How to Connect and Configure Wi-Fi on Xiaomi Mi 10: A Complete Guide to Problem Solutions

Xiaomi Mi 10 is the flagship of 2020, which still remains relevant thanks to powerful hardware and regular updates MIUI. However, even such an advanced device can have problems connecting to Wi-Fi, from simple password errors to system failures. This article will help you understand how to properly connect Wi-Fi on Xiaomi 10, set up a network for maximum speed and fix typical problems.

We will look not only at the standard way to connect via the settings menu, but also at alternative methods (for example, by using the Settings menu). QR-code WPS), And we'll also figure out what to do if your smartphone doesn't see the network, it's constantly disconnecting from it, or it's giving you an authentication error. MIUI, which allow you to optimize the operation of the Wi-Fi module and save battery power without losing the stability of the connection.

If you have just purchased the Mi 10 or have problems after updating your firmware, this guide will be your guide to setting up your wireless network.

1. Standard Wi-Fi connection on Xiaomi Mi 10

So let's start with the basic method, which works 90 percent of the time, and to connect to a wireless network, do the following:

1. Open “Settings” – the gear icon on the home screen or in the application menu.
2. Go to the Wi-Fi section (usually at the top of the list).
3. Activate the Wi-Fi slider if it is turned off.
4. In the list of available networks, select your own and enter your password (make sure the register of characters matches!).
5. Press Connect.

If it's a success, it'll be next to the name of the network, and next to the status bar, it'll be a Wi-Fi icon.

• 🔍 If the network is not displayed in the list, check if it is turned on on the router and if it is not hidden. SSID.
• 🔒 If the error “failed to connect” try to restart the router and smartphone.
• 📶 If the signal is weak (1-2 dividing, get closer to the source or check the router settings.

💡

If you connect to a public network (such as a cafe or airport), a browser requiring authorization may open after entering your password, in which case just follow the instructions on the screen.

The Xiaomi Mi 10 also has an automatic connection to known networks. If you have previously logged in to the same network on another Xiaomi device (linked to the same Mi Account), the smartphone can connect to it without entering a password thanks to cloud synchronization.

2. Alternative ways to connect to Wi-Fi

Sometimes the standard method doesn't work or it's just inconvenient. Let's look at three alternatives:

2.1 Connection through QR-code

This is a convenient way to do this if you don't want to manually enter a long password.

1. On another device (for example, a laptop or tablet) already connected to the desired network, generate QR-This can be done through special applications or even in the settings of some routers.
2. On Mi 10, open Settings → Wi-Fi.
3. Slap the icon. QR-code (located in upper right corner).
4. Put the camera on QR-code – the smartphone will automatically connect to the network.

This method works in the opposite direction: you can share your network by generating a new network. QR-code directly to Xiaomi Mi 10 (same Wi-Fi menu).

2.2 Use. WPS (Wi-Fi Protected Setup)

WPS It allows you to connect to a router without entering a password by pressing just one button on the router:

1. Make sure your router supports WPS (Usually there is a button with the corresponding inscription).
2. On Mi 10 go to Settings → Wi-Fi → Additionally. → WPS.
3. Click Connect via WPS.
4. For 2 minutes, press the WPS button on the router.

⚠️ Attention: Function WPS It's considered unsafe because it's vulnerable to brute force attacks. WPS router-setting.

Connect via Mi Share (Mi Drop)

If you have another Xiaomi device connected to the right network, you can “pass” your Wi-Fi settings using the proprietary Mi Share (formerly Mi Drop) feature.

1. On both devices, turn on Wi-Fi and Bluetooth.
2. On the original device, open Settings. → Connections and sharing → Mi Share.
3. Select Send and specify Xiaomi Mi 10 in the list of available devices.
4. Confirm receipt on Mi 10 – Wi-Fi settings will be automatically moved.

3. Set up Wi-Fi settings for stable operation

Even after a successful connection, the connection may not work as smoothly as it breaks, brakes, or consumes too much power. To optimize Wi-Fi performance on the Xiaomi Mi 10, go to Settings. → Wi-Fi, tap your network name and pay attention to the following parameters:

• 📡 Network Range: If your router supports 5GHz, choose it for higher speed (but shorter range).For more stability in remote rooms, use 2.4GHz.
• 🔄 Auto Connection: Turn on this option if you want your smartphone to automatically connect to the network when it is detected.
• 📊 Speed Measurement: The function allows you to check the real speed of the connection directly in the settings.
• 🔋 Traffic savings: Limits background data consumption, but may affect the performance of some applications.

For power users, hidden settings are available that can be enabled through the engineering menu, for example, to force the Wi-Fi 6 standard (if your router supports it), do:

Enter the dialer in ##4636##


Go to the section "Information about Wi-Fi"




Select "Wi-Fi Settings" and set "Wi-Fi standard" on 802.11ax

⚠️ Note: Incorrect settings in the engineering menu can lead to unstable operation of the Wi-Fi module. If not sure, leave the default settings.

4. Solving typical Wi-Fi issues on Xiaomi Mi 10

If your smartphone is not connecting to the network or the connection is not working properly, try the following steps:

4.1 The network is not found or displayed in the list

• 🔌 Restart the router (pull the plug out of the socket for 30 seconds).
• 📱 Reboot the Xiaomi Mi 10.
• 🔍 Check if it's hidden. SSID networking.
• 🛠️ Update the firmware of the smartphone: Settings → The phone. → Updating the system.

4.2. Authentication error or "Unable to connect"

This problem often arises from an incorrect password or security settings conflict.

• 🔑 Make sure the password is entered correctly (check the register and special characters).
• 🔄 Change the type of network security in the router with WPA3 on WPA2-PSK (Mi 10 is in conflict with the new standard).
• 📋 Forget the network on your smartphone and connect again: Settings → Wi-Fi → [tap on the net] → Delete.
• 🔧 Reset network settings: Settings → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.

Permanent breaks of connection

If Wi-Fi is periodically turned off, it may be the fault of:

• ⚡ Battery Savings: Turn off power saving mode for Wi-Fi in Settings → Battery. → Energy saving applications.
• 📡 Channel congestion: Change the Wi-Fi channel in the router settings (for example, from automatic to fixed 6 or 11 for 2.4 GHz).
• 🔄 Conflict IP: Set up static. IP for Mi 10 on the router or turn on DHCP.
• 🛠️ Firmware problems: Install the latest version MIUI Or roll back to a stable build if you use the beta version.

Check the distance to the router

Turn off the power saving mode for Wi-Fi

Switch to another range (2.4/5 GHz)

Update router firmware

Reset network settings on your smartphone

-->

5. Optimizing the speed and stability of Wi-Fi

To maximize wireless network performance on the Xiaomi Mi 10, take advantage of these tips:

Selecting the right range

2.4 GHz is suitable for:

• 🏠 Large rooms (better through walls).
• 📱 Older devices that do not support 5 GHz.
• 💰 Energy savings (less battery consumption).

5 GHz is preferred for:

• 🎮 Online gaming and streaming 4K-video.
• 🖥️ Work near the router (up to 10 meters).
• 🚀 Maximum speed (up to 1 Gbps on Mi 10).

On the Xiaomi Mi 10, you can enable automatic switching between bands (if the router supports one network on both frequencies).

1. Go to Settings. → Wi-Fi.
2. Tap the name of your network.
3. Enable the Auto-Switch option (if available).

Customization DNS speed up the Internet

The default Mi 10 uses is DNS-Provider, but you can specify faster servers (e.g. Google or Cloudflare):

1. Go to Settings. → Wi-Fi.
2. Tap on the current network and select Change the network.
3. Deploy additional settings.
4. In the field DNS Type 1.1.1.1 (Cloudflare) or 8.8.8.8 (Google)
5. Save the changes.

Check the speed before and after the change DNS Use the Speedtest app or built-in test in your Wi-Fi settings.

Deactivation of background applications

Many programs (especially social networks and instant messengers) consume traffic in the background, which can slow down the main connection.

1. Go to Settings → Applications → Application Management.
2. Select an app (such as Facebook or TikTok).
3. Turn off Autostart and Background data options.

💡

Use of static IP-Addresses for Xiaomi Mi 10 on the local network can significantly improve connection stability, especially if you have many connected devices.

6. Network settings reset and extreme measures

If all the previous methods didn't work, you'll have to go for more radical solutions. Start by resetting your network settings.

1. Open Settings → System → Resetting settings.
2. Select Reset Wi-Fi, Mobile Network and Bluetooth settings.
3. Confirm the action (password or pattern lock may be required).
4. After rebooting, try to connect to the network again.

If the problem persists, it may be the firmware's fault.

• 🔄 Update to the latest version MIUI through settings → The phone. → Updating the system.
• 🔙 Reverse to stable version if you use beta firmware.
• 🛠️ Install custom recovery (for example, TWRP) and run a clean version MIUI (Only for experienced users!).

⚠️ Note: Xiaomi Mi 10 with global firmware (EEA) There may be a conflict with some routers due to regional restrictions on Wi-Fi frequencies, in which case the firmware version for Russia or China will help.

If neither of these methods worked, there are two options:

1. Contact Xiaomi Service Center for Wi-Fi Diagnostics (Antenna or Chip Replacement may be required).
2. Use a USB-ethernet adapter (via the OTG) temporary.

Frequently Asked Questions (FAQ)