How to change Wi-Fi on the camera Xiaomi: 3 working ways + mistake-making

Changing the Wi-Fi network on Xiaomi cameras is a challenge that every owner will sooner or later face. Whether it’s moving to a new apartment, changing a router or simply wanting to switch to a more stable network, the procedure requires care, especially if the camera is already tied to the Mi Home or Xiaomi Home account. Unlike smartphones, where changing the network takes seconds, smart cameras have their own nuances: from Wi-Fi frequency restrictions to the need to reset settings if errors occur.

In this article, we will discuss three official ways to change Wi-Fi – through the application, using reset to factory settings and an alternative method for cameras with support for Mi Home Developer Mode. We will also focus on common errors (codes 7201, 7202, 7206) and how to fix them, as well as give recommendations on choosing the optimal router settings for stable camera operation.°, Mijia 1080p, Xiaomi Smart Camera C300 Suddenly stopped connecting after changing the network – here you will find a solution.

1.Preparation for Wi-Fi Change: What to Check Before Starting

Before you start setting up, make sure your network meets the requirements of Xiaomi cameras.Most models (except for the new Xiaomi Camera lines) 2K/4K) Only support networks 2.4 GHz Attempt to connect to a 5 GHz network will result in error 7201 ("I couldn't connect to the network").

Here are the key parameters worth checking:

• 📶 Wi-Fi frequency: 2.4 GHz (enable compatibility mode if the router is dual-band).
• 🔒 Type of encryption: only WPA2-PSK (AES). WPA3 and TKIP unsupported.
• 📵 Hidden net (SSID): Xiaomi cameras don’t connect to hidden networks – turn on name broadcast.
• 🔄 Wi-Fi: Avoid automatic selection (channels 1, 6 or 11 are the best option).

Also make sure that:

• 📱 The smartphone that is configured has Wi-Fi and mobile internet enabled (Mi Home requires access to the cloud for synchronization).
• 🔋 The camera is connected to the power supply and is within range of the network (no further than 5 meters from the router at the configuration stage).
• 🔄 The router does not block the devices by MAC-address (turn off filtering if it is active).

⚠️ Note: If your router uses the "Customer Isolation" function" (AP Isolation, the camera will not be able to connect to the Xiaomi cloud even after successfully binding to Wi-Fi.

2. Method 1: Change Wi-Fi via Mi Home app (no reset)

This is the easiest method, but it only works if the camera is currently connected to the old network and available in the application. If the device is offline, go to Method 2 (reset settings).

Instructions:

1. Open the Mi Home app (or Xiaomi Home for new models).
2. Go to the Devices tab → Choose your camera.
3. Tap the three-point menu (⋮) top-right → Settings.
4. Select Wi-Fi networks (or Network depending on the version of the application).
5. Enter the password from the new 2.4 GHz network and confirm.

If you have an error 7206 ("Unconnected") after entering your password, follow these steps:

Restart your router and camera (turn off power for 30 seconds)

Make sure your smartphone is connected to the same 2.4GHz network as the camera.

Check if the antivirus/firewall blocks the Mi Home application from accessing the network

Try connecting from another smartphone (Android/iOS)-->

Some models (e.g. Xiaomi Mi Home Security Camera) 2K) After changing Wi-Fi, you may need to re-link to your account:

1. In the app, go to Profile → Settings → Shared access devices.
2. Find the camera in the list and tap Delete the device.
3. Then add it again through Add the device (+) → Camera.

💡

If the camera after changing Wi-Fi shows the status of "Offline", but the indicator on the case is blue - try manually update the firmware through Settings → Update of the Software in the annex.

Method 2: Resetting the camera to factory settings

If the camera is not connected to the old network (for example, after replacing the router) or the first method does not work, you will need a complete reset.

Resetting instructions:

1. Turn off the camera for 10 seconds, then plug it back in.
2. Wait until the indicator on the case starts flashing yellow (connection waiting mode).
3. Press and hold the Reset button (usually located on the bottom panel) for 5-10 seconds until you hear a voice message "Reset successful" or the indicator flashes orange.
4. Release the button – the camera will restart and be ready for a new setup.

After reset, add the camera to the Mi Home app as a new device:

1. In the app, tap Add the device (+) → select the Camera.
2. Follow the instructions on the screen: select your model, scan QR-code from the camera body (or enter) ID manually).
3. Connect to the temporary network Xiaomi_XXXX (The password is usually shown on the camera sticker).
4. Select a new 2.4GHz Wi-Fi network and enter a password.

⚠️ Attention: On the cameras Xiaomi Mijia 360° 1080p (Models 2018-2019) after reset may require updating the firmware manually through MicroSD. Download the latest version of the software from the official website and follow the instructions in the archive.

Method 3: An alternative method for advanced users (Mi Home Developer Mode)

If the standard methods do not work, and the camera supports the developer mode (available on models with firmware). 1.5.0_00.24 You can also try changing Wi-Fi via ADB This method requires technical skills and is suitable for Xiaomi Smart Camera models. C400, Mi Home Security Camera Pro and others.

Step-by-step:

1. Connect the camera to the computer USB (Use a cable that supports data transmission).
2. Install the drivers. ADB (You can download from the Android Studio website).
3. Open the command line (Win) + R → Type in cmd) and execute: adb devices If the camera is selected (a serial number will appear), enter: adb shell su nmcli dev wifi connect "Name network" password password password"
4. Reboot the camera with the command: reboot

For models without ADB-access (e.g. Mijia) 1080p) You can use Telnet:

1. Connect the camera to the router via Ethernet (if there is a port).
2. Find her. IP-address in the list of connected devices (via the router administrator panel).
3. In the command line, run: telnet [IP_login: root password: (usually empty or 123456)
4. Enter a command to change the network: iwconfig wlan0 essid "Name network" key s:password

⚠️ Attention: Use Telnet/ADB This can lead to camera locking if you type the wrong commands, and this is a method that is recommended only for advanced users. UART.

5. Common mistakes and their solutions

When changing Wi-Fi on Xiaomi cameras, users often encounter the following errors:

Additional problems and solutions:

• 🔴 The camera does not respond to the Reset button: check that the power is stable (use the original power supply). 1080p) The button only works when you hold 15.+ seconds.
• 📡 Permanent shutdowns after changing Wi-Fi: disable the Band Steering function in the router (automatic switching between the two devices) 2.4/5 GHz) and lock the channel manually.
• 🔄 Cyclical camera reboot: This indicates a damaged firmware. Repair through Mi Home → Settings → Software Update (download the firmware file in advance to MicroSD).

💡

If the camera is not identified in the app after the reset, try removing it from your Mi Home account via the web version: account.xiaomi.com → "Device management".

6. Optimal router settings for Xiaomi cameras

To avoid connection problems, configure the router according to the following recommendations:

• 📡 Mode of work: 802.11n (or 802.11b/g/n Turn it off. 802.11ac (5 GHz).
• 🔒 Encryption: WPA2-PSK (AES). Turn it off. WPA3 and TKIP.
• 📶 Channel: fixed (1, 6 or 11) Avoid automatic selection.
• 🔄 MTU: set the value 1400 (often costs 1500 by default, which can cause packet fragmentation).
• 🛡️ Firewall: Add the camera to exceptions (allow outbound connections to ports 80, 443, 8888).

For TP-Link routers:

1. Go to Wireless Mode → Wireless mode settings.
2. Set channel width: 20 MHz (reduces interference).
3. Turn it on. WMM (Wi-Fi Multimedia to prioritize camera traffic.

For routers. Xiaomi/Redmi:

1. Open the Wi-Fi settings → Additionally.
2. Disable Smart Channel Switching and Protection from ARP-spam.
3. Turn on Multicast (required for video streaming).

💡

If you have a dual-band router, create a separate network. 2.4 GHz is specifically for smart devices. Call it something like this, Xiaomi_2.4G, avoid confusion.

7. Frequent Questions and Myths About Xiaomi Cameras

Let’s look at some of the common misconceptions and questions that arise when changing Wi-Fi:

Myth 1: “Xiaomi cameras only work with Xiaomi routers.”

❌ Reality: Cameras are compatible with any routers that meet the requirements (2.4 GHz, WPA2). Problems arise from incorrect settings, not the brand of equipment.

Myth 2: “After a reset, the camera loses its warranty.”

❌ Reality: Factory reset is a standard procedure provided by the manufacturer. The warranty is maintained unless you make firmware changes.

Question: “Can I connect the camera to the mobile Internet (4G)? "

✅ Answer: Direct connection to the 4G No, but you can use it:

• 📶 Router with support 4G (For example, Xiaomi Mi Router 4G).
• 📱 Access Point Mode on Smartphone (Create a 2.4GHz Network).
• 🛜 USB-Wi-Fi modem (e.g. Huawei) E5577).

Question: Why does the camera connect to Wi-Fi but not broadcast video?

✅ Answer: The reasons may be as follows:

• 🔌 Insufficient power supply: use the original power supply (5V/2A).
• 🌐 Traffic blocking: check if the provider restricts outbound connections.
• 📦 Router congestion: disable other devices consuming traffic (torrents, online games).

FAQ: Quick answers to popular questions