How to change Wi-Fi on a robot vacuum cleaner Xiaomi: 3 proven ways

Xiaomi’s robot vacuum cleaners have become an integral part of smart homes, but what if you change routers, move or just want to connect your device to another network? Changing Wi-Fi on Mi Robot, Viomi or Dreame vacuum cleaners often raises questions — especially when the Mi Home app refuses to see the device or gives an error “failed to connect.” In this article, we will examine all working methods, including hidden functions that are not described in the official documentation.

The main problem is that many users try to simply “forget” the network in the smartphone settings, but this does not affect the stored data in the vacuum cleaner itself. Moreover, some models (for example, Xiaomi Mi Robot Vacuum-Mop 2 Pro) block reconnection to the new network without completely resetting if the previous attempt was unsuccessful. We tested all methods on current firmware in 2026 and identified those that work even with outdated versions of the software.

Preparation: What to Know Before Changing Wi-Fi

Before you start setting up, make sure your robot vacuum cleaner is compatible with the new router.Some budget models (e.g. Xiaomi Mi Robot Vacuum) 1S) Not supporting 5GHz networks or security standards WPA3. If your router only works in the 5GHz band, you will have to temporarily activate 2.4GHz or create a guest network.

Also check:

• 🔋 Battery charge – must be at least 20%, otherwise the vacuum cleaner will turn off during the setup.
• 📶 Signal strength – the robot should be no further than 3 meters from the router (walls and partitions weaken the signal).
• 📱 App Version – Mi Home or Xiaomi Home must have the latest version (update to Google) Play/App Store).
• 🔄 Account Region – If you move to another country, change your Mi Account region, otherwise the vacuum cleaner may not appear in your device list.

Note: if you are using a Mesh system (e.g. Xiaomi Mi Wi-Fi Router) AX6000), temporarily disable the Smart Node Switch function, which may interrupt the connection process. To do this, go to the router settings at 192.168.31.1 and deactivate the option in the Wi-Fi section. → Mesh settings.

Method 1: Change Wi-Fi via Mi Home (no reset)

This is the fastest method, but it only works if:

• 🔄 The vacuum cleaner is already connected to the old network and is displayed in Mi Home.
• 📡 The new network uses the same range (2.4 GHz) as the old one.
• 🔐 The password of the new network does not contain Cyrillic or special characters (for example, the password of the new network, #, $, %).

Instructions:

1. Open the Mi Home app and go to the Devices tab.
2. Select your robot vacuum cleaner and tap on the three-point menu (⋮) top-right.
3. Click on “Wi-Fi Settings” (or “Change Network” in newer versions of the app).
4. Follow the instructions on the screen: the application will prompt you to connect to the vacuum cleaner’s temporary network (the name will begin with the name of the vacuum cleaner). mirobot_ or rockrobo_).
5. After connecting, select a new network from the list and enter a password.

If the vacuum cleaner does not reconnect and gives an error "Can not save the settings", try to disable the "Client Isolation" function in the router - it blocks the interaction of devices in the local network.

⚠️ Note: Some models (e.g. Dreame) D10 Plus) require confirmation of network change via a physical button on the case. After entering the password in the application, press and hold the button. HOME vacuum cleaner for 3 seconds.

Method 2: Complete resetting of settings (if the vacuum cleaner is not connected)

If the first method didn’t work or the vacuum cleaner didn’t show up in Mi Home, you’ll have to reset to factory settings, which will remove all stored room maps, cleaning schedules and customizations, so use this method only as a last resort.

Step-by-step:

1. Turn on the vacuum cleaner by pressing the power button (on some models you need to hold it for 5 seconds).
2. Find a button on the body. RESET (It is usually hidden under the cover or near the USB-On models without a physical button, the reset is performed via the combination: Hold the buttons "HOME" + "Spot Cleaning: 10 seconds before the voice alert.
3. After resetting, the Wi-Fi indicator on the vacuum cleaner will start flashing orange (or blue on new models).
4. In the Mi Home app, click "Add Device" (+) and select your model from the list.
5. Follow the setup wizard when the vacuum cleaner prompts you to connect to its time network (mirobot_XXXX).

If after resetting the vacuum cleaner does not make sounds and does not blink, check:

• 🔌 Is it connected to a charging station (some models block reset without power).
• 🔋 Charge level (at a discharge below 15%, the reset may not work).
• 🔧 Integrity of buttons (on models with touch buttons, try pressing with effort).

💡

If after resetting the vacuum cleaner does not connect to the new network, try temporarily disabling the router protection. WPA3 switch to WPA2-PSK. This will solve the problem of compatibility with old firmware.

Method 3: Manual connection via configuration file (for advanced)

This method is suitable for users who are not afraid to work with console commands and have experience in configuring network devices. It allows you to change Wi-Fi without resetting settings, saving room maps. Attention: wrong actions can lead to a device blink (firmware breakage).

What you need:

• 💻 Computer with Windows/Linux macOS.
• 🔌 USB-Type-C Cable (for models with debugging port).
• 📦 Adb (download from the official Android website).
• 📄 Network configuration file (you can create manually).

Instructions:

1. Connect the vacuum cleaner to the computer through USB and turn it on.
2. Open the terminal (cmd on Windows or Terminal on the Mac/Linux) and follow the command: adb devices If the device is not displayed, install drivers for Rockchip (chipset of most Xiaomi vacuum cleaners).
3. Download the current Wi-Fi configuration: Adb pull /data/misc/wifi/WifiConfigStore.xml
4. Open the file. WifiConfigStore.xml in the text editor and find the lines: <string name="SSID">net-name</string> <string name="PSK">passcode</string> Replace them with the data of the new network.
5. Save the file and download it back: adb push WifiConfigStore.xml /data/misc/wifi/
6. Reboot the vacuum cleaner with the command: adb reboot

⚠️ Warning: After manually editing the configuration, the vacuum cleaner may lose communication with Xiaomi servers. To restore cloud access, reconnect it to Mi Home via the Add Device section" → "I already have a device".

Common mistakes and their solutions

Even if you follow the instructions correctly, users face typical problems, and we've collected the most common errors and ways to fix them:

If the vacuum cleaner is connected to the network, but in Mi Home it appears as “Offline”, check:

• 🌍 Server Region – Select China (even if you are not in China) in the app settings, then go back to your region.
• ⏳ Synchronization time – the vacuum cleaner and smartphone should have the same time (enable automatic synchronization).
• 🔄 Cloud-based tethering – in the web version of Mi Home (home.mi.com), check if the vacuum cleaner is linked to another account.

💡

If the vacuum cleaner loses the maps of the premises after changing Wi-Fi, restore them through a backup in Mi Home (section "Device settings" → "Backup").

How to save settings after changing Wi-Fi

One of the biggest disappointments of the network change is the loss of stored maps of premises, cleaning schedules and no-go zones. To avoid this, use the backup function in Mi Home:

Instructions for saving settings:

1. Before changing Wi-Fi, open the vacuum cleaner settings in Mi Home.
2. Go to the section "General settings" → "Backup and restoration".
3. Click on “Create backup” and wait until the process is complete (it can take up to 5 minutes).
4. After connecting to the new network, restore the settings from the same section.

If the backup is not restored, try:

• 📱 Remove the vacuum cleaner from Mi Home and add it again via "I already have the device".
• 🔄 Reboot your router and smartphone before restoring.
• 📡 Temporarily disable Dual Authentication in your Mi Account (it can block access to cloud data).

For models with local control support (for example, Xiaomi Mi Robot Vacuum-Mop 2 Ultra), you can export room maps manually:

1. Connect to the vacuum cleaner SSH (root access required).
2. Copy files from the folder /data/map/ computer.
3. After changing Wi-Fi, return the files.

⚠️ Warning: Manual export of cards only works on firmware with debugging enabled; on newer models (2023-2026), this method may be blocked by the manufacturer.

Changing Wi-Fi on vacuum cleaners with AliExpress (Xiaomi clones)

If you bought a robot vacuum cleaner on AliExpress or Banggood, chances are it’s a clone of a Xiaomi brand (like Deebot, ILIFE These devices often use Tuya Smart or Smart Life instead of Mi Home, and the Wi-Fi change process is different.

How to identify a clone:

• 🏷️ The box does not have an official Xiaomi logo (only the inscription "Compatible with Mi Home" is included").
• 🔍 Wi-Fi settings don’t mention rockrobo or mirobot.
• 📱 The app requires a connection via Tuya Smart or EWeLink.

Instructions for clones:

1. Remove the vacuum cleaner from your current app (Mi Home or Tuya Smart).
2. Reset settings by holding the Wi-Fi button for 10-15 seconds (before the beep).
3. Install the Smart Life app (available for the iOS/Android).
4. Add the device via "Other devices" → "Robot vacuum cleaner".
5. Select a new network and enter a password (clones often only support 2.4 GHz).

If the clone does not connect to any application:

• 🔧 Check if it's blocked. MAC-router.
• 📡 Change the Wi-Fi channel in router settings to 1, 6 or 11 (clones do not work well on automatic channel selection).
• 🔄 Re-flash the vacuum cleaner on the official firmware Xiaomi (instructions are on the forums) 4PDA or XDA Developers).

FAQ: Frequent questions about changing Wi-Fi on Xiaomi vacuum cleaners