Jabra wireless headphones are a popular choice among Xiaomi smartphone users, but the process of connecting them does not always go smoothly. Even experienced gadget owners face problems: the headset is not found in the list of devices, the sound is interrupted, the microphone works with interference. In this article, we will analyze all the ways to pair Jabra with Xiaomi, Redmi and POCO phones, and also give recommendations for setting up for stable operation.
Jabra devices have a variety of connectivity protocols: classic Bluetooth, Bluetooth LE (for low-power models), and even USB-C for some flagship headsets, while Xiaomi’s MIUI-based smartphones have their own nuances in working with external accessories, from background restrictions to conflicts with proprietary codecs. We tested connectivity on Jabra Elite 85t, Elite 4 Active, Talk 45 and Evolve 20 models, and are ready to share working solutions.
1. Connection Preparation: What to Check Before Connection
Before you try to pair Jabra with Xiaomi, make sure both devices are ready to go, often because of basic omissions:
- 🔋 Battery charge: Headphones should have a charge level of at least 30%.Some Jabra models (e.g. Elite) 75t) refuse to be included in the coupling mode at low charge.
- 📱 Version. MIUI: On smartphones with MIUI 12.5 or later, background Bluetooth processes can be blocked. Check the battery settings (path: Settings) → Annexes → Application management → System applications → Bluetooth).
- 🔄 Resetting: If the headset has previously been connected to another device, reset via a button combination (usually holding the power button). + Increase volume within 10 seconds).
- 🛡️ No interference: Make sure there are no other active Bluetooth devices (such as smartwatches or speakers) nearby that can create channel conflicts.
Pay special attention to the power saving mode on Xiaomi. In the Redmi Note 11 and later, the default feature is activated, "Battery Optimization for Bluetooth", which can break the connection when you lock the screen. Disable it from the Settings menu → Battery → Battery → Battery Optimization, find Bluetooth and select "No restrictions".
2. Standard Bluetooth connection: step-by-step instructions
The basic pairing method is suitable for most Jabra models and Xiaomi smartphones.
- Activate the pairing mode on the headphones: For Jabra Elite: hold the power button for 5-7 seconds until the indicator starts flashing blue and red. For Jabra Talk, open the case (if any) or hold the call button for 3 seconds. For Jabra Evolve, move the slider on the body to the "On" position and hold the Bluetooth button for 5 seconds.
- Turn Bluetooth on Xiaomi: Swipe down from the top edge of the screen and hold the Bluetooth icon (or go to Settings → Connections → Bluetooth). Activate the switch and wait for the device to appear in the "Available Devices" list.
Perform the conjugation
- Click on the name of your headset (like the Jabra Elite 85t).
- Confirm the connection on both devices (sometimes you need to enter) PIN-code - by default 0000 or 1234).
What if Xiaomi doesn’t see Jabra after a reset?
4.Setting up the sound and microphone after connecting
Successful pairing is only half the battle, and to achieve sound quality and microphone stability, you need to adjust it further, starting with the basics.
- 🎧 Bluetooth Codecs: Xiaomi uses default SBC — The most versatile, but not the highest quality codec. AAC (Better for music) and aptX (low latency) to change the codec: Go to Settings → Connections → Bluetooth. Click on the gear icon next to the Jabra plugs. Select Audio Codec and install it. AAC or aptX (if supported).
Microphone setup
Jabra Sound+
ANC
equalizer
Xiaomi
Settings → Sound → Equalizer
Jabra
For Jabra Evolve models (e.g. Evolve2 65), it is important to adjust the usage mode:
- 🏢 Office mode: optimized for calls (enhanced noise reduction).
- 🎵 Music Mode: Improves dynamic range for listening to tracks.
💡
If your headphones stopped connecting after the MIUI update, try rolling back the Bluetooth stack version. To do this, in the developer settings (Settings → Additional → For Developers), turn on the option “Disable AVRCP 1.6” and restart the device.
6. Optimizing Jabra on Xiaomi for gaming and calling
For gamers and those who call often, standard settings may not be appropriate. Here's how to maximize performance:
6.1. setting up for games (low latency)
Sound delay is critical in shooters or racing, to reduce lag:
- 🎮 Enable Game Mode in Jabra Sound Settings+ (Available for Elite 7 Pro and later).
- 🔗 Select the aptX Low Latency audio codec (if supported by your Jabra model and smartphone).
- 📶 Turn off Wi-Fi while playing – this will reduce interference to Bluetooth.
On Xiaomi smartphones with a Snapdragon 8 Gen 2 processor (for example, Xiaomi 13 Ultra), the delay when using aptX is only 40-60 ms – this is comparable to wired headphones.
Setting up for calls (clearness of voice)
To improve the quality of calls:
- 📞 Jabra Sound.+ Activate the "Echo Suppression" and "Voice Enhancement" option".
- 🔇 Use only one headphone (Mono mode) – this improves the focus of the microphone.
- 📶 In the mobile network settings on Xiaomi, enable VoLTE (voice through) 4G) for a more stable connection.
After reset, the headphones will automatically go into pairing mode. Connect them to Xiaomi as a new device.