How to share Wi-Fi on Xiaomi: The Complete Guide

Modern Xiaomi and Redmi smartphones have long evolved from simple communication tools to powerful multimedia centers that can replace a router. Situations when you urgently need to connect a laptop to the Internet in a cafe, or a child’s tablet needs access to the network outside the home, arise regularly.

But despite its apparent simplicity, the configuration process in the MIUI shell or the new HyperOS has its own nuances that can be confusing to an inexperienced owner. Differences in firmware versions, hidden menus and energy saving features often make it difficult to quickly organize the network. In this article, we will discuss all aspects of how to share Wi-Fi on Xiaomi, ensuring a stable and secure connection.

You will learn not only about standard activation techniques, but also about the intricacies of frequency settings, password security and ways to save battery power when the modem is active. Understanding these mechanisms will allow you to use your smartphone as efficiently as possible in any environment.

Preparation of the device for operation in modem modem

Before you start directly activating the handout, you need to make sure that your device is ready to perform the functions of the router. The first and most obvious requirement is that you have an active connection to the mobile network. SIM-A card with a positive balance and data services included.

The second critical point is the signal level. The access point requires a steady 4G or 5G reception to work properly. If the indicator shows EDGE or G, the Internet speed on connected devices will be critically low, and the battery consumption of the smartphone will increase many times.

⚠️ Warning: When operating in access point mode, the smartphone begins to heat up intensely. Do not cover the device with soft fabrics and avoid direct sunlight during the distribution.

Automatic network synchronization helps to correctly display connection logs and avoid conflicts with security certificates on connected devices, which is especially important if you plan to connect corporate laptops or devices with strict security policies.

Classic method of activating the access point

The most common method of enabling Internet distribution is available through the standard system settings menu.The interface may vary slightly depending on the version of MIUI, but the logic of actions remains the same for all models, whether it is the flagship Xiaomi 14 or the budget Redmi Note.

To start, open the main settings menu and find the connection section, which is usually called Connection and Sharing or simply Wi-Fi Access Point, and it hides all the switches you need inside.

• 📱 Click on “Wi-Fi Access Point” to go to the control submenu.
• 🔘 Activate the top switch to start the signal broadcast module.
• 📝 When you first start up, the system will prompt you to specify a network name and password if you have not done so before.

Once activated, a special icon will appear in the status bar, usually resembling an antenna or a chain of two links, indicating that the phone now distributes the Internet, and other devices will be able to find your network by a given name (SSID) in the list of available Wi-Fi connections.

Advanced security and range settings

Standard settings often leave the network vulnerable or unoptimized. To maximize protection against unauthorized access and speed, you need to look at the "Setting up the access point" menu, and here are the key parameters that affect the network.

Always choose WPA3-Personal or, in the case of older devices, WPA2-PSK. Using an open network or outdated WEP makes your data vulnerable to interception, and also allows outsiders to use your traffic.

The switch between 2.4 GHz and 5.0 GHz allows you to adapt the network to the situation. The 2.4 GHz range has better penetration and compatibility with older gadgets, but it is often overloaded with neighboring routers.

⚠️ Attention: When choosing a 5.0GHz band, some older laptops and tablets may just not see your network.Use 2.4GHz for maximum compatibility.

You can also set a limit on connected devices, limiting the number of customers to 3-4 people will help keep the Internet speed for each of them high and prevent excessive load on the smartphone processor.

Quick activation through the notification curtain

For those who need to turn on the Internet several times a day, diving into the depths of the settings menu is inconvenient. Android and the MIUI shell offer a faster way to control through the control panel, popularly known as the “curtain”.

To activate this method, swipe top-down across the screen to open the control center. Find the Access Point icon among the icons (usually looking like two linked rings or an antenna). If you don't see it on the first screen, swipe left or press the edit button (often a pencil) to add a widget to the active panel.

However, simply tapping the icon only turns the function on or off. To change the network name or password through the curtain, you need to press and hold your finger on the access point icon, which will instantly throw you into the appropriate settings menu, avoiding unnecessary transitions.

• 👆 Swipe down to open the control panel.
• 📡 Find and click the icon "Access Point».
• ⏳ To set up, keep your finger on the icon. 1-2 seconds.

Using a quick menu is especially important when you need to share the Internet with a colleague or client, which saves time and allows you to focus on the main task without being distracted by finding the right switches in the system.

Distributing Wi-Fi without entering a password (QR-code)

In an era where remembering complex passwords is becoming a burdensome, Xiaomi offers an elegant solution for quickly connecting guests: You no longer have to dictate a long combination of characters or let other people type a password on your screen.

In the access point settings menu, immediately below the password field, there is often a button «QR-A code or a special icon, and clicking on it generates a graphical code that contains all the information you need to connect: the network name, the type of encryption and the password.

The guest is enough to open the camera on your smartphone (or the scanner app). QR-The device automatically reads the data and establishes the connection, bypassing manual input.

This method is not only convenient, but also more hygienic, as it eliminates physical contact with the screen of someone else's device, and also reduces the risk of password error, which often happens when using complex characters.

💡

If the guest has an iPhone, he can simply point the camera at the camera. QR-code without running additional applications – the iOS system recognizes it natively.

Connection problems and their solution

Despite the system's fine-tuning, users may find themselves in a situation where the access point is turned on but the Internet is not working or devices cannot see the network, most often the problem lies in the operator's settings or overflowing the cache of network services.

The first thing to check is that your mobile carrier has permission to distribute traffic, and some plans block the ability to use your smartphone as a modem or require you to connect an additional option, in which case the Internet on the phone itself works, but on the connected laptop it does not.

It is also worth paying attention to the parameter. APN (Access points. Sometimes you need to set the settings for the distribution. APN. Go to the mobile network settings, select your own SIM-You can try to create a new access point with the same parameters, but with a different name.

Settings → SIM- Maps and Mobile Networks → Select SIM- Cards → Access Points (APN)

If the problem persists, try resetting your network settings, which will return all network settings (Wi-Fi, Bluetooth, mobile Internet) to factory values by removing saved passwords and configurations, often eliminating software conflicts.

• 🔄 Reboot your smartphone to update network services.
• 📵 Turn off and turn on the flight mode.
• ⚙️ Check the restrictions in the Security app».

💡

If the internet on the connected device is not working, even though Wi-Fi is connected, the problem is 90% of the time it is in the operator’s settings or APN settings, not in the Xiaomi phone itself.

The Impact of Wi-Fi Distribution on Battery and Performance

Access point mode is one of the most energy-intensive processes for a smartphone. The constant operation of the radio module for transmission, processing network packets and simultaneous operation of the screen (if it does not go out) lead to a rapid discharge of the battery.

Temperature is also important, because when you're actively distributed, the processor and modem heat up, and in the summer, or when you use cases with poor heat transfer, it can lead to trottling, which is a forced performance reduction to protect components, and as a result, Internet speed can drop.

To minimize the negative impact, it is recommended to turn off the smartphone screen immediately after connecting customers, and you can also use the “Disconnect Timer” function, which will turn off the access point if no one is connected to it within a specified time (for example, 5 or 10 minutes).

⚠️ Warning: Do not leave the access point on unattended for a long time, especially if devices are not connected to it, this will lead to useless battery discharge and potential network vulnerability.

Using the original charger during the handout will help offset the energy costs, but in this case the heating of the case will be even more intense, it is better to remove the case and put the phone on a hard, cool surface.