Xiaomi Wireless Mouses are a popular accessory for work and gaming due to their combination of compactness, ergonomics and long battery life. However, connecting such devices via Bluetooth sometimes raises questions, especially for users who are first encountering wireless gadgets. In this article, we will examine not only the standard pairing procedure, but also the nuances for different operating systems, as well as typical errors that can occur in the process.
It’s important to understand that the connection algorithm may vary slightly depending on the mouse model (e.g. Xiaomi Mi Bluetooth Mouse 2, Xiaomi Mi Mouse Lite or Xiaomi Mi Portable Mouse) and the firmware version of the laptop. We’ll look at the universal steps that will work for most devices, and we’ll also give troubleshooting recommendations if the laptop “can’t see” the mouse or the connection is constantly breaking down.
If you've tried to plug in a mouse before, but you haven't succeeded, don't rush it back to the store. 90 percent of the time, it's solved by simple actions that many users don't know about. For example, the Xiaomi Mi Bluetooth Mouse 2 requires holding the power button for 5 seconds to go into pairing mode, rather than a short tap, which is often the key to a successful connection.
1.Preparing Xiaomi mouse to connect
Before you start pairing, make sure the mouse is ready to go. Most Xiaomi models come in sleep mode to save battery power.
- 🔋 Charge the mouse (if the model has a battery) or insert the batteries (for options on the battery). AA/AAA). Xiaomi mice are usually equipped with cable USB-C or Micro-USB for charging.
- 🖱️ Activate the mouse: move the slider on the bottom panel to the position ON (In some models, the power button is hidden under the cover of the battery compartment).
- 🔄 Put it in pairing mode: hold the on button (or a special Pair button) for 3-5 seconds until the indicator starts to blink at intervals. ~1 time per second.
The Xiaomi Mi Bluetooth Mouse 2 and Xiaomi Mi Portable Mouse have a light on the top panel and it glows blue in pairing mode. If the LED is on or doesn't blink at all, the mouse is either already connected to another device or discharged. In the first case, you need to reset the pairing (we'll talk about this below).
⚠️ Note: Some Xiaomi mice (e.g., Xiaomi Mi Mouse Lite) automatically go to sleep after 10 minutes of inactivity.If the indicator is gone, press any button to wake the device, and try pairing again.
2. Checking the compatibility of the laptop
Before you plug in your mouse, make sure your laptop supports Bluetooth of the right version. Xiaomi mice usually run Bluetooth 4.0 and higher, but Bluetooth 5.0 is recommended for stable performance (especially in games or graphics editors).
How to check the Bluetooth version on your laptop:
- 🪟 Windows: Open Device Manager → deploy the Bluetooth branch → Find an adapter (for example, Intel Wireless Bluetooth) → right-click → Properties → tab Additional.
- 🍎 macOS: Click on the Apple logo → About the Mac. → System report → Bluetooth.
- 🐧 Linux: Enter the command at the terminal: hciconfig -a | grep "Version"
If your laptop is equipped with Bluetooth 3.0 or lower, the Xiaomi mouse can connect, but with delays or accidental shutdowns.In this case, consider buying a Bluetooth adapter (for example, the TP-Link UB500), which connects via USB-A and supports Bluetooth 5.0.
| Mouse model | Minimum version of Bluetooth | Recommended version | Support for multidisciplinary connectivity |
|---|---|---|---|
| Xiaomi Mi Bluetooth Mouse 2 | 4.0 | 5.0 | Yes (up to 2 devices) |
| Xiaomi Mi Portable Mouse | 4.0 | 4.2 | No. |
| Xiaomi Mi Mouse Lite | 3.0 | 4.0 | No. |
| Xiaomi Mi Silent Mouse | 4.0 | 5.0 | Yes (up to 3 devices) |
3. Connect to a laptop on Windows 10/11
Instructions for most Windows laptops (Lenovo, HP, ASUS, Acer, etc.) If you have a Xiaomi Mi Notebook, the algorithm will be similar.
- Activate Bluetooth: Press Win + A to open Notification Center. Find a Bluetooth tile and click on it (should be illuminated in blue). If there is no tile, go to Settings → Devices → Bluetooth and other devices and turn on the slider.
- Add a new device: In the same Bluetooth and other devices section, click Bluetooth Addition or another device. select Bluetooth (first item). In the list, find your Xiaomi mouse (usually displayed as Mi Bluetooth Mouse or MI_MOUSE_XXX).
Confirm the conjugation:
- Click on the mouse name and wait until the process is complete (it can take up to 30 seconds).
- If you have a request for input PIN-* code - try 0000 or 1234 (most Xiaomi models don't require code).
If the mouse connects, but the cursor moves in jerks, try:
- 🔄 Disable Handoff function in System settings → Mainstream → AirDrop and Handoff.
- 📡 Move the mouse closer to the laptop (optimum distance - up to 1 meter).
- 🔋 Check the mouse charge level (in System settings) → Bluetooth next to the device name shows battery percentage).