Connecting headphones JBL Xiaomi Redmi via Bluetooth: full instruction with error solutions

Wireless headphones JBL Xiaomi Redmi is a popular mix among users who value sound quality and functionality at an affordable price, but even with such devices, the pairing process via Bluetooth sometimes raises questions: Why the phone can't see the headphones, how to reset, or what to do if the sound is interrupted. This article will help you understand everything from basic connection to solving rare errors.

We will consider not only the standard connection procedure, but also the unique features of interaction. JBL firmware MIUI There are different versions that are often overlooked in the general instructions, such as why some Redmi Note 12 models require additional confirmation from the Nearby Devices menu, or how to get around the limit on the number of connected gadgets in Redmi. 10C. If you have tried to connect devices and faced a problem, here you will find specific solutions, not template tips.

Before you start, make sure your headphones are in place. JBL charged (the indicator should flash or burn white/blue), and on the Xiaomi Redmi phone Bluetooth is turned on and on the "In the plane" mode is turned off.

1. Preparation of devices for connection

The first step is to check compatibility and basic settings. JBL (from Tune 120TWS Live Pro 2 supports Bluetooth 5.0+, This ensures a stable connection with Xiaomi Redmi (starting with Redmi 9 and later).However, even if your phone is older, there will be no problems - the headphones are backward compatible with Bluetooth 4.2.

On the phone, open Settings. → Connections and sharing → Bluetooth and make sure the switch is active. If you've previously connected other devices, it's recommended that you clear the Bluetooth cache (more on this in the Settings Reset section). JBL check:

• 🔋 Battery charge: indicator should flash white/blue (when discharged - red). Connect to charge for 10 minutes if the LED does not respond.
• 🔄 Pairing mode: For most models, hold the power button for 5-7 seconds until you hear a voice message "Pairing" or see a flashing blue-red light.
• 📱 Compatibility of profiles: JBL profiles A2DP (for music, and HFP (for calls. MIUI they are turned on automatically, but custom firmware may require manual adjustment.

Special attention to owners JBL TWS (For example, Wave Beam or Reflect Flow Pro: before connecting, take both earbuds out of the case and wait for them to sync with each other (the indicators on both should flash the same). If one of the headphones does not respond, reset them by holding the button on the case for 10 seconds.

💡

On the Xiaomi Redmi models with MIUI 14+ Turn on the "Fast Connection" option in your Bluetooth settings, which will speed up device search. JBL 40%

2. Step-by-step instruction for pairing

Now, to the actual connection process, on a Xiaomi Redmi phone, do the following:

1. Open the Settings. → Bluetooth (or swipe down and hold the Bluetooth icon in the notification panel).
2. Click "Search for devices" (in) MIUI 13 and the newer button is called "Add device").
3. In the list, find the name of your headphones. JBL (for example, JBL Tune 510BT or JBL Live 300TWS). If the device doesn’t show up, update the list by pulling the screen down.
4. Tap the name of the headphones. If you have a request for code confirmation (usually 0000 or 1234), type it in.
5. Wait for the message "Connected" and the icon headphones in the list of devices.

On some Redmi models (e.g. Redmi Note 11 Pro)+) After you connect, you'll see an additional window with a selection of sound profiles" (AAC Or aptX, if supported. For headphones with noise-moldering (JBL Live 660NC) You can turn on the function here. ANC.

Headphones appear in the list of Bluetooth devices|The indicator on the headphones is lit blue (does not blink)|The sound is played without interruption.|Profiles are available in the sound settings A2DP/HFP-->

If the sound is only in one headphone after connection (relevant to the TWS-models), perform reset:

1. Put both earbuds in the case.
2. Hold the button on the case for 15 seconds until the indicators start flashing red.
3. Take out the headphones and repeat the pairing.

3. Solving common problems

Even with the right connection, Xiaomi Redmi users face common errors, and consider the most common and ways to fix them:

For models JBL s ANC (Like Live. 660NC Club One+) There's a problem with automatically turning off the noise maker:

1. Put the headphones on the phone.
2. Open the app. JBL Headphones (download to Google Play if not already installed).
3. In the section "ANC" Turn off the option "Stop Auto when paused".

⚠️ Note: Xiaomi Redmi with MIUI 12.5 and below, you may experience a conflict with the dual audio function. If the sound is only in one ear, turn off this option in Settings. → Sound. → Double audio.

4. Sound optimization and additional settings

After a successful connection, you should adjust the sound to your preferences. MIUI A few useful functions are available:

• 🎧 Equator: Go to Settings → Sound. → Equalizer and select preset (e.g., "Bas" for JBL Charge 5 or "The Voice" for podcasts).
• 🔊 Bass Enhancement: In the same menu, activate the Low Frequency Amplification option (available on Redmi Note 10 Pro and later).
• 🎵 Bluetooth codecs: for models with aptX (e.g, JBL Tour One M2) select this codec in Bluetooth settings (cog icon next to the device).
• 🔋 Battery Optimization: Add Headphones to Exceptions in Settings → Battery. → Optimizing the battery.

For owners. JBL with application support (e.g. Live) 660NC or tune 760NC) It is recommended to install official software JBL Headphones. It allows you to:

• Set up levels ANC/Ambient Aware.
• Update the headphone firmware (critically for the JBL Reflect Flow Pro, where bugs are patched).
• Create custom sound profiles.

If you use headphones for calls, check the microphone settings:

1. Open Settings → Applications → Permissions → Microphone.
2. Make sure that permission is enabled for the Phone and Contacts apps.
3. In Bluetooth settings, click on the gear icon next to JBL and activate "Use for calls".

⚠️ Attention: Xiaomi Redmi 9A/9C s MIUI 12 There may be no support for the aptX codec. AAC for better sound quality.

5. reset Bluetooth settings on Xiaomi Redmi

If headphones JBL They're connected but they're unstable (sound breaks, poor communication quality), and resetting Bluetooth on your phone will help, and this method removes all the stored devices and resets the cache, which solves 80 percent of software conflicts.

Instructions for MIUI 13/14:

1. Open Settings → Connections and Sharing → Bluetooth.
2. Click on the three dots in the upper right corner and select "Clear the cache".
3. Go back to the basic settings and go to About Phone → All parameters. → Resetting the network.
4. Select “Reset Wi-Fi, Mobile Network and Bluetooth” and confirm.
5. After restarting the phone, reconnect the headphones.

To reset the headphones themselves JBL Use the following combinations (depending on the model):

• JBL Tune 510BT/710BT: hold the buttons "+" and-at the same time 10 seconds.
• JBL Live 660NC: Hold the power button and button ANC 15 seconds.
• JBL Free X/TWS: Place the headphones in the case, hold the button on the case 20 seconds.

Once reset, the headphones will go back to the factory settings, and they will have to be reconnected. If the problem persists, check if there is any conflict. JBL With other connected devices (like smartwatches or speakers), turn off all the extra gadgets and try pairing again.

💡

Resetting the network on Xiaomi Redmi does not affect personal data (photos, contacts), but deletes all saved passwords of Wi-Fi and Bluetooth devices.

6. Features of connection to different models of Redmi

Firmware MIUI And the hardware differences between Xiaomi Redmi models affect the connection process:

On Redmi with NFC (For example, Note 11 Pro) you can speed up the connection by touching the headphones with the back cover of the phone (if the model is a model). JBL It supports Fast Pair as Live Pro 2:

1. Activate. NFC phone-setting.
2. Unlock the screen and bring the headphones to the top of the smartphone.
3. Follow the instructions on the screen for quick pairing.

If your Redmi is running on custom firmware (like LineageOS or Pixel Experience), you may need to manually install a Bluetooth stack.

1. Install the Bluetooth Auto Connect app from Google Play.
2. In the application settings, activate the option "Force Classic Audio".
3. Reboot the phone and reconnect.

7. Update to the headphone firmware JBL

The manufacturer regularly releases headphone updates that fix plug-in bugs, improve sound or add new features. JBL Live 660NC 1.4.0 fixes the problem with spontaneous disconnection from Xiaomi MIUI 13.

To update the firmware:

1. Install the app JBL Headphones from Google Play.
2. Connect the headphones to the phone via Bluetooth.
3. Open the application and go to the "Firmware Update" section.
4. If a new version is available, follow the instructions on the screen. Don't turn off the headphones during the process!

For models without application support (e.g, JBL Tune 120TWS) Updates are automatically installed when connected to JBL Portable or via PC to check the current firmware version:

1. Put the headphones on the phone.
2. B Settings → The phone. → All parameters. → Version. MIUI Press 5 times on "Bluetooth Version".
3. In the menu that appears, select your headphones - the firmware version will appear.

⚠️ Note: Update the firmware through JBL Headphones require at least 50% charge on the headphones. If the process is interrupted, the headphones may stop turning on — in which case, contact the service center. JBL.

8. Alternative ways of connecting

If the standard Bluetooth connection doesn't work, you can use alternative methods, for example, for models. JBL Multipoint (simultaneous connection to two devices, like the one you use) JBL Live 660NC):

• 📱 Connecting through the application: some models JBL (For example, Tour One. M2) maintain conjugation through JBL App even with troubled Bluetooth.

For owners of Xiaomi Redmi with an IR port (for example, Redmi Note 8 Pro), you can use an IR transmitter to control the headphones, but this will not replace a Bluetooth connection.

1. Open the Settings. → Connections and sharing → IR transmitter.
2. Select "Add device" and follow the instructions (applicable only for IR devices, not for JBL).

If none of the methods worked, check to see if the third-party software is blocking the connection, such as battery-saving apps (Greenify, AccuBattery) or VPN They might conflict with Bluetooth:

1. Go to Settings → Applications → Application Management.
2. Find applications with Bluetooth permissions and turn them off temporarily.
3. Reboot the phone and reconnect.

💡

On Xiaomi Redmi with MIUI 14, Bluetooth Audio Priority is introduced, which automatically disables other devices when you play audio. Activate it in Settings → Sound. → In addition, for stable work JBL.

FAQ: Frequent questions