How to connect to Xiaomi Registrar via Wi-Fi: a complete guide with pictures and tips

Xiaomi DVRs are some of the most popular video surveillance devices in Russia, but their initial setup is often questionable. It's especially difficult to connect to the registrar via Wi-Fi if the instruction is in Chinese and the Mi Home app says "I couldn't connect." In this article, we'll look at all the ways you connect from the standard to the standard. QR-code before manually entering network data, and also tell how to fix typical problems: connection drop, incorrect password or no sound in the application.

It is important to understand that the connection algorithm may vary depending on the model. for example, for the Xiaomi Mi Home Security Camera 360 registrars.° and 70mai Dash Cam uses different applications (Mi Home and Mi Home) and 70mai And older devices like the Yi Dome Camera may require additional firmware manipulation, and we’ve put together universal solutions that work for 90% of Xiaomi’s 2018-2026 models, including budget and premium series.

If you've tried to connect and you've failed, don't rush to reset the recorder to factory settings. 80 percent of the time, the problem is solved by changing the type of network encryption or rebooting the router. And for those who've just unpacked the device, we've prepared a step-by-step instruction with pictures and videos (see section below).

1.What Xiaomi registrars support Wi-Fi connectivity?

Not all Xiaomi devices can work over a wireless network, and here are the key categories that support Wi-Fi connectivity:

• 📹 IP-Home Security Camera: Mi Home Security Camera 360°, Mi Home Security Camera 2K, Xiaomi Smart Camera C300. Connect to the Mi Home app.
• 🚗 Car recorders: 70mai Dash Cam 1S/Pro/Pro Plus, Xiaomi MiVue 798/758. They use proprietary software. 70mai MiVue Manager or MiVue Manager.
• 🔄 Hybrid devices: Xiaomi Mi Sphere Camera 360° (It can work as a home camera and as a recorder, requiring a separate setup for each mode.

Note: Autonomous recorders without Wi-Fi (e.g. Xiaomi Mi Car) DVR Early versions) can only be connected via cable or memory card, and you can specify supported protocols on the device box or in the characteristics on the website mi.com.

If your model is not included in the list, check its compatibility by serial number (located on the bottom of the device or under the battery).

1. Go to the Mi Home website.
2. Enter the serial number in the "Device Check" field.
3. See the section "Methods of Connection".

2.Preparation for connection: what to do before setting up Wi-Fi

Before connecting the registrar to the network, follow the mandatory preparatory steps:

Make sure the router supports 2.4GHz (5GHz is not suitable for most Xiaomi cameras)

Check that the Wi-Fi password contains only Latin letters and numbers (without Cyrillic and special characters)

Charge the recorder to at least 50% (for car models - connect to the lighter)

Install the latest version of the Mi Home app or 70mai app Store/Google Play

Shut down. VPN Firewall on your smartphone (they can block the connection)-->

The most common mistake is trying to connect to a 5 GHz network. Most Xiaomi registrars (except for the flagship models of 2023-2026) only work at 2.4 GHz (SSID), Separate them in the router settings:

1. Go to the router control panel (usually at 192.168.0.1 or 192.168.1.1).
2. Find the section "Wireless" (Wireless).
3. Turn off the Band Steering option or set different names for 2.4 and 5 GHz.

Another nuance is the type of encryption. Xiaomi's registrars only support WPA2-PSK (AES). If you have WPA3 ormixed (WPA/WPA2), Change the router settings, otherwise the device will either not connect or will permanently break the connection.

⚠️ Note: If you use a guest network or public Wi-Fi (such as in a cafe), connection is not possible. Xiaomi registrars require full access to the local network with the right to transfer data.

3. Step-by-step instruction: Connect via the Mi Home app

This method is suitable for home use. IP-Cameras (Mi Home Security Camera, Xiaomi Smart Camera, etc.) Follow the instructions:

1. Install the Mi Home app (Android: Google Play, iOS: App Store).
2. Sign up or sign in to your Xiaomi account (be sure to link your phone number to restore access).
3. Add the device: Press "+" In the upper right corner, select Camera. Find your model in the list (if not, select Other Device").
4. Scanner. QR-Code: On the back of the registrar, find a sticker with QR-Point the phone camera at the code (distance: 10-15 cm) and wait for the sound signal (squeak) from the camera.
5. Select Wi-Fi network: The app will prompt you to select a network. Make sure it's 2.4 GHz. Enter a password (Latin characters only!). Press "Next" and wait for the connection (up to 2 minutes).

If QR-The code is not readable, try manual entry:

1. In the device add menu, select "Add manually".
2. Enter the serial number (under the QR-code).
3. Follow the instructions of the application to connect to Wi-Fi.

Once connected successfully, the camera will appear in the Mi Home main menu.

• 🎥 Watching videos in real time.
• 🔔 Set up traffic notifications.
• 🔊 Enable two-way audio communication (if supported by the model).

4. Connection of the car recorder 70mai Wi-Fi

For car recorders (70mai Dash Cam, Xiaomi MiVue) uses a separate app — 70mai (Android/iOS). The algorithm of the setting is different:

1. Turn on the recorder: connect it to the lighter or charger.
2. Activate Wi-Fi: Press the Wi-Fi button on the case (or hold the Menu button for 3 seconds). The blue light will light up, which means that the recorder has created its access point.
3. Connect your phone to the registrar network: In your phone’s Wi-Fi settings, find a network called 70mai_XXXX or MiVue_XXXX. Connect to it (password usually) 12345678 or specified in the instruction).
4. Launch the application 70mai: The app will automatically find the registrar. Follow the instructions on the screen to link to the account.
5. Set up a home Wi-Fi connection: From the registrar menu, select "Wi-Fi settings." Specify your network name and password (2.4 GHz!). Wait for the reboot (the registrar will sound).

After that, the registrar will automatically connect to your Wi-Fi when you turn on.

• 📱 View records from the memory card through the application.
• 🚗 Receive notifications of accident or sudden braking (if supported by the model).
• 🔄 Update firmware over the air (OTA).

⚠️ Attention: Car Registrars 70mai If you go outside the range of your Wi-Fi, the connection will break, and the record will be stored only on the memory card.

5. Typical errors and their solutions

Even with the right setup, there can be problems. TOP-5 errors and ways of correcting them:

If the logger connects but falls off after 5-10 minutes, the problem may be in the router's power saving settings. Turn off the Wi-Fi Multicast Forwarding option (some routers call it "Multicast Forwarding") IGMP Also check if the sleep timer is on the recorder (in the app settings).

💡

If the registrar is not connected to Wi-Fi, try creating a guest network on a router with a simple password (for example, 12345678) and no encryption. Once the connection is successful, return the basic settings.

6. Alternative ways to connect (if Wi-Fi is not working)

If wireless connectivity is not possible (e.g., no router or no registrar supports Wi-Fi), use alternative methods:

• 🔌 Ethernet Cable: Some Models (Xiaomi Mi Home Security Camera) 2K Pros have a port RJ-45. Connect the camera directly to the router or switch.
• 📱 Using a mobile hotspot: Turn on the hotspot on your smartphone (network name – no spaces!). Connect the registrar to this network as a regular Wi-Fi. Note: traffic will be consumed from your tariff.
• 💾 Local connection to the memory card: Remove the microSD from the recorder. connect it to the computer through the card reader. View the records through a standard conductor or program. VLC Player.

For car recorders 70mai There is another way – direct connection to the phone through the phone. USB (Only for models with support OTG):

1. Connect the Registrar and Smartphone with a Cable USB Type-C — USB Type-C.
2. Turn on the "File Transfer" mode in the phone settings.
3. The records will be available in the folder DCIM/70mai.

⚠️ Note: When connecting through USB Do not disconnect the recorder from the power - this can damage the files on the memory card.

7 How to improve the stability of Wi-Fi connection

If the registrar connects but the connection is unstable (lags, cliffs, low video quality), follow the following steps:

• 📶 Enhance Wi-Fi signal: Set the router closer to the recorder (maximum distance – 10 meters without obstacles). Use a repeater (signal repeater) or a Mesh system (for example, Xiaomi Mi Wi-Fi Range Extender). Change the Wi-Fi channel in your router settings (select the least loaded, such as 6 or 11).
• ⚡ Optimize your router settings: Disable WPS and Wi-Fi Protected Setup — these can conflict with Xiaomi devices. Enable Qos (Quality of Service) and prioritize your device. MAC-Update the router's firmware to the latest version.
• 🔄 Set up the registrar: in the Mi Home app or 70mai Reduce the broadcast resolution (e.g., with 2K before 1080p). Turn off Cloud Storage if you're not using it. Set a fixed bitrate instead of an automatic one.

For car recorders 70mai recommended:

• Disable automatic firmware update over Wi-Fi (to avoid wasting traffic on the road).
• Use a class memory card U3 (For example, SanDisk Ultra for stable recording.
• In the application settings, enable the option "Record While Driving" (Record While Driving).

💡

For maximum stability, use a router with support for Wi-Fi 6 standard (802.11ax) And it's a 20 MHz channel, which will reduce interference from other devices.

8.Security: How to protect the registrar from hacking

Xiaomi registrars connected to Wi-Fi are vulnerable to hacker attacks.

• 🔒 Change the standard password: In the Mi Home app, go to Device Settings → General. → Set a complex password (at least 12 characters with numbers and special characters).
• 🌐 Turn off Internet access: Close ports 80, 443 and 554 for the LAN in your router settings. Turn off Remote Access in the app if you don't use it.
• 🔄 Update your firmware: Enable automatic updates in your device settings. Manually check for new versions.
• 📵 Restrict physical access: Install the registrar in an out-of-access location. Use a memory card lock (if supported by the model).

If you suspect that your recorder has been hacked (for example, the camera turns on its own or unknown devices appear in the app), immediately:

1. Turn the device off the Wi-Fi.
2. Reset the settings to factory (reset button on the case).
3. Change your password from your Xiaomi account and Wi-Fi network.

💡

For additional protection, use the guest network on the router specifically for smart devices, which will limit the hacker's access to your main network.

FAQ: Frequent questions about connecting Xiaomi registrars