Connecting the registrar 70mai Xiaomi Redmi phone: full instructions with solutions to problems

Video recorders 70mai The two have become an integral part of safety for millions of drivers, and Xiaomi Redmi smartphones are among the most popular smart-driving devices, but the pairing of the two often raises questions: Why the phone doesn't see the recorder, how to set up traffic notifications, or why video slows down when viewing through the app. 70mai Redmi, but also reveals the nuances of connection optimization, solving typical errors and hidden functions that are not written in the standard instructions.

We have analyzed the reviews of the owners, tested different models of registrars (from the 70mai Pro to Omni and smartphones (Redmi Note) 12, Redmi 10, POCO X5), We're going to focus on the problems with the problem of universal guidance. MIUI 14/15, where standard network settings can block the connection to the registrar, if you have already tried to connect devices and received an error such as "failed to connect to the registrar's Wi-Fi" or "Application" 70mai You can’t see the device, you’ll find specific solutions, not general tips.

1.Preparation: What to check before connecting

Before you start pairing, make sure your devices meet the minimum requirements.Registrars 70mai (with the exception of the oldest models) support connection to smartphones with Android 6.0+ Bluetooth 4.0+. However, for stable work with Xiaomi Redmi is recommended:

• 📱 Android OS: version 8.1 or later (on the MIUI 12+ All functions of the application 70mai).
• 🔄 Software updates: check the relevance of the registrar firmware through the official application.
• 📶 Wi-Fi network: Registrar creates its own access point at 2.4 GHz (5 GHz not supported!).
• 🔋 Charging devices: when first connected, the registrar battery must be charged at least 30 times%.

Critical Feature for Redmi Owners: MIUI The default is "Wi-Fi Smart Switch," which can automatically turn off the logger connection if the signal is weak. Turn it off in Settings. → Wi-Fi → Additionally. → Intelligent switching.

Also check if the power saving mode blocks the background operation of the application. 70mai. For that:

1. Open Settings → Battery and Performance → Battery Consumption Management.
2. Find the app 70mai and select "No restrictions».

2. Connection methods: Wi-Fi vs Bluetooth

Registrars 70mai Support two types of smartphone connection: Wi-Fi (for video and settings) and Bluetooth (for notifications and basic commands.

Connection via Wi-Fi (main method)

This is the most functional way to view real-time video, download records and adjust the parameters of the recorder.

1. Turn on Wi-Fi on the Registrar: on most models 70mai You need to hold the Wi-Fi (or Menu) button for 3 seconds until the indicator flashes.
2. Find the Registrar Network: Open Settings on Redmi → Wi-Fi and select a network with a name 70mai_XXXX (where XXXX — unique number).
3. Connect: the default password is 12345678 (if it didn’t work, check the sticker on the registrar’s case).
4. Launch the application: Open up 70mai (Download from Google Play if not already installed. The app will automatically detect the registrar.

Once you connect to the Wi-Fi logger, your Redmi will lose access to the Internet.

• 🌐 Go to Settings. → SIM-maps and mobile networks → Access Point and modem → Modem mode.
• 🔄 Turn on the Wi-Fi Access Point and connect the registrar to the Internet via your smartphone (if the model supports this feature).

Bluetooth connection (for notifications)

Bluetooth connection is used to receive alerts about collisions, movement near the camera (in models with a high-speed camera). ADAS) And to control the voice, to activate it:

1. Turn Bluetooth on Redmi (Settings) → Bluetooth).
2. In the annex 70mai Go to the Device. → Settings → Connection via Bluetooth.
3. Click “Add Device” and select your registrar from the list.
4. Confirm the pairing on both devices.

After successful connection, you will be able to:

• 🚨 Get push notifications about impacts or movement near the car.
• 🎤 Use voice commands (for example, «70mai, take a picture»).
• 📱 Quickly turn on/off recording via the Redmi widget screen.

💡

If the Bluetooth connection is permanently broken, disconnect from the MIUI Responsive Bluetooth in Settings → Bluetooth → Additionally.

Set-up of the annex 70mai Xiaomi Redmi

Installing an application is only half the battle, and to avoid problems with work, you need to configure permissions and synchronization settings correctly.

Permits for the annex

MIUI It is known for its strict permission controls, which often leads to disruptions in the background services:

If after setting the permissions, the application still does not see the registrar, try:

1. Clear the application cache (Settings) → Annexes → 70mai → Clear the cache).
2. Reboot the smartphone and the recorder.
3. Remove and reinstall the application (sometimes helps in conflicts with the application). MIUI).

Optimization of the work with MIUI

Xiaomi Redmi based on the MIUI 14/15 has features that may interfere with the stable operation of the registrar:

• 🔋 Battery Optimization: Add an App 70mai Exceptions (Settings) → Battery → Choice of applications → 70mai → No restrictions).
• 📡 Background Limitation: C Settings → Special permits → Start in the background, allow the application to work in the background.
• 🔒 Block notifications: check if notifications are disabled in Settings → Notifications → 70mai.

4. Solving typical connection errors

Even with the right setup, Xiaomi Redmi users are faced with errors. Let’s consider the most common and ways to fix them.

4.1 Phone does not see Wi-Fi recorder

If the network 70mai_XXXX Not appearing in the list of available:

• 🔄 Reboot the Registrar: Turn it off the power for 10 seconds, then turn it on again.
• 📶 Check Wi-Fi range: Redmi can hide 2.4GHz networks if only 5GHz mode is enabled. → Wi-Fi → Additionally. → Wi-Fi range.
• 🔧 Reset network settings: hold the Reset button for 10 seconds on the registrar (data will not be deleted, only network settings).

If the network is visible but the connection fails:

• 🔐 Make sure the password is entered correctly (12345678 by default).
• 📱 On Redmi, turn off the Smart Wi-Fi Diagnostics feature in Settings → Wi-Fi → Additionally.

Annex 4.2. 70mai not connected to the registrar

If Wi-Fi is connected, but the application gives an error "Device not found":

1. Check out the app version – upgrade to the latest in Google Play.
2. Make sure that the Registrar is on mode. AP Mode (in some models, it turns off after 5 minutes of inactivity).
3. Try connecting via another phone (like iOS) to rule out a problem with the registrar.
4. If nothing helps, reset the registrar to factory settings (Reset button 15 seconds).

💡

On models 70mai A800S Omni for stable connection to Redmi requires to disable MIUI Traffic Control function (Settings) → SIM-maps and mobile networks → Traffic control).

Problems with watching videos

If the video is slowing down or not playing:

Advice for owners of Redmi Note 11/12: if the video is in the appendix 70mai playback with artifacts, try to disable hardware acceleration in the developer settings (Settings) → The phone. → Version. MIUI — slip 7 once, then settings → Additionally. → For developers → Turn off hardware acceleration).

5. Additional Features: What Can Be Configured After Connecting

Once you pair successfully, you get access to the advanced registrar capabilities. Let's look at the most useful ones.

5.1. Set up traffic notifications

To receive collision alerts:

1. In the annex 70mai Go to the Device. → Settings → Security → Collision notifications.
2. Turn on the option and set sensitivity (recommended "medium" for urban conditions).
3. In Redmi settings, allow the app to show notifications (Settings) → Notifications → 70mai).

When the impact sensor is triggered, you will get:

• 📲 Push notification on the Redmi screen.
• 📧 Email (if the mail is configured in the application).
• 📹 Automatically save 30 seconds of video before and after the event.

5.2 Access to the records archive

To view and download video from the registrar:

1. Connect to the Wi-Fi recorder.
2. In the annex 70mai Go to the Gallery section.
3. Select the desired file and click “Download” (video will be saved in the folder). 70mai Redmi's internal memory).

Alternative method: connect the registrar to the computer through USB Copy the files directly (folder) DCIM For Redmi, you can use Mi File Manager with support FTP:

Address: ftp://192.168.10.1


Login: admin




Password: 12345678

Voice control

Models. 70mai with voice command support (for example, A800S) They allow you to control the recorder without hands, to activate the function:

1. Connect to the recorder via Bluetooth.
2. In the app, turn on Settings. → Voice control.
3. Say a command, for example: «70mai, start recording" or «70mai, take a picture».

⚠️ Attention: voice commands are only available in Chinese and English, and basic commands such as "Start recording" or "Take a photo" are available for Russian-speaking users».

6.Optimize work to save Redmi battery

A constant connection to the recorder can quickly drain the Xiaomi Redmi, especially if Wi-Fi and Bluetooth are turned on simultaneously.

• 🔋 Turn off the Wi-Fi recorder after watching the video (Wi-Fi button for 3 seconds).
• 📴 Use Bluetooth for notifications only, and connect to watch videos via Wi-Fi as needed.
• ⚡ Set up the energy saving mode: in Settings → Battery → Select “Balanced” instead of “High Performance».
• 🔄 Update the registrar firmware as new versions optimize power consumption when connected to the registrar MIUI.

For Redmi models with battery ≤4000 mAh (e.g. Redmi 10) is recommended to use a portable charger for long-term video viewing from the recorder.

💡

On Xiaomi Redmi with MIUI 15 Adaptive Battery may limit application background performance 70mai. Turn it off in Settings. → Battery → Adaptive battery for stable notifications.

7. Alternative ways of connecting (without Wi-Fi)

If Wi-Fi connection is not possible (for example, due to incompatibility with the Internet) MIUI), escaping:

Connection through USB (model OTG)

Some registrars 70mai (For example, Dash Cam. 1S) Supports the connection to the phone via USB-OTG. For that:

1. Buy it. OTG-cable (Type-C or Micro-USB, depending on the Redmi connector).
2. Connect the registrar to the phone with a cable.
3. In the file manager (Mi File Manager) open the folder DCIM on the registrar's card.

⚠️ Note: when connecting through OTG The registrar will not record the video as the port USB It's a method that's only suitable for downloading archives.

7.2 Use of the memory card

The most reliable, but not the most convenient way:

1. Remove the memory card from the registrar.
2. Insert it into Redmi via an adapter (or connect it to your computer).
3. Copy the necessary files into the phone memory.

For Redmi models with a hybrid slot (for example, Redmi Note 11) you will have to temporarily donate the second one. SIM-card.

Cloud storage (for new models)

Registrars 70mai Omni and A800S Supports uploading video to the cloud via the mobile Internet:

1. Put it in. SIM-Card to Registrar (Nano-SIM supported).
2. In the annex 70mai Go to the Device. → Settings → Cloud storage.
3. Turn on the download and select events (for example, only an accident).

Videos will be available in the personal account on the site 70mai Please note that this requires a subscription (from 3).$ monthly).

FAQ: Answers to Frequent Questions