How to connect Xiaomi TV to the Internet: Wi-Fi, cable, network setting

Xiaomi TVs (Mi series) TV, Redmi TV, Xiaomi TV A) require an internet connection to work properly: streaming video in 4K, Google Play, firmware updates and Mi Home management. Without the network, many features are not available, from YouTube to voice assistant. MIUI TV type of network.

In this article, we will discuss all the current ways to connect Xiaomi TVs to the Internet: via Wi-Fi (including 5 GHz and 6 GHz), Ethernet cable, as well as solutions for complex cases - for example, if the TV does not see the network or constantly loses connection.

If you encounter errors such as “I failed to connect to the network” or "IP-No address received, at the end of the article, there's a section on diagnostics and step-by-step solutions, and for owners of older models (e.g. Mi). TV 4A 2018) we have prepared separate recommendations for updating the firmware to improve compatibility with modern networks.

1. Preparing Xiaomi TV to Connect

Before setting up your network, make sure your Xiaomi TV is ready to connect, which will eliminate most of the errors in the configuration phase.

First, check the firmware version. Outdated software may not support current Wi-Fi 6 standards or WPA3. To find out the version:

1. Open the settings (cog in the upper right corner).
2. Go to About TV. → Version. MIUI TV.
3. Compare this with the latest updates on Xiaomi’s official website.

Second, prepare the data for the connection:

• 📶 Name of the network (SSID) Password (if Wi-Fi).
• 🔌 Ethernet cable (if you plan to connect wired).
• 📱 Smartphone with mobile Internet (in case of setting up through the access point).

Verified version. MIUI TV|Data from Wi-Fi/router|TV's on the network. 220V|The router is within radius. 5 meters (for Wi-Fi)|Disabled. VPN/router proxy-->

If the TV has previously connected to another network, reset your network settings: → Network and Internet → Reset the network settings. DHCP and avoid conflict IP-address.

⚠️ Attention: On Mi models TV 4S and older after resetting the network may require re-authorization in Google Play.

2. Connection via Wi-Fi: step-by-step instructions

Most users choose wireless connectivity because of convenience. Let's take a look at the Xiaomi experience. TV A2 43" (relevant for all models on MIUI TV 3.0+).

Step 1. Open the Settings. → Network and Internet → Wi-Fi. Activate the Wi-Fi switch (if it's off). The TV will start scanning the available networks.

Step 2. Find your network on the list. If it's not there,

• 🔄 Restart the router (turn off power for 30 seconds).
• 📡 Check if the broadcast is on. SSID router-setting.
• 🔍 Try manually adding the network by clicking Add Network and entering SSID.

Step 3. Select a network and enter a password. If the password contains special characters (e.g.!, #), use the on-screen keyboard of the TV. On models with a Xiaomi Bluetooth Remote, you can connect the keyboard over Bluetooth for convenience.

Step 4: Once connected, the TV will receive IP-Address (usually takes 10–30 seconds) If an error occurs IP-Addresses, go to the problem solving section.

💡

If the TV is connected to a 5GHz network but the speed is low, try manually specifying the 36-48 or 149-165 channel in the router settings - they are less loaded.

3. Wired connection (Ethernet): when and how to use

Cable connection provides maximum stability and speed, which is critical for the development of the system. 4K HDR-Google Stadia, but not all Xiaomi models have an Ethernet port:

To connect:

1. Connect the TV to the router with a Cat 5e cable or higher (up to 100 meters long).
2. In the TV menu, select Settings → Network and Internet → Wired network.
3. Wait for automatic receipt IP and DNS.

If the network is not defined:

• 🔌 Check the cable for physical damage.
• 🖥️ Restart router and TV.
• 🔧 In the router settings, turn on IGMP Snooping (for multicast broadcasts).

⚠️ Note: On models without an Ethernet port (e.g. Mi) TV 4A) You can use a USB-Ethernet adapter (chip support is available). AX88179 or RTL8153). However, the speed will be limited to 100 Mbit / s.

4. Alternative ways of connecting to the Internet

If Wi-Fi and cable are not available, consider these options:

4.1. Mobile Internet through USB-modem

Some Xiaomi TVs (starting with the MIUI TV 2.5) support the connection USB-modem (e.g. from Megafon) M150-2 Huawei E3372). For that:

1. Insert the modem in USB-television-port.
2. Go to Settings. → Network and Internet → USB-modem.
3. Select the operator and wait for the connection.

On models with port. USB 2.0 speed is limited to 30-50 Mbps, which is not enough for 4K-streams, but enough for SD-content.

4.2. Smartphone access point

If there is no router, you can distribute the Internet from your phone:

• 📱 On Android: Settings → Access Point and modem → Wi-Fi hotspot.
• 🍎 On iPhone: Settings → Modem mode.
• 🔗 On the TV, connect to the network as if it were a normal Wi-Fi.

Limitations:

• ⚠️ Speed depends on the mobile operator tariff.
• ⏳ Autonomy: The phone discharges quickly.
• 📶 Possible lags when watching video due to unstable signal.

4.3. Powerline adapters (for wired Internet without cable)

If you can’t throw an Ethernet cable, use Powerline adapters (e.g. TP-Link). AV1000). They're wiring the Internet:

1. Connect one adapter to the router via Ethernet.
2. The second adapter is inserted into the socket next to the TV and connect them with a cable.
3. On the TV, select the Wired Network.

The speed depends on the quality of the wiring, but usually is 200-500 Mbit / s.

5. Network Optimization for Xiaomi TV

Even after a successful connection, you may experience lags when watching videos or slow downloading applications, which is due to the settings of the router or TV.

5.1. router settings for stable connection

Recommended parameters for the router (on the example of Xiaomi Router) 4A):

• 🔒 Type of security: WPA2-PSK (or WPA3, if maintained).
• 📶 Wi-Fi Channel: Auto or manually select the least loaded (e.g., channel 11 for 2.4 GHz).
• 🔄 Channel width: 20/40 MHz for 2.4 GHz, 80 MHz for 5 GHz.
• 📡 MoCA: Disconnect if you are not using coaxial networks.

5.2 TV settings to prioritize traffic

V MIUI TV Optimize the network:

1. Go to Settings → Network and Internet → More.
2. Enable Game Traffic Mode (reduces delays).
3. Activate Auto-Update applications only over Wi-Fi.

Problems with video buffering

If YouTube or Netflix videos are slowing down:

• 🔍 Check the speed through Speedtest (should be at least 25 Mbps for the speed test). 4K).
• 🔧 In the router settings, enable QoS and set a priority for MAC-TV address.
• 📵 Turn off background apps on the TV: Settings → Annexes → Launched.

6. Solving Connection Problems

Let’s look at common mistakes and ways to fix them.

6.1 TV does not see Wi-Fi network

Possible causes and solutions:

• 🔍 Network hidden: manually add SSID TV settings.
• 📡 The router is running 802.11ac, The TV only supports the 802.11n: Enable compatible mode on the router.
• 🔋 Router power shortage: connect it to another source.

Error “Receiving” IP-address"

That means that DHCP-The router server does not give out an address:

1. Restart the router and the TV.
2. In the settings of the TV, specify static IP: Settings → Network and Internet → Wi-Fi → [Your network] → Additionally. → Settings IP → Static Indicate: IP: 192.168.1.100 (if router 192.168.1.1) Gateway: 192.168.1.1 DNS: 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare)

AP Isolation

Permanent breaks of connection

Causes and solutions:

• 📶 Weak signal: Use a Wi-Fi repeater or move the router closer.
• 🔋 Overheating of the router: provide ventilation.
• 🔄 Conflict IP: Reset the network settings on the TV.
• 🛠️ Outdated Router Firmware: Update It Through Web Interface (192.168.1.1).

⚠️ Attention: On Mi models TV 4 (2017-2019) when connecting to networks with WPA3 There may be an authentication error. WPA2 or update the TV firmware.

7. Features of connecting old Xiaomi models

Xiaomi TVs 2017-2019 (Mi) TV 3S, Mi TV 4A) They may have compatibility issues with today's networks. Here's how to solve them:

Update to firmware

Outdated software does not support WPA3 And the new Wi-Fi 6 standards:

1. Download the latest firmware for your model from the official website.
2. Copy the.zip file to USB-accumulator (FAT32).
3. Insert the flash drive into the TV and go to Settings → About TV → System Update → Local Update.

7.2 Connection to hidden networks

Older models don’t always work well with hidden ones. SSID. Decision:

• Temporarily make the network visible in the router settings.
• Connect the TV, then hide it again. SSID.

7.3 Problems with IPv6

Some models (Mi) TV 4C) supportive IPv6. Turn it off on the router:

1. Go to the router's web interface (192.168.1.1).
2. Find the section IPv6 and deactivate it.
3. Restart the router and the TV.

💡

For models older than 2020, it is recommended to disable Band Steering (automatic switching between 2.4 and 5 GHz) on the router, as it can cause connection breaks.

FAQ: Frequent questions