How to distribute the Internet on the phone Xiaomi Redmi

Modern Xiaomi Redmi smartphones have long evolved from simple callers to powerful multimedia centers capable of performing the functions of a portable router. The situation when a laptop or tablet is left without access to the global network and only a mobile device is at hand is familiar to many. Fortunately, the Android operating system, and in particular the MIUI shell or HyperOS, provides built-in and flexible tools for creating an access point.

The process of distribution of traffic, or teasering, can be carried out in various ways: via Wi-Fi, Bluetooth or USB-Each method has its own features, advantages and disadvantages that directly affect connection speed and battery consumption. In this article, we will discuss all the options available in detail, as well as cover hidden settings that will help avoid connection problems.

It’s worth noting that the menu interface may vary slightly depending on the firmware version, but the logic of the system modules remains the same for the entire ecosystem of the Chinese manufacturer, and the correct configuration of security settings ensures that no outsiders connect to your network.

Preparation of the smartphone and checking the settings

Before you activate the modem modem, you need to make sure that the basic parameters of the mobile connection are configured correctly. First of all, check whether the data is on, since the Internet is only possible when you are actively connected to the network of the cellular operator. → SIM-maps and mobile networks and make sure the switch opposite the SIM card is activated.

An important aspect is the choice of frequency range for the future access point. Modern Redmi smartphones support work in the bands 2.4 GHz and 5 GHz. The first option provides better compatibility with older devices, but has a lower speed. The second range (5 GHz) allows you to achieve maximum data rates, but some older laptops may not see it.

Also, before turning on the distribution, check the traffic limits set by your carrier. Many tariff plans have restrictions on the amount of data transmitted through modem modem, or completely block this feature. If you are not sure about the terms of your tariff, it is better to check the information from the provider to avoid unpleasant surprises in the form of writing off additional funds.

• 📶 Make sure the signal level of the cellular network is stable and exceeds 2-3 division.
• 🔋 Check the battery level, as the Wi-Fi distribution significantly speeds up the discharge of the device.
• 📡 Choose. SIM-card for data transmission, if the smartphone has two active SIMs.

Remember that activating the access point puts an increased strain on the processor and radio module of the smartphone. This can lead to heating of the case, which is especially important for models with a plastic case or in the hot season.

Creating Wi-Fi hotspots for Xiaomi

The most popular and convenient way to distribute the Internet is to create a wireless Wi-Fi hotspot. This method does not require additional cables and allows you to connect several devices at once. To start settings, go to the Settings menu → Wi-Fi Access Point. In some versions of the firmware, this item may be called “Portable hotspot”.

In the menu that opens, you'll see the activation switch for the function. But before you turn it on, you need to configure the security settings. Click on your network name or "Setting up the access point." Here's an SSID that other devices will see when they search, and you'd better use a unique name that doesn't contain any personal data.

⚠️ Warning: Never leave the hotspot open (without a password) and this will allow anyone in range to connect to your internet and potentially access the data being transmitted.

To protect the connection, you need to set a password. The system will suggest you choose the type of encryption, the best option is WPA2-Personal or WPA3, if all your connected devices support this standard. The password should be complex, contain different register letters and numbers to exclude the possibility of matching.

Once you save the settings, you can activate the power slider, you can have the hotspot icon on your smartphone screen, and you can have the status bar, you can look up the network you've created on your laptop or tablet, and you can type in the password you've set to access the Internet.

Distribution of the Internet through USB-cable

If you need maximum connection stability or need to charge your phone while working, the best solution is to use the device. USB-This method allows you to distribute the Internet to a computer using a cable to transmit data, and the main advantage is that the smartphone simultaneously receives power from the Internet. USB-PC port, which compensates for energy costs.

To activate the mode, connect the phone to your computer using an original or quality cable. → Wi-Fi hotspot → USB-The modem will only become active once the cable is physically connected. Turn on the switch and the system will automatically install the required drivers if they are not available in Windows.

Unlike Wi-Fi, USB-Connectivity allows faster data transfer speeds and lower latency (ping), which is critical for online games or video conferencing, and the range is limited by the length of the cable, which increases security, since physical access to the port is necessary for the connection.

It is worth considering that when using USB-Some antivirus programs on the computer may regard the new network connection as potentially dangerous, in which case you will need to confirm the creation of a new network interface in the security pop-up window.

Using Bluetooth to distribute the network

Although Bluetooth technology is inferior in speed to Wi-Fi and wired connections, it remains relevant for older devices or situations where other communication modules are faulty. Data speeds here are limited by the protocol, so you can comfortably only text in messengers or work with mail, but not watch video.

The setup process begins with pairing devices. On a Redmi smartphone and on the receiving device (laptop or tablet), you need to turn on Bluetooth and execute (pairing), confirming the codes on both screens. After a successful connection on the phone, go to Settings → Wi-Fi Access Point → Bluetooth modem and activate the function.

On your computer, you need to go to the settings of Bluetooth devices, find your phone and select the option “Connect through» → «This method is good for its energy efficiency compared to Wi-Fi, but requires pre-configuring pairing, which takes longer.

If the connection breaks, try removing the device from the pairing list and re-setting the pair. Sometimes it helps to reboot the Bluetooth module on both devices. Make sure that the receiving device has Bluetooth adapter properties that allow network access.

Hidden settings and advanced MIUI features

MIUI offers users advanced access point management capabilities that often go unnoticed. One useful feature is setting a traffic limit. You can set a maximum amount of data, after which the distribution will automatically shut down, which helps control packet consumption if you don't have unlimited rates.

There is also a whitelist or limit to the number of connected devices, and the access point settings can set the maximum number of clients (usually up to 10) to prevent channel overload if someone tries to find a password, and some firmware versions have a shutdown timer setting that allows the module to be turned off after a given period of time.

For advanced users with engineering menu or ADB skills, there is a possibility of changing hidden radio module parameters. However, changing the values in the engineering menu without accurate understanding can lead to a loss of warranty or inoperability of the communication module. Standard means can change the Wi-Fi channel manually, choosing the least loaded by neighbors, which will increase stability.

• 🛡️ Use the Security feature to view the list of connected devices in real time.
• ⏱️ Set up automatic shutdown of the access point if no one is connected to it during the period of time. 5-10 minute.
• 📶 Manually choose a Wi-Fi channel (1, 6 or 11) if there are frequent communication breaks.

Newer versions of HyperOS have the ability to stream a smartphone screen with the Internet, but this requires a separate setup via the Translation menu. The standard access point only transmits network traffic without broadcasting the screen image.

Solving common problems and errors

Despite the system's fine-tuning, users may encounter problems connecting, and often devices fail to see the access point or cannot access it. IP-The first step should always be to reboot the smartphone, which resets errors in network services and updates the registration in the operator's network.

If there is internet on the connected device, but the pages do not load, check the settings. DNS. Try to prescribe static on the client device DNS-Addresses such as Google (8.8.8.8) or Cloudflare (1.1.1.1) may also be incorrect, causing security certificate conflicts.

⚠️ Attention: If you are using VPN On a smartphone, by default, the Internet distribution through the access point may not work correctly. VPN-Find the option “Allow” LAN» or "Allow" LAN», So that traffic can be drawn to connected devices.

If your computer sees the network but writes “No Internet access,” make sure the phone has a browser open and any page loaded. Sometimes you need to log in to the operator’s personal account through a pop-up window (Captive Portal), which may not appear automatically on your PC.

💡

If the access point spontaneously turns off, check the energy saving settings» → «Battery" find the mode of operation in the background for system services and set the value "Without restrictions».

If you have persistent speed issues, try resetting your factory access point settings, which will remove saved passwords and configurations, returning the module to its original state, and then reset the network, focusing on password and frequency selection.

Frequently Asked Questions (FAQ)

💡

The optimal balance between speed and convenience provides Wi-Fi access point, but for long-term work with a laptop is better to use USB-cable to avoid smartphone discharge.