How to connect wireless headphones to Xiaomi Redmi Note 10: all ways and solutions to problems

Wireless headphones have become an integral part of everyday life — they are convenient for listening to music, calling and even watching videos. Owners of the Xiaomi Redmi Note 10 often face the question of how to connect Bluetooth headphones to this smartphone, especially if you used to use wired models. Unlike older devices, where you just need to insert a plug, you need to follow several steps to pair gadgets.

While the connection process seems simple, in practice, users face nuances ranging from lack of sound to trouble finding a device. In this article, we will not only break down the basic instructions, but also look at the unique features of connecting Xiaomi headphones (such as AirDots) to the Redmi Note 10, as well as solving typical errors. If your headphones have already been paired with another phone, don’t worry, we will tell you how to reset them.

Before you start, make sure your headphones are charged (the indicator should flash or burn green) and your smartphone has Bluetooth on. If you use Xiaomi AirDots or Redmi Buds headphones, check the firmware version - some models require an update through the Mi Home app.

1.Preparation for connection: compatibility and charging check

Before pairing, make sure your headphones are compatible with the Redmi Note 10. Most current models support the Bluetooth 5.0 protocol used in this smartphone. However, older devices (such as headphones before 2018 release) may be delayed or not connected at all.

Check the headphone charge:

• 🔋 Indicator on the body: if it flashes red - charging is required, green / white - ready to work.
• 📦 Charging case: for Xiaomi AirDots and similar models, headphones begin to look for the device only after extraction from the case.
• 🔌 Smartphone power: If Redmi Note 10 battery is below 15%, Bluetooth can shut down to save power.

Also note the power saving mode in the phone settings. If it is activated, the connection may be interrupted. To turn it off, go to Settings → Battery and Performance → Power saving mode and deactivate the option.

💡

If the headphones don’t respond to the on button, try resetting them by holding the power button for 10-15 seconds until the indicator flashes twice.

2. Basic method: Connect via Bluetooth menu

This is a standard method that works for 90% of wireless headphones.

1. Open Settings on Redmi Note 10.
2. Go to Connections and Sharing → Bluetooth.
3. Activate the Bluetooth slider (if it is turned off).
4. Click Device Search (or Add a new device).
5. Turn on the pairing mode on the headphones (usually hold the power button for 3-5 seconds until the indicator starts flashing quickly).
6. In the list of found devices, select the name of your headphones (for example, Redmi Buds 3 or AirPods Pro).
7. Confirm the connection if a pairing request appears.

Once successfully connected, the Bluetooth menu will have Connected status, and the headphones will automatically connect to the phone when turned on (unless paired with another device).

3. Features of Xiaomi headphones connection (AirDots, Redmi Buds)

Xiaomi’s headphones have several unique features that make pairing with the Redmi Note 10 easier:

• 🔗 Automatic connection: After the first pairing, the headphones will connect to the phone immediately after being removed from the case (if Bluetooth is on).
• 🎧 Double tap: For AirDots Pro 2 and later, double tap on the earpiece allows you to switch tracks or call a voice assistant.
• 📱 Mi Home app: Some features (such as firmware updates or equalizer setup) are only available through the official app.

If your Xiaomi headphones aren’t defined by your phone, try resetting them:

1. Put both earbuds in the case.
2. Hold the button on the case for 15-20 seconds until the indicator flashes red and white.
3. Remove the headphones - they will go into pairing mode.

4. Problem Solving: Headphones don't plug in or no sound

If the connection fails, check the following points:

If the problem persists, try resetting the network settings on your phone:

1. Go to Settings → System and device → Resetting.
2. Select Network Settings Reset (does not delete personal data!).
3. After restarting, reconnect the headphones.

💡

If the headphones were previously connected to another phone, they can automatically connect to it. To avoid this, remove them from the list of paired devices on the old smartphone.

5. Connect via the fast panel (for power users)

If you often connect and disable headphones, it is more convenient to use the Quick Settings Panel:

1. Swipe your finger down from the top of the screen to open the notification bar.
2. Find the Bluetooth icon (if it is not, click on the pencil icon and add it to the panel).
3. Hold your finger on the Bluetooth icon for 1-2 seconds and the menu of the paired devices will open.
4. Click Add Device and follow the standard connection procedure.

This method saves time because it doesn't require you to go into settings. However, keep in mind that the quick bar only displays the latest connected devices. If the headphones don't appear on the list, use the full Bluetooth menu.

💡

To speed up the connection, enable Visibility for all devices in Bluetooth settings (temporary measure, turn off after pairing).

6. Connect headphones to the Redmi Note 10 through the manufacturer's apps

Some brands (such as Sony, JBL, Xiaomi) offer proprietary headphone management apps that not only connect devices, but also configure the equalizer, update the firmware or activate additional features.

For Xiaomi headphones:

• 📱 Install the Mi Home app from Google Play.
• 🔍 Sign up or sign in to your Xiaomi account.
• 🎧 In the Devices section, click Add Device and select your headphone model.
• 🔗 Follow the instructions on the screen to pair.

For headphones from other brands (such as Sony WH-1000XM4 or JBL Free X), use the official apps:

• Sony: Headphones Connect
• JBL: JBL Portable
• Samsung: Galaxy Wearable

7. How to disable or remove headphones from the list of devices

If you no longer plan to use headphones or want to connect them to another device, remove them from the list of conjugated gadgets:

1. Open Settings → Connections and Sharing → Bluetooth.
2. Find your headphones in the list and click on the icon ⚙️ (junction.
3. Choose Disable (Temporary Disconnection) or Forget Device (Full Deletion).

Once removed, the headphones will be reset in the Redmi Note 10 settings and can be reconnected (for example, if you transfer them to another person).

⚠️ Note: If you remove the headphones from the list and then try to connect them to another phone, they can automatically connect to the Redmi Note 10 the next time you turn on. To avoid this, reset the headphone settings (see the instructions for your model).

8 Additional settings: improving sound quality

After connecting the headphones, you can optimize the sound:

• 🎛️ Equator: in the Mi Music app or Google Play Music, adjust the frequencies to your preferences.
• 🔊 Bluetooth Codecs: in the Developer Settings (Settings) → The phone. → Version. MIUI — Press 7 times) select Bluetooth audio codec and install AAC or aptX for better quality.
• 🎵 Mono/stereo: If the sound is only in one headphone, check the Bluetooth menu to see what Stereo is choosing, not Phone Mode.

For Redmi Buds 3 Pro and later, the spatial sound function is available to activate it:

1. Open the settings → Sound → Sound effects.
2. Select Spatial Sound and turn on the option.

💡

AptX and LDAC codecs provide better sound quality, but can increase latency. Select AAC or SBC for games.

Frequently asked questions