How to share the Internet with Samsung on Xiaomi

In today's world, smartphones have become more than just communications, they have become full-fledged digital life management centers, where access to the global network is constantly required, situations where one device, such as Xiaomi, does not have a SIM card with traffic, and Samsung has an active data package, occur quite often, in which case the distribution of the Internet becomes the only way to go online for the second gadget without using a third-party router.

The process of creating an access point between devices from different manufacturers, such as Samsung and Xiaomi, is technically no different from the standard procedure, however, users often face the nuances of the MIUI or One UI interface. It is important to understand that the transmitting side (Samsung) acts as a modem, and the receiving (Xiaomi) simply connects to the created Wi-Fi network. The key point is to properly configure the frequency range on the transmitting device to ensure maximum compatibility.

In this article, we will take a look at all the stages of setup, possible network visibility problems, and ways to optimize power consumption. You will learn how to quickly activate modem mode, change password, and check who is connected to your network. Ready to work will take only a few minutes if you follow the algorithm.

Preparing devices for creating an access point

Before setting up, make sure both smartphones are in working order and have sufficient battery power. Internet distribution is an energy-intensive process that can quickly land the transmitting device battery. Therefore, it is recommended to connect Samsung to the charger if the charge level is below 40-50%.

It is also worth checking the carrier’s tariff plan on a Samsung device. Some operators block or separately charge traffic transmitted through the access point, so it is better to check the terms with the provider in advance. On the receiving device, Xiaomi should make sure that the Wi-Fi module is serviceable and able to search for networks.

• 📱 Make sure that Samsung has mobile data enabled.
• 🔋 Check the battery level on both smartphones.
• 📶 Make sure there is a reliable signal in the reception area. 4G/LTE.
• 🔒 Create a strong password in advance to protect your network.

It is not superfluous to restart both devices before setting up to reset possible temporary errors of network modules, this is especially true if previously there were problems with connecting to Wi-Fi. After restarting, the system is more stable, and network search is faster.

Setting up an access point on Samsung

The process of activating modem modem on Samsung One UI smartphones may vary slightly depending on the Android version, but the logic remains the same: You need to open the settings and find the partition responsible for connections. It is usually called Settings → Connections → Mobile hotspot and modem.

In the menu that opens, you have to click on the "Mobile hotspot" itself to go to the advanced settings, so it's not just about turning on the switch, but first setting up the security settings. Click on three dots in the corner or the "More" button to change the network name (SSID) and password. The password has to be complicated so that neighbors can't use your traffic for free.

Special attention should be paid to the frequency range. The default can be 5 GHz, which provides high speed, but older Xiaomi devices may simply not see this network. If Xiaomi does not find the network, switch the range to 2.4 GHz in the access point settings on Samsung. This guarantees maximum compatibility.

⚠️ Note: Do not leave the hotspot open (without a password), as anyone can connect to your network and use your traffic, which can lead to unexpected costs.

Connecting Xiaomi to Samsung’s Network

Once the access point on Samsung is activated, go to the Xiaomi device. On the receiving smartphone, you need to open the Wi-Fi settings. The path usually looks like this: Settings → Wi-Fi. Make sure that the Wi-Fi power slider is activated and lit in blue or green.

MIUI or HyperOS will start scanning the available networks. In the list, you should see the name (SSID) you set on Samsung. Click on it. If the network is password protected (which is recommended), the system will ask you to enter the security key. Enter the password you set earlier on the transmitting device.

• 📡 Wait for the Wi-Fi icon to appear in the status bar Xiaomi.
• 🔑 Carefully enter the password, observing the register of letters.
• 🔄 If the connection fails, try to forget the network and connect again.

Sometimes Xiaomi can warn that “the network has no access to the Internet” even if the connection is installed. This is standard Android behavior that checks the availability of Google servers. If there is Internet on Samsung, just ignore this warning or select the “Connect anyway” option.

Connected Device Management and Security

The owner of Samsung has full control of the access point, and can see who is connected to the network. In the menu of the access point on Samsung there is a section "Connected devices." It displays the names of gadgets and their names. MAC-This allows you to monitor traffic and, if necessary, block unknown users.

The lock function works instantly. If you see an unfamiliar device, just click on it and select "Disable." You can also set a limit on the number of devices you connect to avoid congestion. Usually the default is a limit of 10 devices, but for a smartphone, 3-5 is optimal.

To improve security, it is recommended to change the password of the access point periodically, especially if you give the Internet to unauthorized people, you can also hide the network name (SSID), making it invisible to general search, but then Xiaomi will have to enter the network name manually when you first connect.

Solving Connection Problems

Despite the simplicity of the procedure, users may encounter difficulties. The most common problem is that Xiaomi sees the network but does not connect or writes "Authentication Error." In this case, on the receiving device, you need to select the network, click "Delete" or "Forget", and then try to connect again by carefully checking the password.

Another common situation is that devices can see each other, but the Internet doesn't work, and this could be due to Samsung's APN settings or a temporary failure at the operator. Try turning on and off flight mode on the transmitting device. Also check if traffic in the main data packet has run out.

⚠️ Note: If after connecting Xiaomi Internet on Samsung itself began to work slowly or disappeared, perhaps your tariff plan does not support simultaneous operation in modem and normal surfing.

Sometimes the problem is static. IP-On Xiaomi, in the Wi-Fi settings (advanced settings), try to switch the settings. IP c "Static" on"DHCP". This will allow the router (Samsung) to automatically issue the correct address.

Optimization of energy consumption and speed

The access point mode puts a lot of strain on the processor and the Samsung radio, which leads to heat and quick discharge. To minimize the consequences, try not to run heavy games or navigation on the device that distributes the Internet.

Timeout settings will help keep the charge. Samsung hotspot menus can set automatic Wi-Fi shutdowns if no one is connected to the network for 1, 3, 5 or 10 minutes.This is a useful feature that will prevent the phone from draining in your bag if you forgot to turn off the handset.

For maximum data speed, make sure both devices support 4G LTE or 5G. If Samsung is in 3G coverage, the speed on Xiaomi will be low regardless of settings. Moving to a window or outdoor space can improve signal and, as a result, internet speed.

Alternative ways to distribute the Internet

In addition to the classic Wi-Fi, there is the possibility of distributing the Internet through the Internet USB-cable. USB-The modem provides the most stable connection and charges the Xiaomi device at the same time, but requires a physical cable connection.

The Bluetooth modem is slower than Wi-Fi but uses less power, and is suitable for small amounts of data, such as messengers or navigation, when you want to save the most battery power Samsung.

💡

Use it. USB-cable for distribution of the Internet, if you need to update the firmware on Xiaomi or download large files - this will provide maximum stability and speed without loss of signal.

The choice of method depends on your current tasks and the availability of accessories. For everyday use, Wi-Fi remains the most convenient and versatile option, requiring no wires and complex pairing configuration.

Frequently Asked Questions (FAQ)

💡

Using the 2.4GHz band and setting a strong password are two of the main conditions for a stable and secure Internet distribution between Samsung and Xiaomi.