Modern users often face the need to switch between devices, and wireless headphones Xiaomi AirDots have become the standard of mobility. However, if the connection to a smartphone usually occurs automatically, setting up communication with a computer or laptop can cause questions for inexperienced users. The main difficulty lies in the activation of a special pairing mode, which is different from simply turning on the gadget.
In this guide, we will discuss all the steps of synchronization, from hardware preparation to fine-tuning the sound in the Windows operating system. You will learn how to correctly translate the case into search mode, why the laptop may not see the device and what actions will help eliminate typical driver errors.
The connection process is universal for most models of the series, whether it is Redmi AirDots, AirDots S or the newer versions of AirDots 2 and 3. It is important to consider the small nuances in managing touch buttons and indicators on different generations of devices. Follow the instructions carefully to enjoy high-quality sound without delay.
Preparation of equipment and charge check
Before starting the synchronization procedure, you need to make sure that all the components of the system are ready to work. Your laptop's Bluetooth module should be functional, and the headphones themselves should have a sufficient level of battery charge. If the case or the ears themselves are discharged to zero, they may not enter pairing mode or quickly turn off during the setup process.
It is recommended to pre-charge the case and the headphones attached to it for at least 30 minutes. The indicator on the front of the case usually lights up red during charging and fades or changes color to white / green at full charge. For models without an indicator on the case, focus on the LEDs of the headphones themselves when retrieving.
- 🔋 Make sure your laptop is connected to the network or has a battery charge of more than 20%.
- 🎧 Check the purity of charging contacts on the headphones themselves.
- 💻 Make sure your laptop has a Bluetooth driver installed (often modules from Intel, Realtek, or Qualcomm).
- 📱 Turn off Bluetooth on your smartphone so the headphones don’t automatically intercept the connection.
⚠️ Warning: If the headphones flash red when removed from the case, immediately place them back for charging.Attempting to pair at low charge can cause firmware failures.
It’s also worth checking if your Xiaomi AirDots are connected to other devices within range.The Bluetooth protocol has the feature of automatically connecting to the latest active gadget, which can block the search by a new device.
Activation of the pairing mode on headphones
The most critical step is to put the headphones in visibility mode. Unlike wired devices that work immediately after turning on, wireless models require manual search initiation. For Xiaomi AirDots, this procedure has its own features, depending on the generation of the model.
In most cases (AirDots, AirDots S, Redmi AirDots) you need to remove both headphones from the case. The case of the device has physical buttons or touch zones, you need to press and hold these buttons simultaneously on both headphones for 5-7 seconds.
💡
If you have a Xiaomi AirDots 3 or Pro model, they may not have physical buttons, in which case the pairing mode is often activated by long-term retention of the touch zone (about 5-7 seconds) or automatically when first removed from the case, if they have not previously been paired.
The visual signal for a successful transition to search mode is the frequent flashing of the indicator in white. If the indicators are flashing slowly or constantly burning, then the pairing mode is not activated. Repeat the procedure, making sure that you press the buttons in sync.
What if the headphones are not synchronized with each other?
Bluetooth setup in Windows 10 and 11
Once the headphones have moved into fast flash mode, you need to activate computer-side search. The interface of the Windows 10 and Windows 11 operating systems is almost identical in this aspect, but the paths to settings may vary slightly depending on the build version.
Open the Start menu and go to Settings (cog icon). Select Devices (in Windows 10) or Blueooth and Devices (in Windows 11). Make sure the Bluetooth slider is in the On position. If the switch is missing or inactive, it may be that the Bluetooth adapter is disabled physically or in Device Manager.
Press the button "Add Bluetooth or other device." In the window that opens, select the first item "Bluetooth". The system will start scanning the air. The list of available devices should show the name of your headphones, for example, Xiaomi AirDots or Redmi AirDots.