Lugacom mobile internet connection on Xiaomi smartphones: from APN to troubleshooting

Why is Lugacom and Xiaomi the perfect combination?

Xiaomi smartphones have long established themselves as reliable devices with flexible network settings, and Lugacom offers one of the most profitable coatings. 4G/5G But even with the perfect combination of iron, + Users often face connection problems, from no network to slow speed. This article will not just tell you how to enter settings. APN — We will examine all stages: from the choice SIM-maps to fine-tuning parameters for maximum speed.

It is important to understand that the setup procedure may vary depending on the Xiaomi model (e.g., on the Redmi Note 12 and the other two). POCO F5 The paths to the network menu are different) and versions MIUI (into MIUI 14 the interface has changed compared to MIUI We've taken these nuances into account and developed universal solutions that work on 90% of the brand's devices. SIM-You've either switched from a different operator or you've already got a map, start with the first partition. If the Internet is already connected but it's not stable, then you can go to the troubleshooting section right away.

Before you start, check two key points: 1 Make sure your SIM-card activated (on new maps Lugacom activation takes up to 24 hours). 2 Check the coverage area of the operator on the official map - in some areas 4G It can only work on the frequency. B20 (800 MHz, which not all Xiaomi models support out of the box".

Choice SIM-cards: nano-SIM, eSIM or combo variant?

Lugacom offers three formats SIM-The choice of the cards depends not only on the ease of installation, but also the stability of the network. Most modern Xiaomi smartphones (starting with the Redmi Note 10 2021) support nano-SIM and eSIM, but there are nuances:

• 📱 Nano-SIM: universal option for all models.If your XiaomiReleased is before 2020 (e.g. Redmi) 8A), Check for a slot for the second SIM — Some budget models only support one physical card.
• 🔄 combo-SIM (nano + micro: suitable for older devices, but may cause problems with contact in the slot.
• 📲 eSIM: available for flagships (Xiaomi 13 Pro, POCO F5 Pro and some mid-budget models (Redmi Note 12 Pro)+). Important: Lugacom’s eSIM is tied to IMEI Devices – transferring another smartphone will require a visit to the operator’s office.

If you are choosing between a physical SIM and an eSIM, consider:

• ⚡ eSIM activates faster (5-10 minute 1-2 physical-card).
• 🔧 Physically SIM It is easier to transfer to another phone or use in two devices (for example, in a smartphone and tablet).
• 📡 In some regions, Lugacom may not support VoLTE (voice on the Internet). 4G), What's critical for call quality.

⚠️ Note: If you are using Xiaomi with a hybrid slot (like the Redmi Note 9 Pro), remember that when installing the second one, you can use the second one. SIM-card disables microSD support. Check priorities in settings along the Settings path → SIM-maps and mobile networks → Double. SIM.

APN setup: step-by-step instructions for MIUI

The correct APN (Access Point Name) settings are the basis of a stable Internet. Lugacom uses standard settings, but in some cases (for example, after the MIUI update) they are reset. Here's how to restore them:

1. Open Settings: Go to Settings → SIM-maps and mobile networks → [Choose. SIM Lugacom] → Access points (APN).
2. Add a new APN: Click on the + icon or select New Access Point.
3. Fill in the fields: Enter the parameters from the table below. Leave the fields not listed in the table unchanged.

After filling, save the settings and restart the smartphone. If the Internet does not work:

• 🔄 Try switching to another type of network: Settings → SIM-map → Preferred type of network → choose 4G (preferably).
• 📡 Make sure that the icon is displayed in the status bar 4G or LTE (not 3G or).
• 🔧 If you use Xiaomi with custom firmware (e.g. Xiaomi.EU), check for the module. RIL for your region.

Access Point Name = Lugacom 4G|

APN = internet.lugacom.ru|

Type APN = default,supl|

Proxies and port not listed |

Protocol IPv4/IPv6 (motor-car)-->

Network type optimization: 4G, 5G or automatic selection?

Xiaomi smartphones support multiple modes of mobile network operation, and the wrong choice can lead to reduced speed or increased battery consumption.

• 📶 2G (GSM): just a voice and SMS, Internet speeds up to 240 Kbps (not recommended).
• 📱 3G (UMTS/HSPA): speed 42 Mbps but high latency (ping) 100-300 miss).
• ⚡ 4G (LTE): The main mode for the Internet (speed to the Internet) 150 Mbps, ping 30-80 miss).
• 🚀 5G (NR): available in a limited number of cities (Moscow, St. Petersburg, Kazan) at the rates "Unlimited" 5G".

To change the network mode on Xiaomi:

1. Go to Settings. → SIM-maps and mobile networks → [Choose. SIM Lugacom] → Preferred type of network.
2. Choose one of the options: 4G (preferably) is the optimal balance of speed and power consumption. 5G/4G/3G/2G (auto) is an automatic choice, but can lead to frequent switches. 4G is the only forced mode for stability (recommended if 5G is not available in your area).

Advice for owners 5G-Smartphones: If you have coverage in your city 5G from Lugacom, but the smartphone does not connect, check:

• 🔧 Whether support is included 5G in settings: Settings → SIM-map → Turn on 5G.
• 📡 Does your model support ranges? n78 (3.5 GHz) or n1 (2.1 GHz) that Lugacom uses, such as the Redmi Note 11 Pro+ 5G supportive POCO X3 Pro - no.
• 💳 Is the tariff connected with support 5G (In most cases, a tariff of 800 is required. ₽/moss).

💡

If the speed of the Internet has not changed after switching to 4G, try to manually select the operator’s network: Settings → Mobile Network → Network Operators → Network Search and select Lugacom (not “Automatically”).

How to check the speed and what to do if it is low?

Even with the right APN settings, the speed of the internet can be frustrating, so you can objectively assess the quality of the connection.

1. Install the Speedtest by Ookla or nPerf app from Google Play.
2. Run the Download, Upload, and Ping test.
3. Compare the results with the stated Lugak for your tariff (for example, for "Unlimited 100" the minimum speed is 10 Mbit / s).

Normal indicators for the Lugacom network:

• 📊 4G: 20-80 Mbit/s (loading), 5-20 Mbit/s (recoil), ping 30-100 miss.
• 🚀 5G: 100-300 Mbit/s (loading), 20-50 Mbit/s (recoil), ping 10-40 miss.

If the speed is lower than expected:

• 📡 Coverage problem: Check the signal level in the status bar. 2-3 "Sticks” try to move closer to the window or use a signal repeater.
• 🔄 Network congestion: During peak hours (18:00-23:00) speed may fall 30-50%. Try the test during the daytime.
• 🔧 Operator restrictions: At some tariffs Lugacom after exhaustion of high-speed traffic speed is limited to 128 Kbps.
• 📱 Problems with the device: Xiaomi with firmware MIUI 13+ It can trigger energy saving for mobile data. Turn it off in Settings. → Battery → Energy saving regime → Background restriction.

Troubleshooting: From lack of network to authentication errors

If the Internet on Xiaomi does not work at all or is unstable, follow this algorithm:

1. Check the basic settings: 🔌 Make sure that the data transfer is enabled (Icon) 4G/LTE status-line). 📵 Check if flight mode or energy saving mode is activated. 🔄 Reboot your smartphone – it resets the temporary errors of the communication module.
2. Diagnostics SIM-map: 📱 Try inserting. SIM If the Internet is working, the problem is in the settings of Xiaomi. 🔧 Clear the contacts. SIM-cards with a dry wipe (oxidation can disrupt communication). 🆔 Check that IMEI Your device is not on the blacklist (see below). IMEI: *#06#).

Control of the operator's network:

• 📡 Manually select the network: Settings → Mobile network → Network operators → Search → Lugacom.
• 📞 Call 679 (free Lugacom support) to see if there are any technical works in your area.

Common mistakes and their solutions:

⚠️ If after all the manipulations the Internet did not work, and in another phone SIM-The card is working, the problem may be in the communication module of your Xiaomi, which is typical for devices that have been repaired or crashed.

How to reduce battery consumption when using mobile Internet?

Mobile Internet is one of the main charge eaters on Xiaomi, especially if the network is unstable.

• 🔋 Turn off background data transfer for unnecessary apps: Go to Settings → Annexes → App management. Select an app (e.g. Facebook or TikTok) Disable Background and Auto Run.

Use 4G mode only.

Activate the dark theme

Xiaomi

Set up automatic disabling of mobile data

→ SIM-maps and mobile networks → Data Transfer → Schedule

For advanced users:

• 🛠️ Install the AccuBattery app to monitor battery consumption by component.If the Android System module consumes >20% – The problem with optimization MIUI.
• 🔧 On the firmware MIUI 14+ Turn off the Smart Network Distribution function in Settings → Battery – it can force the network to switch in the background.
• 🛡️ Setting up DNS To speed up the loading: Use of public DNS (Cloudflare or Google can speed up the opening of websites on the Internet 10-30%. For this: Install the app 1.1.1.1: Faster Internet. Select DNS-Cloudflare server (1.1.1.1) Google (8.8.8.8). Activate Warp mode for additional traffic encryption.

For Xiaomi owners with root rights:

• 🛠️ Install Magisk with Network Signal Guru to fine-tune network settings (e.g., forced connection to a tower with the best signal).
• 📡 Change the build.prop file by adding lines to optimize LTE: ro.telephony.default_network=22 persist.radio.lte_vr_en=1 Note: Editing build.prop requires knowledge and may result in device failure.

If SMS It's not coming, check it out:

• 📱 Does your Xiaomi model support automatic setup (on some custom firmware devices, this is disabled).
• 🔧 Does not block antivirus or firewall (for example, Avast) incoming SMS service-number.

If the Internet is not being distributed:

• 🔧 Check it out.