How to turn off flight mode on Xiaomi smartphone: the full guide

When an airplane icon appears on a smartphone screen and the Internet stops working, it can be taken by surprise at the most inopportune moment. Users of Xiaomi, Redmi and POCO devices often find that standard methods of deactivating this mode no longer respond to pressing. This is not just a minor inconvenience, but a serious violation of the functionality of the gadget, because without communication you can not make calls or use instant messengers.

Flight mode, or air mode, is designed to quickly shut down all wireless communication modules, which is necessary in airplanes or to save battery power. However, software failures sometimes occur in the shell of MIUI or HyperOS that block the reverse process of switching on modules. In this article, we will discuss all the existing ways of forced and regular disabling this feature, from simple swipes to complex engineering manipulations.

Don't panic if the usual switch in the notification curtain has become gray and inactive. There are many workarounds that allow you to bring your phone back to life without losing data. We'll look at the algorithms for different versions of firmware and models so you can choose the right solution to the problem.

Standard ways to disconnect through the MIUI interface

The most obvious and frequently used method is to use a control center. In modern versions of the shell from Xiaomi, the notification curtain interface has been split into two parts, which sometimes confuses beginners. To turn off air mode, you need to swipe from the upper right corner of the screen down where the quick access buttons to Wi-Fi, Bluetooth and mobile network are located.

Find an icon with an image of an airplane. If it's illuminated in orange or blue, it means that the mode is active. One brief tap should deactivate the function, and the icon in the status bar will disappear. If the interface responds but the aircraft icon remains, try double tapping or long-holding your finger on the icon to go into the detailed settings.

In some cases, the system may temporarily ignore touches due to the freeze of the SystemUI process. Try unlocking the screen, waiting a few seconds and repeating the action. Also effective is to switch the brightness of the screen with a slider, which sometimes "wakes up" the touch layer of the interface.

Using the smartphone settings menu

If the notification curtain is not working or is not available due to a lock screen, you should refer to the main configuration menu of the system. This method is more reliable, since it addresses directly to system parameters, bypassing the graphical widgets of the desktop.

At the top of the list of parameters is usually the section associated with the connection. MIUI, it could be called «SIM-maps and mobile networks" or simply have a switch handed out separately. Find the flight mode and turn the switch to the "Switch off" position».

If you can't find this item right away, use the search bar at the top of the settings menu. Type "flight mode" or "aviarezhim" and the system will prompt you to go to the desired switch. This is especially true for users who have upgraded to HyperOS, where the menu structure may have changed.

⚠️ Note: If the switch is gray and not pressed, it indicates a deep system failure of communication drivers or software conflict, not a simple interface error.

Forced reboot and network reset

When software switches are ignored, the method is to reboot the device. Unlike simply turning off the screen, a full reboot re-initiates all system processes, including modem drivers. On Xiaomi smartphones, you need to press the power button for 10-15 seconds.

If a conventional reboot doesn’t work, a more radical but secure method is to reset your network settings, which won’t delete your personal files, photos, or contacts, but will return your Wi-Fi, Bluetooth, and mobile settings to factory values, which often helps if configuration files have accumulated errors.

To perform the reset, go along the path: Settings → Connection and Sharing → Reset Wi-Fi, mobile networks and Bluetooth. Confirm the action and wait for the process to complete. After that, the phone can restart itself.

It's important to understand the difference between a network reset and a factory reset: the first one only affects communication modules, the second completely cleans the phone's memory, and don't confuse these actions if you want to save your data.

Manipulation with SIM-map and physical modules

Physical exposure to the communication module often helps to "shake" the system if the software methods are powerless. SIM-The card makes the phone reinterview the slot and log in, which can automatically unblock the flight mode.

Out. SIM-You can wipe the contacts with a soft, dry cloth and put them back in the correct position of the chip. Wait for the network signal to appear. If you have a two-sym phone, try leaving only one card or swapping them to prevent the Symbol from malfunctioning».

In rare cases, the problem may be oxidation of the tray contacts or moisture. If the phone has recently been exposed to water, even minimal, the flight mode may be triggered as a protective reaction of the system, in which case drying the device in rice or silica gel may be necessary.

Diagnostics through engineering menu and codes

For advanced users, there is a hidden test menu that allows you to control the radio module at a deeper level, and entering a special code in the Phone app can open access to diagnostics. Try dialing the combination ##4636##.

If the menu is open, select Phone Information. Find the Set Radio State switch or the Radio Module switch. If it's turned off, activate it. This action will force the network search to start, ignoring the status of the air mode in the interface.

It is worth noting that newer versions of MIUI and HyperOS often close access to this menu or require activation through special dealer apps. If the code does not work, try installing the Xiaomi Eu app or similar utilities to unlock hidden features.

Solving problems with the power button and sensor

Sometimes the problem is not the software, but the hardware. A sticky on/off button can constantly signal the system to change its state, and check if the button is stuck in the pressed state due to cover or contamination.

Also, avoid the problem of phantom taps on the screen: If the display is damaged or has matrix defects, it can activate the functions on its own. Try to clean the screen and remove the protective glass to see if spontaneous switching on of the air mode disappears.

If the phone gets hot, the system can force the communication modules to protect the components. Let the device cool down in a cool place, disconnecting from charging. Overheating of the processor or battery is a common reason for blocking network functions on Xiaomi.

💡

Use the sensor testing app to check if there are no “dead zones” or false taps in the notification curtain area.

When to carry your phone to the service

There are a number of symptoms that indicate that software cannot solve the problem: If the phone falls, is hit or contacted with a liquid, and then stopped seeing the network, there is a possibility of a physical breakdown of the antenna module or plume.

The constant appearance of the No badge SIM-Even after resetting and flashing, the card is also a wake-up call, which could mean the power controller or the radio frequency tract itself is out of order, requiring soldering and replacement of components on the board.

If the phone goes into airplane mode on its own at random points in time, it can indicate battery degradation or problems with the motherboard, in which cases, self-experimentation can only make things worse.

⚠️ Warning: Do not attempt to open the case of the smartphone yourself if it is on warranty.Flagging the seals will lead to denial of free service.

Frequently Asked Questions (FAQ)

💡

In most cases, the problem is solved by simply restarting or retrieving. SIM-cards, but if symptoms recur, a specialist's diagnosis is required.