How to connect wireless headphones to Xiaomi Redmi 8 Pro: instructions with pictures and tips

Xiaomi Redmi 8 Pro is still popular smartphone due to balanced performance and reliable performance, but even experienced users sometimes have difficulty connecting wireless headphones — especially if it is the first setup or custom models. In this article, we will discuss all the ways of pairing, including hidden nuances that the manufacturer does not always mention in the official instructions.

You'll learn how to connect headphones through the standard Bluetooth menu, what to do if the device is not located, and how to reset the pairing settings if the headphones have previously been connected to another phone, and the compatibility table of popular headphone models with the Redmi 8 Pro and answers to frequent questions that arise after connecting.

1. Preparation of headphones and phone before connection

Before you start pairing, make sure both devices are ready to go, which will eliminate 80% of the common errors associated with incorrect detection or lack of sound after connecting.

For Xiaomi Redmi 8 Pro, check out:

• 🔋 Battery charge - if the level is below 15%, the phone can automatically turn off Bluetooth to save power%.
• 📱 Version. MIUI — obsolete firmware (below) MIUI 12) may not support modern audio codecs (e.g., aptX or LDAC). Update the software to Settings → The phone. → Updating the system.
• 🎧 Flight mode -- it shuts down all wireless modules, including Bluetooth. Make sure the function is deactivated.

For wireless headphones:

• 🔋 Battery charge – the discharged headphones will not appear in the list of available devices. Most models require at least 5% charge to enable pairing mode.
• 🔄 Resetting – if the headphones have previously connected to another device, they may need to be reset (instructions below in Section 4).
• 📦 Set – some headphones (e.g. Xiaomi AirDots) require removal from the charging case to activate the search mode.

2. Standard connection via Bluetooth menu

This is a basic method that works for 95% of headphone models. Follow the instructions Step-by-step:

1. Open Settings on Redmi 8 Pro and select Connect and Sharing (or Bluetooth, depending on version) MIUI).
2. Activate the Bluetooth switch, it's going to turn blue, and the phone will start scanning the available devices.
3. Turn on the pairing mode on the headphones: 🎧 For Xiaomi AirDots: Hold the button on the case for 3 seconds until the indicator starts flashing white. 🎧 For Sony. WH-1000XM: Press the power button for 7 seconds until you hear a voice message. 🎧 For JBL Tune: Press Volume buttons and hold for 5 seconds.

In the list of found devices on the phone will appear the name of your headphones (for example, Mi True Wireless or the name of the headphone). LE_WH-1000XM4). Put it on him.

Confirm pairing if a request appears on the screen (sometimes you need to enter) PIN-code - default is 0000 or 1234).

If the headphones don’t appear on the list, try:

• 🔄 Reboot the phone’s Bluetooth module: turn it off and turn it back on in the settings.
• 📱 Remove old connected devices (if there are too many, the phone may not see new ones).
• 🎧 Update the firmware of headphones (relevant for Sony and Bose – check in the manufacturer’s app).

💡

If the headphones are connected but no sound, check the audio output settings: go to Settings → Sound. → Output sound and select your headphones manually.

3. Alternative ways of connecting

If the standard method didn't work, try one of these options, which are especially useful for headphones with non-standard protocols (e.g. Bluetooth 5.2). LE Audio) or devices requiring special applications.

Method 1: Through the manufacturer's application

Some brands (such as Sony or Bose) require the installation of proprietary software to work properly. Download the official app from Google Play:

• 🎧 Sony Headphone Connect for models WH-1000XM, WF-1000XM.
• 🎧 JBL Headphones for headphones for the series Tune, Live, Reflect.
• 🎧 Mi Home – for Xiaomi AirDots (allows you to customize gestures and equalizer).

After installation, launch the application and follow the instructions on the screen – usually it finds the headphones and suggests connecting.

Method 2: Through the Developer Mode

If the headphones use a rare codec (for example, LDAC or LC3), You might need to manually turn it on:

1. Activate Developer Mode: Go to Settings → About Phone and tap on MIUI Version 7 times.
2. Return to the main settings menu, open Additional settings → Developer settings.
3. Find Bluetooth Audio Codec and select the desired codec (e.g. aptX). HD high-quality).
4. Reboot the phone and reconnect.

Method 3: Connecting over NFC (if supported)

Some headphones (such as Sony) WH-1000XM4 Bose QuietComfort 45 supports fast connection via NFC. For that:

1. Make sure that NFC enabled on the phone (Settings) → Connections and sharing → NFC).
2. Apply headphones to the top of the Redmi 8 Pro (where it is located) NFC-chip – usually the back cover next to the camera.
3. Wait for the vibration or sound signal – the phone will automatically go to the Bluetooth menu and offer to connect.

4. Reset Bluetooth settings on headphones

If the headphones were previously connected to another device and now do not want to mate with the Redmi 8 Pro, they must be reset to the factory settings.

Important: After reset, the headphones will lose all stored connection profiles, including data about previous devices and equalizer settings.

💡

If the headphones don’t reset in the standard way, check their charge – discharged devices may ignore reset commands.

5. Solving common problems

Even after a successful connection, there may be problems, and here are the most common ones and how to fix them:

Problem 1: Headphones are connected, but there is no sound

Causes and solutions:

• 🔊 The wrong sound source: in Settings → Sound. → Select your headphones manually.
• 🎵 Media audio disabled: in the Bluetooth menu, tap the gear icon next to the headphones and turn on the Media audio option.
• 🔋 Low headphone charge: Some models (such as AirPods) automatically turn off sound when the charge level is below 10%.

Problem 2: Constant communication breakdowns

What to check:

• 📶 Interference from other devices: Turn off nearby Wi-Fi routers (especially at 2.4GHz), microwave ovens or other Bluetooth devices.
• 📱 Bluetooth version: Redmi 8 Pro supports Bluetooth 5.0, but some headphones (such as those with Bluetooth 5.2) may not work smoothly.
• 🔄 Automatic Reconnect: In headphone settings (if any), disable the Auto-reconnect option – it sometimes conflicts with the headphones. MIUI.

💡

For a stable connection, keep your headphones and phone at a distance of no more than 10 meters without obstacles (walls, furniture degrade the signal).

Problem 3: The headphones are connected as "phone audio" rather than "media audio"

This means that headphones are defined only as a headset for calls, not as a full-fledged audio device.

1. Open Settings → Connections → Bluetooth.
2. Put the gear icon next to your headphones.
3. Enable the Media Audio option (or A2DP).
4. If you do not have an option, reset your headphone settings (section 4) and reconnect.

⚠️ Note: If the headphones are only connected as "Phone Audio", check their compatibility with the phone. MIUI. Some models (such as Pixel Buds) are optimized for Android One and may not work properly.

6.Sound optimization after connection

After successful pairing, you can improve the sound quality with the help of built-in tools MIUI and third-party applications.

Equalizer setting

The Redmi 8 Pro has a built-in equalizer:

1. Go to Settings → Sound → Equalizer.
2. Select a profile (like Bass, Rock or Pop) or set up sliders manually.
3. Activate the option to Apply to Bluetooth.

Use of high quality codecs

If your headphones support AptX or LDAC, turn them on:

1. Activate the developer mode (instruction in section 3).
2. Go to the Developer Options → Bluetooth Audio Codec.
3. Choose aptX. HD or LDAC (if available).
4. Reconnect the headphones.

Third-party applications can be used to fine-tune the sound:

• 🎛️ Wavelet - Supports LDAC, aptX and manual equalizer setting.
• 🎛️ Poweramp – has a built-in 10-band equalizer and support for Hi-Res Audio.
• 🎛️ ViPER4Android — Advanced users (requires root or Magisk).

⚠️ Attention: use of codecs LDAC or HD Increases headphone battery consumption by 15 to 20 percent. If your model is rapidly discharged, go back to the headphones. AAC or SBC.

7. headphone compatibility with Xiaomi Redmi 8 Pro

Not all wireless headphones work equally well with the Redmi 8 Pro. Below is the compatibility table of popular models:

If your model is not in the table, check the specifications on the manufacturer's website.

• 📋 Supported codecs (AAC, aptX, SBC).
• 📡 Bluetooth version (optimally 4.2 and higher).
• 🔋 Profile – Headphones should support A2DP (for music, and HFP (call-in).

8. Frequent questions and answers