Connecting Jabra Headset to Xiaomi Smartphone: A Complete Guide to Problem Solutions

Jabra’s wireless headsets have long earned a reputation for reliable devices for calling and listening to music, but connecting to Xiaomi smartphones sometimes raises questions among users. Even if you’ve previously successfully connected other Bluetooth devices to your phone, the brand’s headsets may require a special approach — especially models that support multipoint (simultaneously connecting to two devices) or specialized office solutions in the Evolve series.

In this article, we’ll look at not only the standard pairing procedure, but also nuances that are often overlooked in general instructions, such as why the Jabra Elite 75t might not appear in the list of available devices on the Xiaomi Redmi Note 12, how to reset your headset before connecting, and what to do if the sound is interrupted after connecting, and you’ll find a table of compatibility of popular Jabra models with MIUI firmware and answers to frequent questions on microphone setup and call management.

If you have already tried to connect the headset and faced an error such as “failed to connect” or “device not found”, do not rush to blame the technique – in 80% of cases, the problem is solved by simple actions, which we will describe below.

1. Preparing the Jabra headset for connection

Before you pair a Jabra with a Xiaomi phone, make sure the headset is ready to pair. Many users miss this step, which simply doesn't appear on the list of available Bluetooth devices.

For most Jabra models (such as Elite 4 Active, Talk 45 or Evolve 20), the pairing activation process looks like this:

• 🔋 Charge the headset to at least 30%.The discharged device may not turn on or off during connection.
• 🔄 Turn off and turn on the headset again if it has already been used. To do this, hold the power button 5-7 seconds before the beep.
• 🎧 Activate pairing mode: For headphones (Elite, Live series): hold the Bluetooth button (or touchpad) until the blue and red lights flash. For mono headsets (Talk, Evolve series): hold the call button until the voice message "Pairing mode".
• 📱 Disconnect the headset from other devices (if it was previously connected). For example, in Windows or MacOS, remove it from the list of Bluetooth devices to avoid conflicts.

If your Jabra model is equipped with a USB-C wired connector (like the Evolve 2 85), you can first connect it to your phone with a cable, and then switch to Bluetooth pairing mode via the Jabra Sound+ app.

⚠️ Note: Some Jabra models (like Elite 10) support Google’s Fast Pair, but only on Android 10 phones+. On Xiaomi MIUI 12 and older this function is unstable – it is better to use standard pairing.

2. Step-by-step instruction: Bluetooth connection to Xiaomi

Now, let’s get to the connection process itself. The instructions are suitable for all Xiaomi, Redmi and POCO smartphones based on MIUI 11-14 (including Android 13/14). If you have an older version of the firmware, update it through Settings → About Phone → System Update.

Follow this algorithm:

1. Open Bluetooth settings on Xiaomi: Swipe down from the top edge of the screen to open the notification bar. Press and hold the Bluetooth icon (or go to Settings → Connection and Sharing → Bluetooth).
2. Activate Bluetooth: Switch the slider to the On position. Make sure that Visibility for All mode is on (some MIUI firmware calls this Detection).
3. Find the Jabra headset in the list: Wait for your model name to appear in the Available Devices section (e.g. Jabra Elite 5). If the device doesn't show, click Update (circle arrow icon in the upper right corner).

Connect to the headset:

• Slip the name of the device on the list.
• Confirm pairing if you receive a request for “Connect” or “Allow access to contacts” (this is necessary for the microphone to work correctly during calls).

After successful connection next to the headset name will appear the inscription "Connected", and in the headphones or headset dynamics will sound voice confirmation (for example, "Connected to Xiaomi"). If there is no sound, check the volume level on the phone and the headset itself.

Headset charged at least 30% |

Coupling mode activated (blue/red indicator flashes)|

Bluetooth on Xiaomi is enabled and the phone is visible for other devices |

Headset disconnected from other gadgets (PC, tablet, etc.)|

The distance between the phone and the headset is not more than 1 meter-->

⚠️ Note: Some Xiaomi models (e.g. Mi 11 or Redmi) K50) When you connect the Jabra headset, you can automatically activate Call and Media mode. If you need to use the headset for music only, go to its settings on your phone and turn off the "Use for Calls" option".

3. Customization of sound and microphone after connection

Successful pairing is only half the battle. To make the Jabra headset work on Xiaomi without any complaints, you need to adjust the sound and microphone settings, which is especially important for office models (for example, the Evolve 2 65), where voice quality is critical.

Here are the key settings worth checking out:

• 🎵 Sound quality: Go to Settings → Sound. → Bluetooth sound quality. Select "High quality (AAC)" or "SBC" (if AAC not available. AptX codecs or LDAC Not all Jabra models are supported.
• 🎤 Microphone for calls: In Settings → Annexes → Permits → Make sure the microphone is allowed for Phone and Contact applications. 85h) Enable the "Noise Canceling" option in the Jabra Sound app+.
• 🔊 Volume: Adjust the volume separately for Media and Calls in the sound settings. If the sound is too quiet, check if Safe Volume is activated in the sound settings. MIUI.

For fine-tuning, we recommend installing the official Jabra Sound+ app from Google Play.

• Update the firmware of the headset.
• Customize the equalizer for different genres of music.
• Activate Through Mode (transparent sound) for office models.

💡

If the sound in Jabra headphones is interrupted after connecting, try turning off the option "Absolute Volume" in Settings → System → Developer → Network → Bluetooth Audio Codec. To do this, first activate the developer mode (7 times click on the Build Number in Settings → About phone).

4. Solving common connection problems

Even if you follow instructions correctly, Xiaomi users sometimes encounter errors. Consider typical scenarios and ways to fix them.

4.1 Phone doesn't see Jabra headset

If Jabra doesn’t appear in the list of available devices, follow these steps:

• 🔄 Reboot both devices: Turn off the headset and phone, then turn them on again.
• 📱 Clear the Bluetooth cache on Xiaomi: Go to Settings → Annexes → Application management. Find "Bluetooth" in the list of system applications. Click "Clear cache" and "Erase data".

Reset the headset settings:

Jabra

red-indicator

Check the compatibility:

Jabra

Talk 25

Bluetooth 5.0+

Xiaomi

Bluetooth 4.0 adapter

4.2 Headset plugs in, but no sound

If the connection is established but the sound is not reproduced:

• 🔊 Check the sound source: When you play music or call, swipe down the notification bar and make sure that the output device is Jabra, not the phone speaker.
• 🎵 Change your Bluetooth profile: Go to Settings → Connection and sharing → - Bluetooth, hit the icon. ⚙️ Turn off the "Use for Media" option, then turn it on again.
• 📱 Update the firmware of the headset: use the Jabra Sound app+ check out.

Sound interruptions or poor communication quality

If the sound is lost, it appears, or there is interference:

• 📶 Reduce distance: The maximum stable distance for Bluetooth is 10 meters, but walls and obstacles reduce this figure to 3-5 meters.
• 🔋 Check the charge of the headset: at a level below 20%, failures may occur.
• 🛜 Disable other Bluetooth devices: If a fitness bracelet or wireless speakers are connected to the phone, they can cause interference.
• 🔄 Change the codec: in the settings MIUI choose SBC instead AAC (Although the sound quality will be worse, the communication will become more stable).