How to connect Bluetooth column to Xiaomi phone: instructions + mistake-making

Connecting a wireless speaker to a Xiaomi smartphone via Bluetooth seems like a simple task — until you encounter errors like “Device not found” or constant communication interruptions, POCO X5 Mi 11 may be cranky when paired with columns JBL, Sony SRS In this article, we'll look at not only the basic instructions, but also the hidden settings. MIUI, This will help stabilize the connection, as well as solve typical problems – from lack of sound to conflict profiles. A2DP.

Feature of Xiaomi phones – modified firmware MIUI, It sometimes blocks the connection of "uncertified" devices or limits their functionality (for example, turns off the microphone in the speaker).+ Smartphones and speakers to find universal solutions. If your speaker has already been paired with another phone, reset it to factory settings before connecting to Xiaomi (usually holding the power button 10).+ This will eliminate 80% of the invisibility problems of the device.

1.Preparation: What to check before connecting

Before you search for a column in the Bluetooth menu, make sure both devices are ready to pair. Let's start with a Xiaomi phone:

• 📱 Update. MIUI: Go to Settings. → The phone. → System updates: Outdated versions (below) MIUI (13) may not support a modern aptX codec, or LDAC, What will cause the sound to be interrupted.
• 🔋 Charging column: Battery levels below 20% often lead to automatic Bluetooth shutdown to save power.Put the speaker on the network for 10-15 minutes.
• 🛡️ Permits for MIUI: B Settings → Annexes → Application management → Bluetooth check that the application has Location and Warehouse rights (needed to caching devices).

Now on the column:

• 🔊 Pair mode: Most speakers activate it with a long press of the power button (3-5 seconds) until the blue/red-blue indicator flashes. JBL Charge 5, for example, has a separate Pairing button for this.
• 🔄 Reset previous connections: If the speaker was previously connected to another phone, it can "ignore" the new gadget. Reset it by holding the power button for 10-15 seconds (before the beep).
• 📡 Distance and interference: First connection at a distance of no more than 1 meter. Make sure there are no working microwaves, 2.4 GHz routers or other sources of interference.

⚠️ Note: If your Xiaomi previously connected to a car radio or headphones, the system could remain “junk” profile HFP (It's in conflict with the profile. A2DP (To clear it, go to Settings. → Bluetooth → ⚙️ (setting) → Clear the cache.

2. Step-by-step instruction: how to connect a column to Xiaomi

Follow this algorithm if you connect a column to Xiaomi for the first time:

1. Open Settings on your phone and select Bluetooth (or swipe down the notification bar and hold the Bluetooth icon).
2. Activate Bluetooth with a slider in the top corner. Wait for the phone to start scanning (it says "Device Search...").
3. Include pairing mode (see section 1) on the column. its name should appear in the list of available devices (for example, JBL Flip 6 or Mi Portable Speaker).
4. Click on the speaker name in the list. If necessary, confirm pairing on both devices (sometimes you need to type in). PIN-code: Standard 0000 or 1234).
5. Wait for the "Connected" message under the speaker name. Now you can play the sound.

If the column does not appear in the list:

Make sure the column is in pairing mode (blue light flashes)

Reboot Bluetooth on your phone (turn off/on)

Check if Invisible is enabled in Xiaomi’s Bluetooth settings

Shut down. VPN (It can block local connections)

Try connecting from another phone (to diagnose the column)-->

On some Xiaomi models (e.g. Redmi) 10C) There's a bug: once you're connected, the speaker shuts down immediately:

1. Go to Settings. → Bluetooth → ⚙️ (setting) → Additionally.
2. Turn off the option of Automatic Bluetooth Shutdown.
3. Enable the Sound Quality Priority (if there is one).

3. Sound tuning: how to improve the quality of playback

Even after a successful connection, the sound can wheez, interrupt, or sound quiet. This is due to Bluetooth codec settings and optimization. MIUI. Here's how to fix it:

To unlock hidden codec settings:

1. Activate Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
2. Back to Settings → Additionally. → For developers.
3. Find the items: Turn on Bluetooth A2DP Hardware Offload — turn off (reduce lags). Absolute volume Bluetooth — turn on (increase maximum volume). Bluetooth codec — select LDAC (for quality; or SBC (stability).

⚠️ Attention: On some firmware MIUI 14+ Absolute volume can cause distortions at maximum volume, so if you hear wheezing, reduce the volume on your phone to 80% and adjust it with the buttons on the speaker.

💡

If the column supports aptX Adaptive (e.g. Sony) WH-1000XM4), but it is not in the list of codecs - update the column firmware through the official manufacturer's application.

4. Typical errors and their solutions

Let’s analyze the most common problems when connecting speakers to Xiaomi and how to fix them.

The phone can't see the column.

Causes and solutions:

• 🔍 Column not in pairing mode: Hold the power button/Bluetooth column 5–10 seconds until the indicator flashes.
• 📵 Bluetooth disabled at system level: Check if In-plane or Energy Saving mode is activated (they block Bluetooth).
• 🚫 Column in the blacklist: Go to Bluetooth Settings → Device history, find the column and click "Forget." Then reconnect.
• 🔄 Conflict with other devices: Disable all other Bluetooth devices (earphones, smartwatches) and try to connect the speaker again.

4.2. The column is connected, but no sound.

Check the following:

• 🔈 Volume on phone and column: On MIUI There are separate regulators - swipe down the notification panel and check the Media slider.
• 🎵 Sound output to the column: While playing music swipe down and hold the volume icon – select the column in the list of output devices.
• 🔌 Connection Profile: The column must be connected as A2DP (for music, not HSP (Reconnect the device.
• 🛠️ Resetting sound settings: Go to Settings → Sound. → Additionally. → Resetting the sound settings.

Permanent communication interruptions

If the column is turned off after 5-10 minutes:

• 📶 Weak signal: Reduce the distance to 3-5 meters, remove obstacles (walls, furniture).
• 🔋 Energy saving: In Settings → Battery. → Power saving mode add Bluetooth to exceptions.
• 🔄 Wi-Fi conflict: If phone and speaker are on the same 2.4GHz frequency, switch Wi-Fi to 5GHz.
• 📱 bug MIUI: Update your firmware or reset your network settings (Settings) → System system → Reset → Resetting network settings).

5. Features of connecting the Xiaomi Mi Portable speakers

Xiaomi brand speakers (e.g. Mi Portable Speaker, Mi Bluetooth Speaker) 16W) They have unique features when connecting to phones of the same brand:

• 🔗 Fast pairing: If the speaker and phone are tied to the same Mi Account, they will connect automatically when Bluetooth is turned on for the first time.
• 🎛️ Advanced Settings: In the Mi Home app (if the column supports Mi Smart Speaker), you can configure the equalizer, shutdown timer and even the Xiao voice assistant AI.
• 🔋 Battery savings: Xiaomi speakers automatically go into low power mode if Xiaomi phone is discharged below 15%.
• 🔊 Stereopara: Two Mi Portable speakers can be linked to a stereo system via Bluetooth Settings → Additionally. → Stereo couple.

To activate the stereo mode:

1. Connect the first column to the phone.
2. Turn on the second column and hold the Bluetooth button for 3 seconds (until the orange light flashes).
3. On the phone in the list of Bluetooth devices will appear the option to Create a stereo pair – click it.

⚠️ Note: Stereo mode only works between speakers of the same model (for example, two Mi Portable Speaker). 16W). If the models are different, the sound will be duplicated rather than split into left/right channels.

💡

Xiaomi speakers with Mi Smart Speaker support (e.g. Mi) AI Speaker) may conflict with other Bluetooth devices. Before connecting, disable all other gadgets in Settings → Bluetooth.

6.How to connect a column to Xiaomi through the manufacturer’s apps

Some columns (especially from the JBL, Sony or Bose require proprietary apps to work properly. Here's how to use them with Xiaomi:

Instructions for connecting through the application:

1. Download the official app from Google Play (avoid clones!).
2. Connect the speaker to your phone via Bluetooth (as described in Section 2).
3. Open the app, it should automatically detect the column. If not, click Add Device and follow the instructions.
4. Update the column firmware (if available) – this will fix the connection bugs.

Example JBL Charge 5:

• In the annex JBL Portable Go to Settings → PartyBoost.
• Activate the mode and connect the second column JBL — They're synchronized for enhanced sound.
• In the Equalizer section, select the Bass Boost preset for deep low frequencies.

7. Alternative ways to connect (if Bluetooth does not work)

If Bluetooth on Xiaomi refuses to work, try these methods:

Connection through AUX-cable (3.5 mm)

Most speakers have a 3.5 mm wire connector. You'll need:

• 🎧 Cable AUX (3.5 mm - 3.5 mm).
• 📱 Transitioner USB-C → 3.5mm (if your Xiaomi doesn’t have an audio jack like the Mi 11 or the other two). POCO F4).

Connect one end of the cable to the phone, the other to the speaker. In the notification panel, select the output to Wired headphones.

7.2 Connection through NFC (if maintained)

Some speakers (e.g. Sony) SRS-XB43) Xiaomi phones (starting with Mi 10) support NFC:

1. Turn it on. NFC on the phone (Settings) → Connection and sharing → NFC).
2. Put the phone on the tag. NFC on the column (usually marked with a logo).
3. Confirm the connection on the phone screen.

7.3 Use of the phone as a Bluetooth transmitter

If the speaker connects to the phone but not to another device (e.g., Smart) TV), You can use Xiaomi as an intermediary:

1. Connect the speaker to your phone via Bluetooth.
2. On the TV, turn on the search for Bluetooth devices.
3. On the phone in Bluetooth Settings → ⚙️ → Select the speaker as the source of sound for TV.

💡

If you have a speaker with Bluetooth 5.0 support+, But the phone doesn't see it, so try rolling back the Bluetooth stack. → Additionally. → For developers, turn off. AVRCP 1.6 (if available).

8. Frequent questions and answers