Connection of mobile Internet "Phoenix DPR" on Xiaomi: full instructions with solutions to problems

Mobile operator Phoenix in the Donetsk People’s Republic provides access to the 4G-Internet with local tariffs, but set up the connection on Xiaomi smartphones (especially with the MIUI) It's often complicated. It's not automatic configuration that causes problems. APN, In this article, you can find step-by-step instructions for Redmi models, POCO Mi, including solutions to common errors such as “No Internet connection” or “Calls only».

It is important to note that the settings APN For Phoenix DPR, it is different from Russian or Ukrainian operators. MCC-MNC code 255-03, not standard 250-XX In addition, some Xiaomi models (especially those with global firmware) may require manually adding an operator to the list of available networks, and we will take a look at everything from basic setup to advanced tricks to speed up communication.

1. Preparation of the Xiaomi smartphone to set up the “Phoenix DPR”

Before setting up the internet, check out three key points:

• 📱 Smartphone model: Make sure your Xiaomi supports the DPR Phoenix frequencies» — LTE Band 3 (1800 MHz) and Band 20 (800 MHz).For example, Redmi Note 10 Pro or POCO X3 The Pro is perfect, and older models like the Redmi are perfect. 4X can only work in 3G.
• 📋 Version. MIUI: On global firmware (e.g, MIUI Global 14) may not have the option of manual addition APN. In this case, you will need to switch to MIUI Russia MIUI Europe.
• 🔄 Updates: Check the relevance of the software in Settings → The phone. → System updates. Outdated versions MIUI Sometimes they are in conflict with local operators.

If you use Xiaomi with two SIM-With cards, make sure that the Phoenix DPR slot is set up as the primary data transfer slot:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose a slot with a Phoenix card.
3. Activate the mobile data switch and 4G (recommended).

⚠️ Note: If the list of operators does not include Phoenix DPR, do not try to select MTS Russia or Kyivstar, this will lead to an error in registration on the network).

Manual addition APN for Phoenix DPR»

Automatic setup APN The Phoenix DPR is not stable, so you'll have to enter the parameters manually:

1. Open the Settings. → SIM-maps and mobile networks → Phoenix DPR → Access points (APN).
2. Click Add Access Point (or "+" in the upper right corner).
3. Fill in the fields according to the table below:

After saving the new access point:

1. Select her from the APN list.
2. Reboot your smartphone (required!).
3. Enable Data Transfer and check for icon appearance 4G/LTE status-line.

⚠️ Note: If after setting up APN The internet is not working, check if it is blocking. MIUI Optimized Battery Mobile Data. Go to Settings for this → Battery → Battery mode and disable optimization for SIM card and Phone apps».

3. manually configure the network (if the automatic search does not work)

If the smartphone does not find the Phoenix DPR network automatically, you will have to add the operator manually, which is relevant for Xiaomi models with global firmware or after resetting.

Instructions:

1. Go to Settings. → SIM-maps and mobile networks → Networking.
2. Turn off Automatic Selection.
3. In the list of operators, select Manual input (or Add operator).
4. Enter the data:

Operator name: Phoenix DNR


MCC: 255




MNC: 03




Type of network: LTE/GSM (auto)

After saving, wait for the registration on the network (it can take up to 2 minutes). If an error does not appear on the network, try:

• 🔄 Reboot your smartphone.
• 📶 Temporarily turn on Flight Mode for 30 seconds, then turn off.
• 🔧 Reset network settings in Settings → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.

Critical detail: on some Xiaomi models (e.g. Redmi) 9A) The manual addition of the operator is blocked by the firmware, in which case only the flashing on the custom screen will help. MIUI or use of the engineering menu (described in section 5).

💡

If the Internet is running after manual setting up, but the speed is low (for example, instead of the Internet). 4G map+), try it out APN change the parameter Type APN Default, Supl, and Reboot the Phone.

4. Solving typical connection errors

Even after the correct setup APN Xiaomi users are facing errors. Let's look at the most common ones and how to fix them:

Error 1: “No Internet connection” (Icon! next to the network indicator)

Causes and solutions:

• 🔌 APN Not saved: On some firmware MIUI After resetting, settings are reset APN. Solution - Install the application APN Settings from Google Play and save configuration through it.
• 📵 Lockdown IMEI: If previously the smartphone was used with another operator (for example, MTS Russia»), IMEI Check the status in the engineering menu (code #4636## → Phone information).
• 🔒 Limitations MIUI: Global firmware may block access to local operators. Solution - change region to "Russia" in Settings → Additionally. → Region.

Mistake. 2: «Calls only" (no badge) 4G/LTE)

This is most often due to incorrect network settings:

• 📡 Check what's in the Settings → SIM-map → Network type selected 4G (recommended, rather than 3G or 2G.
• 🔄 If you're optional 4G Unavailable, update firmware or reset network settings.
• 🔧 In the Engineering Menu (#4636##) select Network Settings → Set preferred network type → LTE only.

Error 3: “Not registered online”

This mistake is typical for new SIM-Phoenix DPR maps. Solutions:

• 📞 Call the short number *100# – sometimes this activates the card.
• 🔄 Reboot your smartphone with the removed SIM-with a card, then insert it back in.
• 📶 Manually select the Phoenix DPR network (see Section 3).

5. Advanced methods: engineering menu and custom firmware

If the standard methods didn't work, try the engineering menu or the alternative firmware, which is suitable for power users.

Method 1: Engineering menu (for forced connection to the LTE)

Steps:

1. Enter the code ##4636## in the Phone app.
2. Go to the tab Information about the phone.
3. In the Set Preferred Network Type section, select LTE only.
4. Go back and select Network Settings. → Choice of operator → Manually, then find the Phoenix DPR».

If the Internet is running after these actions, but the speed is low, check the parameter. LTE Band on the engineering menu. Band 3 and Band 20 must be active for Phoenix DPR.

Method 2: Install custom firmware (to unlock the operator)

On some Xiaomi models (e.g. Redmi Note 9 Pro), the DPR Phoenix may not be displayed due to firmware limitations. MIUI Europe or PixelExperience:

• 🔓 Unlock the bootloader via Mi Unlock Tool (requires Xiaomi account and wait 7 days).
• 📥 Download the firmware. MIUI Europe for your model from the website miui.eu.
• 🔧 Set it through TWRP Recovery (instructions are available on the forum) 4PDA).

⚠️ Attention: Installing custom firmware will void warranty and may result in device blink.Before the procedure, make a backup via Mi PC suite TWRP.

💡

If you're not sure about your skills, you should go to a service center. Wrong firmware can make your smartphone unsuitable for any type of work. SIM-map.

6. Optimization of Internet speed “Phoenix DPR” on Xiaomi

Even after a successful connection, the speed may be lower than expected.

Method 1: Disabling restrictions MIUI

Firmware MIUI It's the default to limit background traffic:

1. Go to Settings. → Annexes → Application management → Three points (⋮) → Special permits → Data limitation.
2. Find applications that use the Internet (browser, instant messengers), and disable restrictions for them.

Method 2: Change of parameters APN speed up

Add to the settings APN (section 2) the following parameters:

Type APN: default,supl,mms,dun


APN Protocol: IPv4/IPv6




Roaming protocol: IPv4

Method 3: Using a VPN to circumvent restrictions

Some users note that the speed of the Phoenix DPR increases when connecting to the VPN. Recommended services:

• 🌍 ProtonVPN (free rate).
• 🚀 Cloudflare Warp (optimized for mobile networks).

Important: Not all VPN They work in the DPR, so check the availability of servers first.

7. Alternative ways of connecting (if nothing helped)

If setting up the internet on Xiaomi proved impossible, consider the alternatives:

Option 1: Distributing the Internet from another device

If you have a second smartphone (such as Samsung or Realme) that supports the DPR Phoenix, turn on the Wi-Fi hotspot:

1. On the second phone, go to Settings. → Access Point and modem → Mobile access point.
2. Set a password and turn on the distribution.
3. On Xiaomi, connect to the created Wi-Fi network.

Option 2: 4G-modem

External modems (e.g. Huawei) E3372) They often work better with local operators:

• 🔌 Connect the modem to USB-port OTG-adapter).
• 📶 In the modem settings, select APN internet.phoenix.
• 🌐 Turn on Wi-Fi on the modem and connect to it with Xiaomi.

Option 3: Double SIM + adapter

If your Xiaomi does not support the Phoenix DPR, but there is a second smartphone with a working one SIM-map, use SIM-Adapter for two cards simultaneously, such as the Dual adapter. SIM 12-in-1 You can insert two nano-SIMs into one slot.

⚠️ Note: Network definition problems may be possible when using adapters. Check compatibility with your Xiaomi model before buying (for example, on AliExpress in reviews).

FAQ: Frequent questions about setting up the “Phoenix DPR” on Xiaomi