A smartphone today is impossible to imagine without access to the global network, and Xiaomi devices are no exception. Whether you just unpack a new gadget or face a sudden failure, the ability to properly configure the Internet is a basic skill that every user needs. Owners of Redmi and POCO phones often face the nuances of the MIUI or HyperOS shell, which require a special approach to configuration of network parameters.
In this article, we will take a look at all possible ways to connect, from standard settings through menus to manually entering parameters for specific carriers, and you will learn not only to enable data transfer, but also to optimize network operation for maximum speed and stability of connection in all conditions.
Preparation for network connection setting
Before you start any manipulation of network settings, you need to make sure that the basic requirements are met. SIM-cards in the tray of the device, because without an active SIM card, mobile Internet will not work. Make sure that you have funds on your balance or a data transfer plan is connected.
If you plan to use a Wi-Fi wireless connection, check your home or work network password in advance. For mobile Internet, it is important that your carrier’s 3G or 4G/LTE coverage is present in your region of stay.
Also pay attention to the state of your smartphone software. An outdated firmware version may contain errors that block network modules. Check the relevance of the software in the Settings → About phone section and, if necessary, update the system to the latest available version.
💡
Before setting up the Internet, restart your smartphone – this often solves 80% of problems with hanging network modules without deep immersion in the settings.
Mobile Internet settings (4G/LTE/3G)
To activate mobile Internet on Xiaomi devices, it is usually enough to perform a few simple actions in the settings menu. APN (access points) do not occur and the user has to enter data manually, this is especially true for virtual operators or when using the data. SIM-maps from other regions.
To activate the data transfer, lower the notification curtain on the top of the screen and find the Mobile Data icon. Click on it to light up in blue. If the icon is not active, go to the Settings menu. → SIM-cards and mobile networks and turn on the switch opposite the desired SIM card.
It is important to choose the right type of network for maximum speed. In modern smartphones Redmi and POCO default mode is “preferably 5G” or “4G”, but in areas of poor reception it is better to force 3G to keep the connection stable, albeit less fast.
- 📶 Type of network: choose 4G/LTE Maximum speed of loading pages and videos.
- 💾 Data roaming: only enable when traveling abroad to avoid bills.
- 📡 Access Point: Check if you have selected an active SIM-default-card.
Manual setting of the access point (APN)
Sometimes the Internet doesn't work, even though there's money in the account, and the 4G icon is displayed. 90% of the time, the problem is in the wrong APN hotspot. The carriers require the exact address of the server through which the access to the global network is being accessed.
For manual settings go to the Settings menu → SIM-maps and mobile networks → Choose. SIM-map → Access points (APN). In the list that opens, click the “New Access Point” button or icon «+» In the upper right corner of the screen, you'll need to enter the data that your operator has provided.
Usually, fill in the Name and APN fields. The other options, such as the proxy server or port, are often left blank unless the operator has indicated otherwise. After entering the data, be sure to click the menu (three dots) and select Save, and then activate the new access point.
⚠️ Note: When manually entering parameters APN Keep a close eye on the letter register and no extra spaces, and even one erroneous letter in the access point address will cause the mobile Internet to be completely inoperable.
Below is a table with settings for popular operators that can come in handy with manual configuration:
| Operator. | Name (Name) | APN (Access Point) | Type APN |
|---|---|---|---|
| MTS | MTS Internet | internet.mts.ru | default,supl |
| Beeline | Beeline Internet | internet.beeline.ru | default,supl |
| Megafon | Megafon Internet | internet | default,supl |
| Tele2 | Tele2 Internet | internet.tele2.ru | default,supl |
What if the Internet does not appear after entering APN?
Connection to Wi-Fi network
Wireless Wi-Fi is the main way to access the Internet at home and in the office, allowing you to save traffic mobile operator. in smartphones Xiaomi connection process is most automated, but has its own features in the interface of the shell MIUI.
To connect, open the Settings → Wi-Fi menu or use the Quick Access Control Center. Wait for your smartphone to scan the airwaves and display a list of available networks. Find your network name (SSID) in the list and click on it.
Enter your password by following the letter register. If you enter it correctly, the network icon will show "Connected" and the fan or wave icon will appear in the status bar. If the network is hidden, click "Add Network" at the bottom of the list and enter the name and type of encryption manually.
- 🔒 Security: Always use a type of encryption WPA2/WPA3 Protect your data from interception.
- ⚡ Frequency: 5GHz networks provide higher speeds but have a shorter range compared to 2.4GHz.
- 🔄 Auto Connection: Activate this feature for frequently used networks so that the phone connects to them automatically.
In some cases, the smartphone may not see the network or permanently disconnect from it, which may be due to channel overload or power saving settings. Try to forget the network (by clicking on the gear next to the network name and selecting "Delete") and connect again.
💡
For stable connections in apartment buildings, it is preferable to use the 5 GHz band, since it is less susceptible to interference from neighboring routers.
Use of the function "Access Point" (Modem mode)
Xiaomi smartphones can act not only as receivers, but also as Internet distributors. The Wi-Fi hotspot feature allows you to stream 4G mobile Internet to other devices: laptops, tablets or friends' phones, which is a very useful feature when traveling or without wired Internet.
To activate modem modem, go to Settings → Wi-Fi Access Point. Here you can set your network name and password so that outsiders can not use your traffic. It is recommended to set a complex password containing letters and numbers.
The same menu also offers advanced settings, such as selecting a frequency range (2.4 GHz or 5 GHz) and limiting the number of devices you can connect to, and you can set a timer to turn off the access point to save battery power if no one is connected to it for a certain time.
⚠️ Attention: Distributing the Internet through the hotspot significantly speeds up battery discharge and increases mobile traffic consumption.
In addition to Wi-Fi, Xiaomi has a feature «USB-It allows you to transfer the Internet to your computer via cable, which provides a more stable connection and charges the phone at the same time. To do this, connect the phone with a cable to your PC, go to the access point settings and turn on the switch «USB-modem».
☑️ Security check of the access point
Solving Common Connection Problems
Even with the right setup, there can be situations where the Internet on Xiaomi is unstable or disappears altogether. One of the common causes is a malfunction in the network services of the Android operating system, in which case the resetting of network settings helps.
This procedure will return all Wi-Fi, Bluetooth and mobile settings to factory values.Your personal files, contacts and applications will remain intact, but you will have to re-enter passwords from all Wi-Fi networks. Reset via Settings menu → Connection and Sharing → Reset Wi-Fi, mobile networks and Bluetooth.
Another cause of problems may be the incorrect operation of the date and time: if the time on the phone is very different from the real one, the site security certificates will not be checked, and the Internet will not work.
- 📵 Flight Mode: Turn it on and off to restart the network module.
- 🧹 Cache cleanup: in some cases, cleaning the cache of the system application “Settings” helps».
- 📲 Reshuffle SIM: remove the SIM card, wipe the contacts and paste back, making sure the position is correct.
If none of the above has worked, it may be a hardware problem or a carrier lock, in which case you should contact your carrier’s technical support or Xiaomi’s authorized service center.