Connecting headphones Xiaomi Mi True to the phone over Bluetooth: full instructions with tips

Xiaomi Mi True wireless headphones (including Mi True Wireless Earphones 2/2S/Basic/Pro) have become a popular choice due to the combination of sound quality, compactness and affordable price. However, many users have difficulties when connecting to a smartphone for the first time – especially if it is a non-standard scenario (for example, after a reset or when using an iPhone).

It is important to understand that the connection algorithm may vary slightly depending on the headphone firmware version, smartphone model, and even the operating system (Android/iOS).We will look at the universal method, which works in 95% of cases, and also separately focus on the nuances for Apple devices and older versions of MIUI. If you have already tried to connect, but faced a problem (for example, headphones are not defined or only one is connected), at the end of the article there is a section with solutions.

1. Preparation of headphones Xiaomi Mi True to pair

Before you start connecting, make sure the headphones are ready to search over Bluetooth. This is critical: if you miss this step, the smartphone simply will not see the device in the list of available.

For Mi True Wireless Earphones 2/2S/Pro models, the pairing activation algorithm is the same:

• 🔋 Charging headphones: Place both headphones in the case and make sure the indicator on the case flashes white (charge level) >If the indicator is red, connect the case to the charger for 10-15 minutes.
• 🎧 Case extraction: pull out both headphones at the same time. They must automatically turn on (blitzes red/white LED on each one).
• 🔄 Activate the pairing mode: Press the touch panels on both headphones simultaneously for 5-7 seconds, until the indicators start flashing alternately red and white (this is a signal of readiness to connect).

For the Mi True Wireless Earphones Basic (without touch panels), use a mechanical button on each headphone: press it for 3 seconds until double blinking.

⚠️ Note: If the headphones were previously connected to another device, they must first untie in the Bluetooth settings of that device or reset the headphone settings (clip the buttons for 10 seconds until triple blinking red).

Recharge the case to white indicator |

Remove both earphones from the case|

Press the touch panels for 5-7 seconds |

Wait for alternate flashing red/white|-->

2. Step-by-step instructions for connecting to an Android smartphone

The process of pairing with Android phones (including devices Xiaomi, Samsung, Honor, etc.) takes no more than 1-2 minutes, if the headphones are properly prepared.

1. Open Settings → Bluetooth on your smartphone and turn on the module (slider in the position “On”).
2. In the list of available devices, find the name of your model (for example, Mi True Wireless Earphones). 2 or LE_Mi Tap it on it.
3. Confirm pairing (if you request access to contacts / microphone – allow, this is necessary for Hands-Free profile).
4. Wait for the status of Connected under the name of headphones.

Xiaomi smartphones with MIUI 12/13/14 may have a pop-up after connecting with a suggestion to install the proprietary Mi Earphones app (available on Google Play).It is not necessary for work, but adds advanced equalizer settings and display of charge level.

⚠️ Attention: On some firmware MIUI (Especially customized) may not have profiling support A2DP 1.3, which will make the sound intermittent. The solution is to update the firmware or use the Developer Options app to force Bluetooth on. AVRCP 1.6.

Mi True Wireless Earphones 2|

Mi True Wireless Earphones 2S|

Mi True Wireless Earphones Basic|

Mi True Wireless Earphones Pro|

Another model|-->

3. Features of connection to iPhone (iOS)

While Xiaomi Mi True headphones aren’t officially certified for iPhones, they’ve been working with Apple devices since iOS 12.

• 📱 No charge display: Unlike AirPods, the headphone battery level will not show up in the battery widget on the iPhone. HD+.
• 🔊 Limited codecs: iPhone supports only SBC and AAC, Sound quality can be worse than Android with aptX.
• 🎵 Sound Lag: When watching videos on YouTube or Netflix, lags of up to 200ms are possible. Solved by enabling Low Lag in Bluetooth settings (if available).

Instructions for iPhone:

1. Go to Settings → Bluetooth and turn on the module.
2. Make sure the headphones are in pairing mode (flashing red/white).
3. In the Other Devices list, select your model (the name may appear as Mi True... or LE_Mi...).
4. Confirm the connection. If you see a notification that says "Not supported," ignore it, the sound will work.

💡

If the headphones connect to the iPhone only one at a time, try resetting their settings (clip the buttons for 10 seconds until triple blinking red), then repeat pairing.

Typical problems and their solutions

Even with the right connection, users face a number of common errors, and let's look at the most common ones and how to fix them:

4.1 Headphones are not defined by the phone

• 🔄 Headphone reset: Place both headphones in a case, then press the touchpads for 10 seconds until triple blinking red.
• 📱 Bluetooth Reboot: On your phone, turn off/on Bluetooth or reboot your device.
• 🔋 Charge problems: If the indicator on the case is not burning, check the cable and charging port. Sometimes cleaning the contacts in the case with a cotton swab moistened with alcohol helps.

Only one headphone is connected.

This problem most often arises from:

• 🎧 One earpiece discharge: Place both earbuds in a case for 5-10 minutes to level the charge.
• 🔗 Sync failure: Take both headphones out of the case, press the touchpads for 5 seconds before double blinking, then reconnect.
• 📲 Conflict with another device: Remove headphones from the list of associated devices on all gadgets they previously connected to.

Intermittent sound or interference

Causes and solutions:

• 📶 Interference from other devices: Disable nearby wireless speakers, 2.4GHz routers or microwaves.
• 🔊 Incorrect codec: On Android in Settings → Bluetooth → Select the sound settings SBC instead of aptX (if available).
• 📱 Power Saving: Turn off Bluetooth Battery Optimization Mode in Phone Settings.

5. Additional settings and chips

Once connected successfully, you can optimize your headphones for your needs, and here are some useful features:

5.1. Guest management

Mi True Wireless Earphones 2/2S supports touch control.

• 🎵 Reproduction/pause: One touch on any earpiece.
• 🔀 Next Next post: Double touch of right earphone.
• ⏮️ Previous Previous post: Double touch of left earphone.
• 📞 Acceptance/rejection of a call: One/double touch, respectively.

For Mi True Basic, the control is carried out by a mechanical button: 1 press – pause, 2 press – the next track, 3 presses – the previous track.

5.2 Customization of sound via Mi Earphones

The Mi Earphones app (available for Android) allows you to:

• 🎛️ Choose one of 12 preset equalizers (e.g. Bass, Voice, Jazz»).
• 🔇 Set up noise cancellation (ANC) The Mi True Wireless Earphones 2S.
• 📊 View usage statistics and charge level of each headphone.

The application can be downloaded at the link:

https://play.google.com/store/apps/details?id=com.xiaomi.miearphones

On the iPhone, there are no similar features, but you can use third-party equalizers like Equalizer FX.

5.3 Multi-threaded connection (Multipoint)

Xiaomi Mi True headphones (except Basic) support two devices at once, for example, you can listen to music from your phone and take calls on your laptop.

1. Connect the headphones to the first device (for example, a smartphone).
2. Activate the pairing mode on the headphones (press the touch panels for 5 seconds).
3. Connect to the second device (laptop or tablet) through its Bluetooth settings.

To switch between devices, it is enough to play the sound on the desired gadget - the headphones will automatically reconnect.

💡

Multithreaded connectivity works only with devices that support Bluetooth 5.0+. On the iPhone, there may be problems with automotive switching - in this case, you will have to manually turn off / connect the headphones in the settings.

6. Update to the headphone firmware

The manufacturer periodically releases firmware updates for Xiaomi Mi True, which improve connection stability, add new features or fix bugs. You can check and update the firmware through the official Mi Earphones app (Android only):

1. Put the headphones on the phone.
2. Open the Mi Earphones app and go to the firmware update section.
3. If a new version is available, click Update and wait for the process to be completed (the headphones will reboot).

Important:

• 🔋 Make sure the charge level of the headphones and case >50%.
• 📱 Do not turn off Bluetooth or close the app during the update.
• ⏳ It takes 2-5 minutes. Once updated, the headphones automatically reconnect.

⚠️ Attention: If the update fails (e.g., the phone goes out), the headphones may stop turning on. In this case, place them in the case, plug the case into the charger and wait 10 minutes - this usually resets the error. If the problem persists, contact Xiaomi Support.

7. Comparison of Xiaomi Mi True models

If you haven’t bought headphones yet and are choosing between models, here’s a quick comparison of their key characteristics:

For most users, the best choice is the Mi True Wireless Earphones 2S, which offers a balanced ratio of price, time and sound quality. The Pro model is suitable for music lovers, and the Basic is suitable for those who are looking for a budget option for calls.

FAQ: Frequent questions