How to connect Bluetooth headphones to the TV Xiaomi Mi TV: 3 proven ways

Wireless headphones have become an integral part of modern movie and TV viewing — they give freedom of movement, do not interfere with households and provide immersion in sound without unnecessary wires. However, connecting Bluetooth headphones to a Xiaomi Mi TV often raises questions among users. Unlike smartphones, where the pairing of devices is intuitive, TVs (especially budget models) can hide this feature in non-obvious menu sections.

In this article, we’ll look at all the ways you can connect, from standard pairing through settings to workarounds for models without a built-in Bluetooth module. You’ll learn how to check your headphones’ compatibility with Mi TV, what sound codes are supported, and what to do if the TV doesn’t see the device. And we’ve collected unique Bluetooth support data across generations of Xiaomi TV — this information is not duplicated in the official documentation, but critical for successful connectivity.

1. Compatibility Check: Does your Xiaomi Mi TV support Bluetooth?

Before you try to plug in your headphones, make sure your TV is physically equipped with a Bluetooth module. Unfortunately, not all Mi TV models have this feature - especially for the budget Mi TV 4A and Mi TV 4C series released before 2020.

Here’s how to determine if you have Bluetooth:

• 📺 On the model of the TV: all models of Mi TV 4S/5/5X/5 Pro, and Mi. TV Q1/Q2 And the newer ones have built-in Bluetooth. 4A The module is present only in modifications with the prefix Pro (for example, Mi). TV 4A Pro).
• 🔍 Through Settings: Go to Settings → Devices and accessories → Bluetooth. If there is no partition, there is no module.
• 📄 Documentation: check the specifications on the official Xiaomi website or in the instructions for TV (section "Wireless technologies»).

⚠️ Note: If your TV doesn’t support Bluetooth, but has a port USB 3.5 mm, you can use an external Bluetooth transmitter (for example, 1Mii B06 Plus or Avantek. APTX-LL). Read about this method in section 3.

2. Standard connection via TV menu (for Bluetooth models)

If your Xiaomi Mi TV is Bluetooth-enabled, follow this step-by-step instruction, which takes no more than 2-3 minutes to complete, but requires precise steps.

Turn Bluetooth headphones on in pairing mode (usually hold the power button for 5-10 seconds until the indicator flashes)

Make sure the headphones are charged (battery level > 30%)

Disconnect headphones from other devices (smartphone, laptop)

Check that the TV is connected to the Internet (to download drivers if required)-->

Next, perform the following actions:

1. Open the settings of the TV (button «⚙️» remote).
2. Go to Devices and Accessories → Bluetooth.
3. Activate the Bluetooth slider (if it is turned off).
4. In the list of available devices, select your headphones (model name will appear here).
5. Confirm the pairing on the TV and (if necessary) on headphones.

Once you've successfully connected to the Sound menu, you'll have the option to select the audio source, and you'll have your headphones installed there. If the sound isn't coming, check:

• 🔊 Loudness on headphones and TV (sometimes they are adjusted separately).
• 🎵 Sound format in Settings → Sound. → Exit format (select the option) PCM compatiblely).
• 🔄 Reconnect the headphones (sometimes re-pairing helps).

💡

If the TV doesn't find the headphones, try resetting them to factory settings, which usually requires holding the power button and one of the function keys (such as increasing volume) for 10-15 seconds, and the instructions for your model should be in the user manual.

3. Alternative ways of connecting (if Bluetooth is not available)

If your Xiaomi Mi TV doesn’t support Bluetooth, don’t despair – there are at least 3 workarounds. Each has its pros and cons, so choose based on your tasks.

Method 1: Bluetooth transmitter for TV (recommended)

The external adapter connects to the TV via a 3.5mm (audio output) or USB (if supported).

• 🎧 1Mii B06 Plus – Supports aptX Low Latency (minimum sound delay).
• 🎧 Avantek APTX-LL — Best for watching movies (delayed) < 40ms).
• 🎧 Creative BT-W5 — for audiophiles (support) 24-bit/96kHz).

How to connect:

1. Insert the transmitter into the TV's audio output (or USB-port if the model supports digital sound).
2. Transfer the transmitter to pairing mode (see the instructions for the device).
3. Activate the search for devices on headphones and connect them to the transmitter.
4. In the TV settings (Sound → Exit), select Audio output (3.5 mm) or USB.

Method 2: Connect via Smart TV Box (e.g. Xiaomi Mi Box)

If you have a Xiaomi Mi Box S or similar console (like the Nvidia Shield), you can connect your headphones to it and then stream audio from the TV via HDMI ARC or Optical, a method that is more complex but provides additional features (like Dolby Atmos support).

Method 3: Using TV as Bluetooth transmitter (backup)

Some Mi TV models (e.g., the Q2 2023) support reverse Bluetooth, where the TV itself becomes a transmitter for other devices.

1. Go to Settings → Additional → Developer Mode.
2. Activate the option to Enable Bluetooth HID.
3. Connect the headphones as usual, but select Audio Sink mode.

⚠️ Note: You may experience latency when using external transmitters, and to reduce this, choose adapters that support aptX Low Latency or LC3 (2023 models+ year-end).

4. Solving common connection problems

Even if you do everything according to the instructions, you can have problems.-5 mistakes and their solutions:

If the problem is not solved, try resetting your Bluetooth settings on your TV:

1. Open Settings → Devices and accessories → Bluetooth.
2. Press. ⋮ (three-point) → Reset the settings.
3. Restart the TV and repeat the pairing.

5. Sound optimization: settings for better quality

Putting your headphones on is only half the battle, so to make the sound clear and synchronous, you can set the following parameters:

• 🎛️ Sound format: In Settings → Sound. → Select the exit format PCM (Auto (if the headphones support aptX).
• 🔊 Equator: In the same section, activate Sound Mode → Custom and adjust frequencies to your preferences.
• 📶 Bluetooth range: If headphones are switched off at a distance, reduce the number of obstacles between them and the TV (walls, furniture, etc).
• 🔋 Energy Saving: Turn off Bluetooth Auto-Switching in Settings if Headphones Often Break Connection.

For the Mi TV Q2 and later, the Adaptive Sound feature is available, which automatically adjusts the volume of dialogs and effects.

1. Go to Settings → Sound → additionally.
2. Activate the adaptive sound slider.
3. Choose a movie or music profile depending on the content.

💡

For minimal audio delay, use the aptX Low Latency codec (if your headphones support it). Otherwise, choose SBC - it is less demanding for connection stability.

6. Connecting multiple devices (multipoint)

Some Xiaomi Mi TV models (starting with Q1 2021) support connecting two pairs of headphones at the same time, which is handy if you want to watch a movie together without interfering with each other.

1. Connect the first headphones in the standard way (see section 2).
2. Without turning them off, activate the pairing mode on the second pair of headphones.
3. In the Bluetooth menu of the TV, click Add the device and select the second pair.
4. In the sound settings (Settings → Sound → Out) select the option Both devices.

Please note the limitations:

• 🎧 Both pairs of headphones must support the same codec (e.g, SBC).
• 🔊 The volume will be the same for both devices (adjusted only on the TV).
• 📶 There may be interference if the headphones are too far apart.

⚠️ Warning: Multipoint may not work smoothly on firmware older than 2022. If the sound starts to interrupt, update the TV software or use an external Bluetooth transmitter with dual connectivity (for example, 1Mii B06 Pro).

7. firmware update: why it matters for Bluetooth

Many headphone connectivity issues are solved by software updates. Xiaomi regularly releases patches to fix Bluetooth bugs, especially in newer models. Here's how to check and install updates:

1. Open Settings → About TV → Update system.
2. Click Check for updates.
3. If a new version is available, click Download and Install.
4. Wait for the TV to restart (don’t turn off the power!).

After the update:

• 🔄 Reconnect the headphones (the old pair may not be determined due to changes in the Bluetooth stack).
• 🔍 Check the Settings section → Devices and accessories → Bluetooth → Additional options may be added (e.g. support) LE Audio in the latest firmware).

FAQ: Frequent questions about connecting Bluetooth headphones to Xiaomi Mi TV