How to connect iPhone to the TV Xiaomi 4S: all working ways in 2026

Connecting an iPhone to a Xiaomi Mi TV 4S opens up new possibilities for viewing photos, videos, and even games on the big screen. However, many users face difficulties: the TV can not see the smartphone, there are problems with synchronizing sound, the picture quality leaves much to be desired. In this article, we will discuss all the current ways of connecting – from wireless technologies to wired adapters – and also tell you how to avoid typical errors.

The Xiaomi Mi TV 4S (including the 4S 32, 4S 43, 4S 50" and 4S 55) features limited support for Apple protocols. Unlike newer series (such as the Mi TV Q2 or Mi TV P1), there is no built-in AirPlay 2 feature, but that doesn't mean that connection is impossible. The main thing is to choose the right method depending on your tasks: streaming a screen for presentations, streaming videos from YouTube or Netflix, or playing Mobile Legends on the big screen.

Before proceeding to the instructions, check:

• 📱 iOS version on your iPhone (relevant to wireless methods) Minimum supported version is iOS 12.3 for AirPlay.
• 📺 The TV firmware. TV 4S must be established MIUI TV at least 1.6.62 (checked in Settings) → On TV).
• 🔌 Ports available. Make sure there's a free TV. HDMI (Wi-Fi 5 GHz (for wireless methods).

AirPlay Connection: Does Xiaomi 4S Work?

Apple’s AirPlay protocol is the most convenient way to stream an iPhone screen to a TV, but with the Xiaomi Mi TV 4S, there are nuances here. Unlike newer models (like the Mi TV Q1E), where AirPlay 2 is supported out of the box, 4S does not have this feature.

This will require:

1. Install the AirScreen app on your TV (available from the Mi App Store or via APK).
2. Connect your iPhone and TV to the same Wi-Fi network (preferably 5 GHz for stability).
3. On iPhone, activate the screen Duplication function (in Control Point or Settings → Screen and brightness).

⚠️ Note: AirScreen can delay audio up to 0.5-1 seconds, due to the peculiarities of stream processing on Xiaomi TV 4S (processor T962 It's critical for watching movies, but it's tolerant for presentations or photos.

If the TV is not displayed in the list of devices for duplication:

• 🔄 Restart the router and both devices.
• 📶 Check that your iPhone and TV are connected to the same network (sometimes Xiaomi creates a separate network for guest devices).
• 🔧 In AirScreen settings on your TV, turn on the option "Allow all devices".

2. Wireless broadcast via Wi-Fi Direct (Miracast)

Wi-Fi Direct (or Miracast) is an alternative to AirPlay that works on most devices, including the Xiaomi Mi TV 4S. This method allows you to broadcast the screen of an iPhone without a router, but requires support from a smartphone. Unfortunately, Apple has limited Miracast on iOS, so you will need an additional app.

Instructions:

1. On the TV, go to Settings → Network → Wi-Fi Direct and activate the function.
2. On your iPhone, install Screen Mirroring for Miracast (or similar, for example, ApowerMirror).
3. Launch the app and select your Xiaomi TV 4S from the list of available devices.
4. Confirm the connection on the TV (entry may be required) PIN-code).

⚠️ Note: When using Wi-Fi Direct, your iPhone will be disconnected from the Internet. If you need to simultaneously stream your screen and use mobile Internet, connect your TV to your router via Ethernet and your iPhone to Wi-Fi.

Comparison of wireless connection methods:

3. Wired connection via HDMI (with adapter)

If wireless methods are not suitable due to delays or unstable connections, the best option is a wired connection via HDMI. This will require a Lightning → HDMI adapter (official from Apple or certified analogue).

Step-by-step:

1. Connect the Lightning → HDMI adapter to your iPhone.
2. Connect the adapter to the TV through HDMI-cable (use the port) HDMI 2.0 on Xiaomi 4S support 4K, if necessary).
3. On the TV, select the appropriate signal source (HDMI 1/2/3).
4. An iPhone may have a “Trust this device” notification, confirm.

Important: When connecting via HDMI on Xiaomi Mi TV 4S, the sound may not work if the TV settings select "PC" mode. To fix this, go to Settings → Sound → HDMI mode and select "AVR" or "TV speakers".

Advantages of wired connection:

• 🎮 Minimal latency (ideal for gaming).
• 📊 Maximum quality (up to) 4K@30Hz Xiaomi 4S 55").
• 🔋 No dependency on Wi-Fi.

💡

If the image on the TV is cropped at the edges, on your iPhone go to Settings → Screen and Brightness → Screen Resolution and select Standard instead of Scaling.

4. Connect via DLNA (for video and music)

The DLNA protocol allows you to stream media files (video, photos, music) from your iPhone to your TV without duplicating the entire screen, which is suitable if you just need to show a movie or slideshow from photos, but not play games or use apps.

How to set up:

1. On your TV, enable DLNA in Settings → Network → Sharing Media.
2. On your iPhone, install the VLC or Infuse app.
3. In the app, select the file to play and click the "Play on..." button, then select your Xiaomi TV 4S.

DLNA restrictions on Xiaomi Mi TV 4S:

• 🚫 No files with resolution above are supported 1080p.
• 🎵 Dolby Digital audio can not be played (TV supports only) PCM and DTS).
• 📂 No access to the system folders of the iPhone (only to the media library of the application).

5.Using Apple TV (optimum but expensive)

If you stream content from your iPhone to your TV often, the most reliable solution is to buy an Apple TV console. It supports AirPlay 2 without delay, and also allows you to install apps from the App Store directly to your TV. For Xiaomi Mi TV 4S, any Apple TV model from the 4th generation will suit.

How to connect:

1. Connect your Apple TV to your TV via HDMI.
2. Connect both devices to the same Wi-Fi network.
3. On your iPhone, activate Screen Duplication and select Apple TV.

Advantages of this method:

• 🎬 Support 4K HDR (If the TV and the content allow it).
• 🎮 Minimal latency (ideal for playing with Apple Arcade).
• 🔄 Automatic sync with other Apple devices (such as MacBook or iPad).

⚠️ Note: When using Apple TV Xiaomi Mi TV 4S You may have a color rendering problem if you have Dynamic Contrast on your TV settings. → Picture → Image modes.

6 Problem Solving: What to Do When Nothing Works

If none of the methods worked, check the following points:

Problem 1: The TV can't see the iPhone

• 🔌 Make sure both devices are connected to the same Wi-Fi network (not the guest network!).
• 📱 On iPhone, turn off the mode "Saving traffic" in Settings → Cellular service.
• 🔄 Restart your router (sometimes) DHCP-server "forgets" devices).

Problem 2: No sound when connected

• 🔊 Check on the TV to see what is in the settings → Sound. → Exit HDMI chosen "PCM".
• 🎧 On your iPhone at Control Point, make sure the sound is not redirected to AirPods or another device.
• 🔌 If you use a Lightning adapter → HDMI, Try another cable (cheap often don't transmit sound).

Problem 3: Image delay or jerking

• 📶 Switch to Wi-Fi 5 GHz (if you use wireless method).
• 📵 Disable other devices connected to the router (they can load the network).
• 🖥️ In the settings of the TV, turn off "Motion Processing" (Settings) → Picture → Movement).

💡

If after all the manipulations the connection does not work, try resetting the network settings on the TV: → Network → Network resets. This often helps in conflict. IP-address.

FAQ: Frequent questions about connecting iPhone to Xiaomi TV 4S