Modern smartphones, including popular models from Xiaomi, have long ceased to be just devices for calls. Today they are powerful multimedia centers that can replace the home router in any situation. When a stationary provider fails or you are on a business trip, the Internet distribution function becomes lifesaving. Users often look for ways to distribute the Internet on the Xiaomi 6 or newer models to provide a network laptop or tablet.
In MIUI, the wireless networking process is intuitive, but hidden settings can significantly improve connection stability. Standard settings don't always provide maximum speed, especially in apartment buildings with high ether noise. Understanding the intricacies of setting frequency ranges and security protocols will help you avoid typical errors.
In this article, we will discuss in detail all available methods of traffic transmission, from classic Wi-Fi hotspot to wired connection through the Internet. USB-You will learn how to change standard security settings to protect your data from unauthorized access, and will also consider the specific problems faced by owners of Redmi devices and the security of the device. POCO, and ways to effectively address them.
Preparation of the smartphone to work in modem modem
Before you activate the hotspot, you need to make sure that your device is ready to work in modem mode. The first step is to check the SIM card balance or the availability of available traffic in the operator's tariff plan. Without an active data packet, you will not be able to distribute Internet to Xiaomi 6 or any other model, even if the network indicators show a confident reception.
It is also important to assess the current battery level. Access point mode is one of the most energy-intensive processes, since the radio module runs at increased power to ensure a stable signal. If the battery charge is below 30%, it is recommended to connect the smartphone to the power source to avoid a sudden shutdown at a critical moment.
Check the mobile network settings in the Settings section → SIM-Maps and mobile networks. Make sure the mobile Internet switch is activated and the network type is set to mode. 4G/LTE or 5G In some regions, you may need to manually configure access points. APN, If the operator’s automatic parameters do not work correctly.
☑️ Pre-launch checks
Classic setting of Wi-Fi access point
The main way to distribute the Internet in shaomi 6 is to use the built-in wireless module. First, open the main settings menu and find the Wi-Fi Access Point section. Depending on the version of the MIUI shell, this item may be in the Connection and Sharing category or be entered in a separate menu "More".
Once you log in, you'll see a switch that activates modem modem. However, take your time to connect devices right away. Click on your network name or the "Setting Up AP" button to change standard settings. The system defaults to generate a random name and password, but for ease of use and security, you'd better set your own values.
In the SSID field, enter a clear network name that will make it easy for you to recognize your device in the list of available connections. In the password field, use a combination of letters and numbers at least 8 characters long. WPA3-Personal encryption protocol is the most secure, but if the connected devices are old, select WPA2-Personal for compatibility.
💡
Use complex passwords with a combination of letters and numbers so that neighbors can’t connect to your network and spend your traffic without your knowledge.
Special attention should be paid to setting the frequency range. By default, the smartphone can work in the 2.4 GHz range, which has a longer range, but less speed and high noise. Switching to 5.0 GHz will significantly increase the data rate, but the signal range will decrease, and it will be worse to pass through walls.
Advanced settings and frequency range selection
Deep access point settings allow you to tailor your smartphone to your specific operating conditions. The configuration menu often hides the “Range of frequency of the access point.” Choosing the right option here is critical for connection stability, especially if you plan to use a laptop for video calls or online games.
The 2.4 GHz range is universal and supported by all devices, including old tablets and budget laptops, and has the advantage of being able to skirt obstacles, allowing you to be within a few meters of a smartphone. However, in apartment buildings, this range is often overloaded with signals from neighboring routers, which leads to a drop in speed.
5.0 GHz provides high bandwidth and minimal latency. It is the ideal choice for modern devices that support 802.11ac or later. If you are in an area with a lot of wireless networks, switching to this frequency can do wonders, eliminating connection breaks and lag.
| Parameter | 2.4 GHz | 5.0 GHz |
|---|---|---|
| Transmission speed | Up to 150 Mbps | Up to 800+ Mbps |
| Radio of action | High-pitched | Medium. |
| Pathability of walls | Good. | Low. |
| Workload | Tall. | Low. |
Also in the advanced settings you can find the option “Maximum number of connections”. By default, Xiaomi system often limits the number of customers to 8 or 10 devices. If you need to distribute the Internet on Xiaomi 6 at once to several gadgets, make sure that the limit is not exhausted, otherwise new connections will be rejected.
Hidden Engineer Teams
Alternative ways to transfer traffic: USB and Bluetooth
Wireless is not always the best solution. In situations where maximum stability is required or when the smartphone battery is critically discharged, it is advisable to use wired methods. USB-cable, which simultaneously provides data transfer and charging of the device from the computer.
For activation USB-In the modem, connect your smartphone to your PC using a high-quality cable. Then go to the Wi-Fi Access Point menu and find the item «USB-Note that this item becomes active only after the cable is physically connected. The computer automatically recognizes the new network connection and installs the necessary drivers.
The Bluetooth modem is the least productive way, but it can help in emergencies when other interfaces are not available. The speed of transmission is limited by the Bluetooth protocol, but it is quite enough for texting or working with mail. The process of pairing devices takes longer than connecting over Wi-Fi.
The advantage of wired connection is the absence of radio interference and the inability to intercept the signal by unauthorized persons. USB-The modem's power consumption of the smartphone is reduced as it is charged from the computer port, which allows you to work in modem mode for almost unlimited time.
Operator restrictions and connection security
Many users face a situation where the access point is turned on, but the Internet on connected devices does not work, often because of restrictions on the part of a mobile operator. unlimited Internet plans often contain hidden conditions that prohibit or limit the distribution of traffic to other devices.
Operators determine the Internet distribution by the TTL (Time To Live) parameter. When you connect a laptop to a smartphone, the data packets have a different TTL than the standard value of the mobile device, the operator sees this difference and either blocks the connection or starts writing off the additional fee.
⚠️ Note: Attempts to circumvent operator restrictions by modifying TTL may violate the terms of the contract for the provision of communication services. Use such methods only within the framework of the law and at your own risk.
Security should also be addressed: Open access points make your smartphone vulnerable to attack, attackers can intercept unencrypted data transmitted over the network, and always use strong WPA2/WPA3 encryption and a complex password.
Check the list of connected customers in the hotspot menu regularly. If you see an unfamiliar device there, change your password immediately and turn off the function. WPS, The “Black List” feature in Xiaomi settings allows you to block specific MAC-address.
Solving Typical Connection Problems and Errors
Despite the reliability of Android, users sometimes encounter errors, and one of the most common problems is that devices see the network but can't connect, in which case you can change the type of security in the access point settings or reset the network settings on the connected gadget.
If there is internet on the connected device, but the pages do not load, check the settings. DNS. Try to manually prescribe. DNS-servers from Google (8.8.8.8) or Cloudflare (1.1.1.1) in the mobile network settings of the smartphone-deliverer.
Another common cause of failure is energy saving: MIUI aggressively optimizes background processes and can turn off the access point to save charge. Go to the battery settings, find the application responsible for the access point, and set the "No Limits" mode.
⚠️ Warning: During prolonged operation in modem modem, the smartphone can become very hot. Remove the protective case and do not cover the device with a cloth to avoid overheating and possible damage to the battery.
In some cases, it helps to simply restart the communication modules. 10-15 So, you can turn it off, and it'll re-register the SIM card on the operator's network and update it. IP-address, which often eliminates temporary disruptions in the mobile Internet.
💡
If standard methods don’t help, resetting network settings to factory settings often solves the problem of software conflicts, but remember to keep important Wi-Fi passwords.