How to connect the video recorder Xiaomi to the phone: 3 working ways + mistake-making

Xiaomi video recorders (including models) 70Mai, Mi Home Security Camera and Xiaomi Auto Cam offer not only traffic recording, but also smart features like online broadcasting, traffic notifications and voice control. However, many users face difficulties when first connecting the device to the smartphone – the registrar is not on the network, the application gives an error, or the video slows down. In this article, we will analyze all the current synchronization methods (over Wi-Fi, Bluetooth and through the cloud), as well as typical problems and their solutions.

Important: the instructions below are suitable for Android and iOS, but there are nuances: for example, on the iPhone, you may need additional permission to access the local network, and on some Xiaomi models (for example, on the iPhone, you may need additional permission to access the local network, 70Mai Pro) first, we need to update the registrar firmware, and we took all these points into account and put together a universal algorithm that works even with budget registrars for 2020-2023.

1.Preparation: What to do before connecting

Before syncing the DVR with your smartphone, follow a few mandatory steps that will eliminate 80% of the typical errors like "device not found" or "no connection".

Step 1. Check model compatibility. Not all Xiaomi registrars work with the official Mi Home app, 70Mai Midrive D08 requires proprietary software 70Mai, Xiaomi Auto Cam 1080p — Xiaomi Home Security.Clarify the model on the device body or in the documentation.

Download the official app for your model|Charge the registrar to at least 50%|Connect the registrar to power (not all models run on a battery)|Turn on Wi-Fi and Bluetooth on your smartphone|Make sure that the phone is free 1-2 GB of memory (for cache video)-->

Step 2: Update the registrar firmware. Outdated software often causes failures.

1. Turn on the registrar and wait for the load.
2. Go to Settings. → Device information.
3. Compare the version with the latest one on Xiaomi’s official website.

Step 3. Set up your smartphone:

• 📱 Android: Allow the app to access geodata, camera and microphone (needed for voice control).
• 🍎 iOS: Enable Local Network in the App Settings (Settings) → Confidentiality → Local area network).
• 🔒 Turn it off. VPN Firewalls – they can block the connection to the registrar.

⚠️ Note: If you use a registrar with dual-band Wi-Fi support (2.4/5 Hz, when you first connect, select only 2.4 Hz. Network. 5 Hz many Xiaomi models are not supported at the stage of setting.

Method 1: Connecting via Wi-Fi (main method)

This is the most reliable way, and it works for 90% of Xiaomi models. 70Mai, Mi Home and other lines, but the names of menu items may differ.

Step 1: Activate the access point on the registrar:

1. Turn on the registrar and wait for the main screen to appear.
2. Press the Wi-Fi button (usually signed or marked with an antenna icon).
3. Hold it for 3-5 seconds until the indicator flashes blue (meaning the setting mode is turned on).

Step 2. Connect your smartphone to the registrar network:

1. Open the Wi-Fi settings on your phone.
2. Find a network with a species name Xiaomi_Cam_XXXX or 70Mai_XXXX.
3. The password is usually not required or is specified in the instructions (standard - 12345678).

Step 3. Complete the setting in the app:

1. Open the app (Mi Home, 70Mai or).
2. Click Add Add the device (+) → Choose the category Cameras or Autos.
3. Follow the instructions on the screen. The app will automatically determine the model and prompt you to enter your home Wi-Fi data.

💡

If the registrar is not in the app, try restarting it by holding the power button for 10 seconds, and check if the antivirus (such as Avast or Kaspersky) blocks access to the local network.

Method 2: Connect via Bluetooth (for new models)

Some Xiaomi registrars (e.g, 70Mai Pro 2 or Xiaomi Auto Cam 2K) Supports fast Bluetooth Low Energy connection (BLE). This method is more convenient than Wi-Fi, as it does not require reconnecting the network on the phone.

Step 1. Turn on Bluetooth on the registrar:

• Press the Bluetooth button (usually marked with an icon) 🔵) 3 seconds.
• The indicator should flash green - this means that the device is ready to pair.

Step 2. Find the device in the app:

1. Open the app and select Add the device → Bluetooth.
2. Find your registrar in the list (the name will contain the model, for example). 70Mai-Pro-XXXX).
3. Confirm the pairing on the phone and registrar (may need to enter) PIN-code, usually 0000 or 1234).

Step 3: Set up Wi-Fi via Bluetooth:

After pairing, the app will suggest connecting the registrar to your home Wi-Fi network. Enter the router password - the data will be transmitted over Bluetooth, and the device will automatically go online.

⚠️ Warning: If the video in the app is slowed or interrupted after connecting via Bluetooth, check the distance between the devices. BLE — 10 meters. Also close the background apps on your smartphone (especially instant messengers and games) that can cause interference.

Wi-Fi.|Bluetooth.|Through the cloud (remotely)|I'm not hooking up to the phone.-->

4. Method 3: Remote Connection via Xiaomi Cloud

If you need to access the registrar from anywhere in the world (for example, check the record from the parking lot), use a cloud connection.

Step 1. Link the registrar to your Xiaomi account:

1. Open the Mi Home app (or analogue for your model).
2. Go to profile. → Account management → Add the device.
3. Select your registrar from the list and confirm the binding.

Step 2: Set up cloud storage:

• 📁 Free rate: 7 days of record storage (permission up to) 720p).
• 💰 Paid fare: from 99 ₽/month 1080p 30 days of storage.

To activate the cloud, go to Device Settings → Cloud storage and choose the right plan.

Step 3. View the recordings remotely:

Open the app, select your registrar, and go to the Records tab, where you'll find:

• 🎥 Manual records (hand-held during the trip).
• ⚠️ Events (automatic recordings in an accident or impacts).
• 🔄 Cyclical records (permanent recording with rewriting).

5. Typical errors and their solutions

Even with the right setup, there can be failures. TOP-5 errors and ways of correcting them.

Error 1: "Device not found" in the app

• 🔄 Restart the registrar (hold the power button for 10 seconds).
• 📶 Check that the smartphone is connected to the network of the registrar (Xiaomi_Cam_XXXX).
• 🔧 Update the Registrar’s App and Firmware.

Error 2: "Incorrect Wi-Fi Password"

• 🔐 Make sure you enter a password from the main network, not from the registrar’s access point.
• 🌐 Check that the router is running in 2.4Hz mode (many registrars do not support 5Hz).
• 📵 Turn off the router function Hide SSID — Some Xiaomi models don’t see hidden networks.

Error 3: Videos are slowing down or interrupting

• 📶 Check the Internet speed (minimum 5 Mbps for the 1080p).
• 🔌 Connect the recorder to charging - with a low battery charge, performance may decrease.
• 📱 Close background apps on your smartphone (especially YouTube, TikTok, or games).

Error 4: The application gives a server error

• 🌍 Check if the antivirus does not block access to Xiaomi servers (add the application to exceptions).
• 🕒 Try connecting later – sometimes Mi Home servers are overloaded (especially in the evening).
• 📋 Make sure the date and time on your smartphone are set automatically.

Error 5: Registrar does not save settings after rebooting

• 🔋 Check the battery – at a discharge below 20%, the device can reset settings.
• 💾 Make reset to factory settings (Settings) → Reset) and reset.
• 🔄 Update your firmware via Mi Home or official website.

💡

If neither of these methods worked, try connecting the registrar to another smartphone (such as friends or relatives) to help determine if the problem is in the device or in your phone.

6. Additional settings after connection

After successful synchronization, set up the registrar for maximum convenience:

Configuring notifications:

• 🚨 Enable traffic accident, impact and traffic alerts in the Settings menu → Notifications.
• 🔔 Select the notification method: push (in the application) or SMS (requires a phone number link).

Automatic recording:

• 🎬 Enable Cyclical Recording (overwrite old files when memory is scarce).
• 📹 Set the segment lengths to 1 min, 3 min or 5 min.

3. Voice control (available for 70Mai Pro and Xiaomi Auto Cam 2K):

• 🎤 Activate the function in Settings → Voice assistant.
• 🗣️ Supported commands: "Start recording", "Take photo", "Enable parking mode".

Parking conditions:

If your registrar supports parking (for example, 70Mai Omni, include it in the Settings menu → Parking mode: The device will record video when motion is detected even when the car is silenced (power connection is required via a power supply link). ACC permanent plus).

7. How to view and save phone records

Records from the registrar can not only be viewed in real time, but also saved to the smartphone for further use (for example, for an insurance company).

Method 1: Real-time viewing:

1. Open the app and select your registrar.
2. Click on the View in real time.
3. Use gestures to control the camera: 👆 Swipe up/down for scaling. 👉 Swipe left/right to turn the camera (if supported).

Method 2: Keeping records on the phone:

1. Go to the Records tab.
2. Select the desired file and click Download (icon) ⬇️).
3. The video will be saved in the folder. Download/Xiaomi_Cam (for Android) or Files → Mi Home (for iOS).

Method 3: Export through a memory card:

If the registrar supports MicroSD:

1. Remove the memory card from the registrar.
2. Connect her to the phone through an adapter.
3. Copy files from the folder DCIM/Record.

⚠️ Warning: When removing a memory card, always turn off the recorder to avoid damaging files. Also, do not format the card on your phone, which can make it unreadable for the registrar.

Xiaomi Models Comparison: Which Is Best for Connecting to a Phone

If you haven’t bought a registrar yet, note the key differences in smartphone compatibility:

For maximum convenience, choose models with Bluetooth (for example, 70Mai Pro 2 or Omni – they connect faster and support voice control. If you need cloud storage, look for Xiaomi Auto Cam or 70Mai Pro.

💡

It's a budget option. 70Mai Midrive D08, But keep in mind that it doesn't have Bluetooth and the cloud is limited to 7 days. 70Mai Omni – despite the high price, it justifies itself due to stable operation and additional options.

FAQ: Frequent questions about connecting Xiaomi DVRs