Wireless headphones have become an integral part of everyday life – they are convenient for working, listening to music or watching movies without extra wires. Xiaomi laptops (Mi Notebook series, RedmiBook, Xiaomi Book) support the connection of Bluetooth devices, including Bluetooth devices. TWS-Headphones from Xiaomi itself (AirDots, Redmi Buds, FlipBuds) and third-party brands, but users often face problems: the device does not find headphones, the sound is interrupted or there is no communication at all.
In this article, we will discuss all the ways of connecting, from standard pairing via Bluetooth to solving problems with drivers and audio settings. 11/10 And Linux, which can affect the stability of the connection. TWS-headphones or encountered an error "Can not connect the device" - here you will find a solution.
1. Preparation of headphones and laptop to connect
Before pairing, make sure both devices are ready to communicate. Headphones should be charged (the indicator on the case charger usually burns white or green when the charge level is sufficient), and the laptop should have a Bluetooth module on.
For Xiaomi AirDots (including Pro 2/3, SE) and Redmi Buds (including 3 Lite, 4 Active), the pairing activation process is the same:
- 🔋 Take the headphones out of the case - they will automatically turn on.
- 🎧 Press and hold the touch button on both headphones for 5-7 seconds until the lights start flashing red and white (or only white for new models).
- 📱 Make sure the headphones emit an audible signal (usually a voice message "Pairing" or a melody).
On a Xiaomi laptop, check out:
- 💻 Bluetooth enabled – the icon in the taskbar (or in the Notification Center) should be active.
- 🔄 Update drivers – go to Device Manager → Bluetooth and check for exclamation marks.
- 🚫 Disable other Bluetooth devices (mouse, keyboard) that may interfere.
💡
If the headphones don’t blink, try resetting them to factory settings: place both headphones in the case, then press and hold the button on the case for 10-15 seconds until the LED flashes red.
2. Standard Bluetooth connection on Windows
Most Xiaomi laptops run Windows 10/11, where the connection process is unified.
- Open Settings → Devices → Bluetooth and other devices.
- Activate the Bluetooth slider (if it is turned off).
- Click Add Add the device → Bluetooth.
- In the list, find your headphones (such as Mi True Wireless Earphones 2 or Redmi Buds 3 Pro) and select them.
- Confirm the pairing - on the headphones may require additional pressing of the button.
When you successfully connect, the list of devices will show "Voice, music connected." If instead you see "Voice only connected," then the laptop uses the headphones as a headset for calling, not for playing media.
- 🔊 Go to the control panel. → Sound.
- On the Play tab, find your headphones, right-click and select Use by default.
3. Features of connection on Linux (Ubuntu, Manjaro)
Xiaomi laptops often come with Windows pre-installed, but some users are switching to Linux. In Ubuntu or Arch-based distributions (such as Manjaro), the pairing process may differ due to the bluez (Bluetooth stack) features.
Instructions for Ubuntu 22.04 LTS and later:
- Open Settings → Bluetooth.
- Make sure the adapter is on (button in the upper right corner).
- Click Add Device and select headphones from the list.
- On request. PIN-Leave the field empty (for most people) TWS-No headphones required).
If the headphones are connected but there is no sound:
- 🐧 Install pulseaudio-module-bluetooth: sudo apt install pulseaudio-module-bluetooth
- Re-start the service: pulseaudio -k && pulseaudio --start
- In pavucontrol (set via sudo apt install pavucontrol) in the Configuration tab, select the A2DP Sink profile for headphones.
What if Linux can’t see the headphones?
4. Solving Connection Problems
If the headphones don’t connect or the connection is constantly breaking, check the following points:
| Problem. | Possible cause | Decision |
|---|---|---|
| The laptop can't find the headphones | Headphones are not in pairing mode or Bluetooth is turned off on a laptop | Reboot the headphones (put them back in the case and get them back out again), check if Bluetooth is turned on in the Notification Center |
| The connection is interrupted every 5-10 seconds | Conflict with other Bluetooth devices or outdated drivers | Disable other devices, update the Bluetooth driver through Device Manager |
| The sound only goes into one headphone. | The headphones are not synchronized with each other. | Reset your headphones to factory settings (see instructions for your model) |
| The laptop sees the headphones, but does not connect | Bluetooth profile problem (for example, no A2DP support) | Remove the device from the list of conjugates and reconnect |
For Xiaomi laptops with Intel module AX200/AX201/AX210 There is a problem with communication breakage when using TWS-Headphones, the solution:
- Download the latest drivers from the official Intel website (wireless adapters section).
- Remove the current driver through Device Manager (right click on the device → Delete the device).
- Install the downloaded driver and restart the laptop.
☑️ Diagnosing Bluetooth problems
5. Customization of sound for optimal quality
After connecting the headphones, you may need to adjust the sound further, especially if you hear delays (lag) or interference.
- 🎵 Go to the control panel. → Sound. → The properties of your headphones.
- On the tab, additionally select the 2 channel format, 16 bits, 44100 Hz (CD-quality).
- Turn off all sound effects (such as sound enhancement or spatial sound).
Xiaomi AirDots Pro 2 and Redmi Buds 3 Pro have branded settings available via the Mi Home app (smartphone only).However, on a laptop, you can use uniform sound (EQ) through third-party programs:
- 🎧 Equalizer APO + Peace GUI — free-to-play.
- 🎛️ FXSound – a simple sound amplifier with pre-presets.
If you hear a hiss or crackle, try:
- Turn off Wi-Fi (sometimes it interferes at 2.4 GHz, like Bluetooth).
- Move the laptop and headphones closer to each other (optimal distance - up to 1 meter).
💡
For minimal audio delays (such as watching videos), choose the aptX Low Latency or AAC codec in Bluetooth settings. Xiaomi laptops on the Intel AX200+ support these codecs by default.
6. Connecting headphones to a Xiaomi laptop on macOS (if installed)
Some users install macOS on Xiaomi laptops (for example, via Hackintosh). TWS-Headphones may be accompanied by problems due to the lack of native drivers for Bluetooth chips Intel.
Instructions for macOS Monterey/Ventura:
- Make sure that the system has a patch for Intel Bluetooth (e.g., IntelBluetoothFirmware and BlueToolFixup via OpenCore).
- Open System settings → Bluetooth.
- Click Connect next to the headphone name.
- If there's no sound, in audio.-MIDI-settings (Programs) → Utilities) select headphones as the output device.
Frequent problems on Hackintosh:
- 🚫 Bluetooth not enabled – check if USBPorts.kext patch is added for your USB-controller.
- 🔊 The sound is interrupted – turn off Wi-Fi or use it USB Bluetooth adapter (for example, BCM94360).
💡
For stable Bluetooth performance on the Hackintosh, it is recommended to use an external adapter on a Broadcom chip (for example, the Fenvi T919). It supports all macOS features, including Continuity and AirDrop.
7. Alternative ways to connect (if Bluetooth does not work)
If the Bluetooth module on the Xiaomi laptop broke down or there is no driver, you can connect TWS-headphones:
- 🔌 Through USB Bluetooth adapter: connect an external adapter (for example, TP-Link) UB400 Asus USB-BT400) and repeat the pairing.
- 📱 Through the smartphone as an intermediary: connect the headphones to the phone, and the phone to the laptop via Bluetooth (in the mode "Sound Transmission").
- 🎵 Over 3.5mm audio cable: If your headphones support wired connectivity (e.g. Xiaomi FlipBuds Pro), use an adapter USB-C → 3.5 mm.
To connect via USB Bluetooth adapter:
- Connect the adapter to the laptop.
- Install drivers (usually they are installed automatically).
- Activate the pairing mode on the headphones and connect them through the Settings → Devices.