internet distribution permission, and some operators (like Tele2 or Yota) block this feature at cheap rates, and check the restrictions:

Send. USSD-request *100# (for MTS/Beeline) or *111# (for MegaFon).
Call the operator and check if your tariff supports tethering (the official name of the distribution function).

⚠️ Note: If you use eSIM, the access point may not work due to a conflict with the main access point. SIM-In this case, restart the phone and manually select the network in Settings. → SIM-maps and mobile networks → Choice of network.

2. Internet distribution via Wi-Fi hotspot (the most popular way)

This is a standard method that is suitable for connecting laptops, tablets and other smartphones. Speed depends on Wi-Fi 5 (802.11ac) support in your Redmi 8 Pro and client devices.

Open the Settings. → Access Point and modem.
Select the Wi-Fi Access Point.
Activate the Wi-Fi Access Point slider.
Click Access Point Settings to Change: 🔐 Name of the network (SSID): by default, Redmi 8 Pro_XXXX (where XXXX — last-minute IMEI). 🔑 Password: minimum 8 Symbols (we recommend using a combination of letters, numbers and! or # for security reasons). 📡 Security: Choose WPA2-PSK (safest). 🔄 Frequency band: 2.4 GHz (better for range) or 5 GHz (faster but smaller range).

To increase speed, go to the advanced settings (click on the three dots in the upper right corner):

Set the channel width: 40 MHz (by default - 20 MHz).
Turn on Automatic Shutdown after 10-15 minutes without activity (it will save charge).
Turn it off. AP-isolation, if you want connected devices to see each other (for example, to print on a printer).

The network name does not contain spaces or Cyrillic

Password is stored in a secure place (for example, in notes)

VPN is disabled on the connected device (can block access)

The smartphone is in the zone of confident reception 4G-->

The speed of the Redmi 8 Pro is limited by hardware:

Type of network	Max. speed (Mbps)	Delay (ms)	Radio (m)
Wi-Fi 2.4 GHz	72	30–50	10–15
Wi-Fi 5 GHz	433	10–20	5–8
USB-terminal	150	5–10	—
Bluetooth	3	100–200	1–2

⚠️ Note: If the Internet is slow after connecting devices, check Settings → SIM-maps and mobile networks → Network type. Sometimes the smartphone automatically switches to 3G Just put it in the manual. 4G (preferably).

3. Internet distribution via USB (for PCs and laptops)

This method is suitable if you need a stable connection without loss of speed or if the Wi-Fi module on the laptop is broken.

⚡ There is no limit on the number of connected devices (unlike Wi-Fi, where the maximum is 8-10).
🔋 Less battery consumption because no Wi-Fi module is used.
🛡️ More secure: data is transmitted by wire, not by air.

Instructions for Windows 10/11:

Connect Redmi 8 Pro to your computer via the original USB-cable (faulty cables may not transmit data).
On your smartphone, select File Transfer (MTP) mode in the connection notification.
Go to Settings. → Access Point and modem → USB-modem and activate the function.
On your PC, wait for the drivers to install (usually takes 1-2 minutes). If the driver is not installed, download it from the official Xiaomi website.

MacOS will require additional configuration:

1. Open the "Terminal" and enter:


sudo networksetup -setdhcp USB 10.0.0.2




2.Reboot your smartphone and reconnect the USB.

💡

If the computer can't see USB-Modem, try to connect your smartphone to another port (preferably) USB 3.0, marked in blue) Also check if the antivirus (e.g. Kaspersky or Avast) blocks the new network connection.

Speed. USB-The Redmi 8 Pro terminal is limited USB 2.0 (up to 150 Mbps), but that’s enough for the:

🎮 Online gaming (e.g, CS:GO or Dota 2 without lags).
📹 Streaming in 1080p (YouTube, Twitch).
💼 Cloud services (Google Drive, Yandex Disk).

4. Internet distribution via Bluetooth (for saving charge)

This method is suitable if you need to connect one device (for example, a tablet or a second phone) with minimal battery consumption.

⚡ Very low speed up to 3 Mbps).
🔋 Windows laptops often lose connection.
📱 Not all apps (such as Zoom or Discord) are stable.

How to set up:

Turn on Bluetooth on both devices.
On Redmi 8 Pro, go to Settings → Access Point and Modem → Bluetooth modem.
Connect your device via the Bluetooth menu (click on the device name → Connect to access the network).

For stable operation:

📍 Keep devices at a distance of no more than 1 meter.
🔄 Turn off Wi-Fi on your connected device (may cause interference).
🔋 Close the background applications that use the Internet (for example, Telegram or VKontakte).

📊 What Internet Distribution Method Do You Use More Often?

Wi-Fi hotspot

USB-modem

Bluetooth

Don't give away the internet

5. Hidden settings to increase the speed of distribution

MIUI hides a few parameters that can significantly improve connection quality.

Turn on Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
Back to Settings → Additionally. → For developers.
Find and change the following settings: window MTU: Set 1472 (default: 1500, which can cause packet fragmentation) Wi-Fi buffer: Enable Packet Aggregation. Modem mode: select RNDIS + DM + Modem (increases stability) USB-linkage).

It can also be optimized DNS-servers to reduce delay:

Go to Settings. → SIM-maps and mobile networks → Access point (APN).
Select your APN (usually internet.beeline.ru, internet.mts.ru, etc.).
In the DNS field 1 enter 1.1.1.1 (Cloudflare), in DNS 2 - 8.8.8.8 (Google).
Save the settings and restart the smartphone.

What to do if the speed is still low?

1. Check if the connected device has a traffic limit (for example, in Windows this can be in Network Settings). 2. Turn off the VPN on both devices - it can compress traffic and reduce speed. 3. Try changing the Wi-Fi region in the access point settings (for example, from Russia to the USA - this sometimes eliminates the operator's restrictions). 4. If nothing helps, contact the operator with a request to check the service profile (sometimes it is reset after the software update).

6. Solving common problems

Even after setting it up correctly, you can still get errors.

Problem.	Reason.	Decision
Devices do not see the access point	Wi-Fi Channel Conflict	In the access point settings, change the channel to 6 or 11 (less loaded).
The Internet only works on a smartphone	Limitation of operator	Call in support and request the activation of the service "Modem" (sometimes paid).
The access point shuts down itself.	Saving charge	Turn off the Adaptive Battery in Settings → Battery.
Low speed on USB	Faulty cable	Try another cable (preferably original from Xiaomi).

If after all the manipulations the Internet is not distributed, reset the network settings:

Go to Settings → System and device → Resetting.
Select Reset Wi-Fi, Mobile Network and Bluetooth settings.
Confirm the action and restart the smartphone.

⚠️ Warning: After reset, you will have to re-enter passwords from Wi-Fi networks and configure Bluetooth devices (earphones, fitness bracelets, etc.).

7. How to distribute the Internet and save traffic

If you have a limited rate, use these tips to avoid exceeding the limit:

📊 Include the traffic counter in Settings → SIM-maps and mobile networks → Traffic: Set a limit of 90% of your fare to get a warning.
🚫 Block background traffic for unnecessary apps: Go to Settings → Annexes → App management. Select an app (e.g. TikTok or Instagram). Turn off Background data and Auto Run.
🔄 Use traffic compression in Google Chrome browser: Open Chrome Settings → Save traffic. Turn on the option to Reduce data consumption.

For full traffic control, install the NetGuard app (no root rights required):

🛡️ Blocks Internet access for selected applications.
📈 Shows detailed statistics for each application.
🔄 You can set up rules for Wi-Fi and mobile data separately.

💡

The most effective way to save traffic is to disable automatic app updates. Go to Google Play → Settings → Auto-Update apps and select Never.

8. Alternative ways of distributing the Internet

If standard methods don’t work, try these options:

🌐 Reverse Tethering (Sharing Internet from PC to phone): You will need USB-ClockworkMod Tether (requires root rights) is suitable if you have unlimited Internet on your PC and your phone does not.
📶 Wi-Fi Repeater: If you have access to another Wi-Fi network (such as a cafe), Redmi 8 Pro can act as a repeater. To do this: Connect to the original Wi-Fi network. Enable an access point with a different name. On the connected device, select your smartphone network.

The downside: the speed will drop by 30-50% due to dual data transfer.

Outside 4G-modem

If the quality of communication is poor, connect to the smartphone external modem (for example, Huawei). E3372) through OTG-Adapter. Select the settings USB-modem and use the Internet from the modem.

For experienced users, there is a way to distribute through ADB (Android Debug Bridge):

1. Connect your smartphone to your PC and enable USB debugging in the developer settings.


2. Enter in the command line:




adb shell settings put global tether_dun_required 0




3. Reset the device.




This command disables the operator’s check for the distribution of the Internet (does not work on all firmware).

FAQ: Frequent questions

Can I share the Internet with Redmi 8 Pro without a password?

Technically, yes, but it's not secure. To remove the password: Go to Settings → Access Point and modem → Select Security: No. Save settings. ⚠️ Warning: Anyone within a 10-15-meter radius will be able to connect to your network and use your traffic or access local files.

Why does the battery run out quickly when giving out the internet?

Redmi 8 Pro consumes up to 15-20% charge per hour with an active access point. To reduce consumption: Reduce the power of the Wi-Fi signal in the access point settings (select Low instead of High). Turn off Wi-Fi network search in the background (Settings → Wi-Fi → Additional). Use a dark theme and reduce the brightness of the screen to 30%. If you distribute the Internet for a long time, connect your smartphone to a power bank or outlet.

How to give away the Internet on Redmi 8 Pro with two SIM-map?

The smartphone supports the distribution with only one SIM-To change the source: Go to Settings → SIM-maps and mobile networks. SIM-The card you want to give out the Internet from. Turn on the access point, the traffic will go through the selected SIM. Please note that if the second SIM Call active, Internet distribution temporarily suspended.

Can I give away the Internet with Redmi 8 Pro on PS4 or Xbox?

Yeah, but there's nuance: 🎮 PlayStation 4/5: In the console settings, select Settings → Network → Set up an Internet connection → Use Wi-Fi. Enter the hotspot data from your phone. If the console doesn't connect, change Wi-Fi to Wi-Fi. 1–11 (PS4 Does not support channels above 11). 🖥️ Xbox One/Series X: Use it USB-terminal, as Wi-Fi on Xbox often loses connection. Connect your smartphone to the console via cable and activate USB-Modem. For stable play, we recommend: Disable background downloads on consoles. Use 5 GHz (if console supports) Close all apps on your smartphone except the hotspot.

How to distribute the Internet through Redmi 8 Pro on Smart TV?

Most of them are smart. TV (for example, Samsung or LG) Supports connection to the access point, but errors may occur: 📺 TV doesn't see the network: Change Wi-Fi channel to 6 or 11 (many) TV They do not support automatic channels). 🔄 Connection is permanently broken: In the access point settings, turn off Automatic Shutdown and install MTU: 1450. 🎬 Video in the video 4K The smartphone is not able to distribute the Internet at speeds above 100 Mbps, so for Netflix or YouTube in the future. 4K use USB-modem (if) TV supportive).