How to turn off flight mode in the phone Xiaomi

The situation when the screen suddenly appears on the screen of the smartphone icon of the aircraft and communication with the outside world completely disappears, familiar to many owners of smartphones. In the Android operating system, which is the basis of the shell MIUI and HyperOS, this mode is designed to quickly turn off all wireless modules, but sometimes it stops responding to user commands. This can occur due to software failures, update conflicts or temporary errors in the operation of the radio module.

Recovery of cellular and Wi-Fi often requires not just a standard push of a button, but a series of sequential actions. In some cases, the system can “hang” in a standby state, ignoring attempts to switch over the notification curtain. Understanding the causes of the problem helps to choose the most effective method of solving, whether it is a simple reboot or a deeper setup of network parameters.

In this guide, we will look at all possible ways to force or routinely exit isolation mode, learn how to use hidden engineering menus, reset network settings, and apply forced reboot methods if standard interfaces do not respond, and act consistently to ensure that system files do not disrupt the system files.

Standard methods of disconnection through the curtain and settings

The most obvious and frequently used way to bring the phone back to life is to use the control center. On most Xiaomi and Redmi models, you just have to swipe down from the top edge of the screen. On the menu that opens, you have to find an icon with an image of the plane, and if it's illuminated in gray or orange, then the mode is active, and you just need to touch the icon to turn it off.

In some versions of the MIUI shell, the location of the elements may differ, especially if you change the display style to "Classic". In this case, the icon may be on the second page of the Quick Access menu. If the touch does not work, try double-pressing or holding your finger on the icon for a couple of seconds to call the context menu or force the status of the switch.

If the visual interface is not responsive, you should refer to the main system settings. Go to Settings → Connections and Sharing (or “Additional Features” in older versions). This is where the more detailed Flight Mode switch controls the radio module at the software level. Often, state switching in this menu works even when the widget on the desktop is “hanged”.

  • ✈️ Flip the notification curtain down twice to open the full control center.
  • 📱 Find the badge of the aircraft and make sure it doesn’t burn in an active color.
  • 🔄 If the icon is not pressed, go to deep settings through the menu "Settings".
  • 🔋 Check if the battery is critically discharged, as some functions may be blocked when the charge is low.

It's worth noting that sometimes the problem isn't the software, but the physical locking of the signal. Make sure the phone doesn't have a metal case that can shield the antenna, making the system think it's in the no-signal zone and suggest that it turn on air mode.

📊 How often do you have a flight mode?
Every day.
Once a week.
Rarely, after updates
Never encountered it.

Rebooting the device as a method of resetting the radio module

If the software switches are ignored, the most effective way to reset the radio state is to completely reboot the smartphone.This process clears the RAM and restarts all system services, including those responsible for communication. On current Poco and Xiaomi models, it usually takes a few seconds to press the power button to call the off menu.

In the menu that appears, select Reboot (or Reboot). This is not to be confused with a full shutdown, although it often helps. The system re-initializes the modem drivers during start-up, which often eliminates the software "glutch" that blocked the ability to exit the aerospace mode. If the screen does not respond to presses, press the power button and one of the volume buttons (usually the top) simultaneously for 10-15 seconds.

⚠️ Warning: Hard Reset buttons can cause unsaved data to be lost in open applications if the system fails to lock it. Use this method only if the screen is not fully responsive.

After the phone turns on, wait 1-2 minutes before active actions. The system should fully load all background processes. If the antenna icon appears, but the network does not catch, try to turn on and off flight mode again after full loading of Android.

  • 🔌 Press the power button to call the control menu.
  • 🔄 Select the “Reboot” option to update system processes.
  • ⏳ Wait for the full load of the desktop and the appearance of network icons.
  • 📡 Check the status of the SIM card in the top status bar.

☑️ Checklist of actions when hanging

Done: 0 / 4

Using an engineering menu to diagnose communications

For advanced users who are not helped by standard methods, there is access to a hidden engineering menu, a powerful diagnostic tool that allows you to control the radio module directly, bypassing the standard MIUI interface. To get there, open the Phone app and enter the combination ##4636#. If the code is entered correctly, the menu will open automatically without pressing the call button.

In the list that opens, select Phone Information. Here you'll see a lot of settings. Find the Turn off radio/Turn on radio switch. If it's off, turn it on. If it's on, turn it off and turn it on again. This action will force the modem to restart at the hardware level.

##4636##

Also, check the network type you have installed on this menu. Make sure that the "Set preferred network type" selects a value that your operator supports, such as LTE/TD-SCDMA/GSM or NR/LTE/GSM for 5G. An incorrectly selected network priority can create the illusion of operating in flight mode, when the phone simply cannot find the signal in a given standard.

⚠️ Warning: Be extremely careful in the engineering menu. Changing unknown parameters can lead to unstable phone operation or complete loss of communication.

After manipulations in the engineering menu, it is recommended to restart the device so that the changes are applied correctly, a method that is especially effective on older Redmi and MI models, where communication drivers can work unstable after updates.

What if the code doesn't work?
On some global firmware versions, access to the engineering menu through code may be blocked by developers. In this case, try using third-party applications from the Play Market, such as "Force LTE Only", which provide similar functionality through system APIs.>If code ##4636## does not work, this may mean that your firmware version has limited access to diagnostics. Try installing Force LTE Only or a similar application that allows you to control the type of network without root rights. Resetting network settings to factory settings When simple methods do not help, the problem may be caused by accumulated errors in the configuration of network connections. Resetting to the network settings of the network network network network connections. It is important to understand that this step will not delete your personal files, contacts or apps, but will forget Wi-Fi passwords and associated devices. → Connections and sharing → Reset Wi-Fi, mobile networks and Bluetooth. At the bottom of the screen, you'll see the Reset button. PIN-The unlock code or pattern lock, once confirmed, the phone can restart.Pre-reset option After reset, Wi-Fi password Save Removed Connected devices BT In the list Removed Settings Save APN Modified user Factory Flight Mode Can be Active Disabled This method often resolves the problem when the phone "thinks" it's still in flight mode, due to carrier profile conflict. Once reset, the phone will start searching for the network as a new device, ignoring previous misconfigurations. 🗑️ Go to the Network Settings Reset Menu. 🔑 Confirm the action by entering a security password. 📡 Wait for the automatic reboot or perform it manually. 📝 Re-enter your Wi-Fi passwords. SIM-Sometimes software methods are powerless because the problem is physical. Flight mode may or may not turn on if the smartphone can't see. SIM-This often happens after the device falls, or if the card has oxidized. Remove the SIM card tray and look carefully at the contacts. Wipe the gold chip. SIM-Make sure the card is free of chipping and scratching. If you have a second SIM card or the ability to check the card on another phone, make sure to do so. A faulty SIM card can send erroneous signals to the modem, causing the system to block the radio channel. It is also worth checking the SIM card tray. If it is deformed or moisture is in it, the contacts may not close. Put the tray back before the characteristic click. If the phone then came alive and started catching the net, it means the problem was in poor contact. In cases where the phone was exposed to moisture, the flight mode could be a protective reaction of the system. ⚠️ Warning: Never try to remove the SIM card tray if the phone is wet.Let the device dry completely during the period 24-48 It's a very rare problem, it's a problem with the antenna module inside the phone, and if the device falls, the antenna connector on the board may have moved away. This requires dismantling the smartphone and checking internal connections, which is better to entrust the specialists of the service center. 💡Physical contact SIM-maps and tray integrity are a common but overlooked cause of exit problems (FAQ) Why does flight mode turn on on itself? Automatic turn on can be caused by a malfunction of applications that control energy saving, or conflict with established design themes. It can also signal overheating of the processor or modem when the system forcibly shuts down the radio part for cooling. Can a virus block the flight mode shutdown? In theory, malware can change system settings, but on Android this is rare. Most often the cause is advertising modules in cheap applications or errors of system updates. MIUI. Check the phone with antivirus and delete the recently installed suspicious programs. Will the phone reset all data when you reset the network settings? No, resetting the network settings (Wi-Fi reset, mobile networks and Bluetooth) affects only the connection parameters. Your photos, contacts, applications and files will remain safe. Only passwords from Wi-Fi and Bluetooth devices will be deleted. What if nothing helps? If no reboot, no reset, no engineering menu helped, perhaps a firmware is damaged or there is a hardware malfunction of the modem. In this case, you should try resetting the computer through the Flash service or Xiaomi's.