How to connect Wi-Fi on a Xiaomi TV

Modern Smart TVs from Chinese giant Xiaomi are powerful multimedia centers, the functionality of which depends on the quality of the connection to the global network. Without access to the Internet, you are deprived of the ability to watch online cinemas, use voice search or update system software. The process of setting up a wireless connection in the interfaces of Android TV and PatchWall’s own shell is almost identical and takes only a few minutes with a stable signal.

However, users often face a situation where the TV simply does not see the home network or refuses to connect to it, issuing errors, this can be due to software failures of the router, or with incorrect settings of the region or the Internet. DNS-In this article, we will discuss in detail the standard algorithm of actions, and also consider complex cases that require manual intervention in network parameters.

Before you start setting up, make sure your router is working and is giving out a signal. For 5GHz TVs, this frequency is preferable, as it provides higher data rates, which is critical for watching video at 4K resolution. If the router is far from the screen, you may have to limit yourself to the 2.4GHz band, which is better at breaking walls but has lower bandwidth.

Preparation of equipment and check of the router

The first step is to visually assess the situation and check the basic parameters of your home Internet. Make sure that the indicators on the router flash in normal mode, and other devices (smartphones, tablets) easily connect to Wi-Fi. If the Internet is not everywhere, the problem lies with the provider or in the router itself, and setting up the TV here will not help.

It’s important to know your router’s model and the security standards it supports. Xiaomi’s current TVs work best with encryption protocol. WPA2-PSK or WPA3. If you have an old router with encryption installed WEP Or open network, the device may refuse to connect for security reasons, and it's also worth checking if the router is not on filtering. MAC-Addresses that can block new devices.

For optimal operation of Smart TV It is recommended that the distance between the router and the TV should not exceed 10-15 Direct visibility significantly improves signal quality, especially in the range 5 GHz, which fades when passing through obstacles. If the signal is weak, consider using a Wi-Fi repeater or switching to a wired connection through an obstacle. LAN-cable.

💡

Place your router as high as possible and away from microwave ovens or baby monitors, as they create severe interference in the 2.4 GHz range, which can cause connection breaks while watching movies.

Step-by-step connection instruction through system settings

The main method of activating the wireless network is hidden in the system menu of the device. Regardless of the version of the shell, the path to settings always begins with the home page or the settings button on the remote, you need to find the section responsible for network connections, which usually has the corresponding icon or name.

Then you should select your home network from the list of available ones. If the list is empty, check if the Wi-Fi module is software-enabled. After selecting the network, the system will request a password. Enter it carefully, observing the letter register, because password errors are the most common cause of failure.

After successful authorization, the TV will automatically receive IP-address and settings DNS The top right corner of the screen should show a Wi-Fi icon that confirms the active connection, now you can run applications and check online services, if the icon appeared, but the Internet is not working, you will need to manually adjust the settings.

💡

Automatic receipt IP-address (DHCP) It works 95% of the time, but if a router crashes, you may need to manually register a static address.

Static adjustment IP-addresses DNS

In situations where automatic connection does not work or the connection is unstable, experts recommend to prescribe static settings, this allows you to eliminate addressing conflicts in the local network and bypass some of the limitations of providers.

In the menu that opens, change the type IP s «DHCP» You will need to enter the gateway address (usually the router address, for example, 192.168.0.1 or 192.168.1.1), the subnet mask and the DNS-servers, use of public DNS Google (8.8.8.8) or Cloudflare (1.1.1.1) often solves the problem of long loading of content.

Enter data carefully using the virtual keyboard on the screen. Incorrectly entered gateway will cause the TV to not be released to the global network, although the local connection will be displayed as active. Once you save the settings, the device will reconnect to the network with new parameters.

Below is a table with approximate values for a standard home network:

Use of Wi-Fi Direct and Mobile Internet

Wi-Fi Direct allows you to connect your TV to your smartphone without the need for a router, which is useful if your home Internet is temporarily down and you need to immediately display a photo or video from your phone to the big screen, in which case the TV creates an access point to which the mobile device connects.

To activate this feature, go to the network settings and select Wi-Fi Direct. The network name and password will appear on the screen. Connect your smartphone to this network through the standard Wi-Fi menu. After pairing, you can use screen broadcasting apps such as Mi Remote or Chromecast built-in tools.

It's worth noting that in Wi-Fi Direct, the TV has no Internet connection unless your smartphone is sending mobile traffic through that connection, and the data rate in this mode can be lower than when you connect via a router, which will affect the quality of the streaming, and use this method primarily to show local content.

⚠️ Note: When you are actively connected via Wi-Fi Direct, the function of accessing the global network through the built-in module may not be available, since the antenna is occupied by a direct communication channel with the phone.

The alternative is to distribute Wi-Fi from your smartphone. Most modern Android smartphones and iPhones allow you to create an access point. Connect your TV to this network as if it were a normal home network. However, be aware of the expense of mobile traffic, especially if you plan to watch high-resolution video.

Solving common problems and errors

One of the common problems is when the TV sees the network but does not connect to it, giving an error “Password Check” or “Getting a password” IP-First of all, try to forget the network in the TV settings and reconnect it by carefully rechecking the password. Often the problem lies in unnecessary spaces or an incorrect character register.

If the error persists, the router may be full of pool DHCP-Try rebooting your router by turning it off for 30 seconds, and changing the Wi-Fi channel in your router settings helps, especially if you have a lot of neighborhood networks that create interference.

In rare cases, the problem may be in the date and time: If the TV has a time settings down, the security certificates may not work, which blocks the connection, go to the date and time settings and enable automatic synchronization over the network (if there is a wired connection) or set the time manually.

• 🔄 Reboot the router and TV completely by pulling the cords out of the socket.
• 📡 Take your laptop or phone closer to the TV to check the signal level at that point.
• ⚙️ Reset the network settings on the TV to factory values in the corresponding menu.
• 🔌 Try to connect your smartphone through USB-modem if the TV's built-in Wi-Fi module is faulty.

⚠️ Note: If the TV stopped seeing any Wi-Fi networks after the firmware update, the update may have been flawed).

Diagnostics through the Engineering Menu and ADB

For advanced users, there is an ADB (Android Debug Bridge) diagnostic tool, and by connecting to a TV from a computer, you can log the system and see where the connection ends. The adb shell netcfg command will show the status of all network interfaces.

In the engineering menu, the entrance to which is carried out by a combination of buttons on the remote (often this combination of "Back» + «Menu, or type 1969 code into the search box, you can see technical information about the Wi-Fi module. MAC-address, signal strength in dBm and driver version.

adb shell dumpsys wifi | grep"Supplicant state"

This command in the ADB console will show the current status of the connection to the access point. COMPLETED status means a successful connection, while SCANNING or DISCONNECTED will indicate a problem. Use of such tools requires caution, since improper changes in system files can lead to the failure of the module.

💡

Signal strength below -75 dBm is considered unstable for streaming 4K video; in this case, you need to improve the Wi-Fi coverage in the room.

FAQ: Frequently Asked Questions

⚠️ Warning: Do not install third-party Wi-Fi applications from unknown sources, they cannot physically amplify the antenna signal and often contain malicious code.