How to set up Tele2 Mobile Internet on Xiaomi: A Complete Guide to Problem Solutions

Tele2’s mobile internet on Xiaomi smartphones often requires manual setup despite the operator’s automatic activation of services. Users face problems with no 4G network, slow speed or complete lack of access – and this is not always due to coverage or tariff. 80% of the time the problem lies in the wrong APN settings (access point), disabled data options or conflicts with the MIUI firmware.

This article will help you understand how to set up the Tele2 Internet on any Xiaomi smartphone – from the budget Redmi to the flagship Mi and POCO. We will look not only at the standard procedure for entering APN parameters, but also hidden settings for speeding up LTE, solving problems with VoLTE, and troubleshooting methods. All instructions are relevant for MIUI 12-14 firmware and Android 11-14 (2026).

Why Tele2 Mobile Internet is not working on Xiaomi: the main reasons

Before you start setting up, it's important to understand the root of the problem, and here are the most common reasons why the Internet isn't available:

• 📵 Non-activated service - even if SIM-The card is new, mobile Internet can be disabled by default (especially when buying a card in supermarkets).
• 🔧 Resettings APN — post-refresh MIUI or phone reset access point parameters are reset to factory.
• 📶 Network restriction - in the settings of the smartphone can be selected mode Only 3G or 2G, blockage 4G/LTE.
• 🛡️ Locking the operator — Tele2 sometimes restricts access to the Internet in case of suspected fraud (for example, frequent change of devices).
• 📱 Problems with SIM-card – physical damage, improper cropping under nano-SIM or an outdated standard (for example, USIM instead of eSIM).

If you just inserted SIM-The card and the Internet didn't work automatically, so don't be quick to blame the operator. 60 percent of the time, the problem is solved by manual adjustment. APN — We will explain this in detail in the next section.

Manual setting up APN for Tele2 on Xiaomi: step-by-step instructions

The APN (Access Point Name) settings are the "address" that a smartphone uses to connect to the carrier's Internet. Tele2 has standard options, but sometimes requires manual input.

1. Open the Settings app on your Xiaomi.
2. Go to section. SIM-maps and mobile networks → Choose yours. SIM-map Tele2.
3. Click Access Points (APN) → Add an Access Point (or New APN).
4. Fill in the fields as shown in the table below. Leave all other parameters empty if they are not specified.

After filling in, save the settings (Save or Ready button), then select the created profile in the APN list. Reboot your smartphone - the Internet should work within 1-2 minutes.

Profile name - "Tele2 Internet" |APN - "internet.tele2.ru" (without quotes) | Type APN - "default,supl" | Protocol - IPv4/IPv6-->

⚠️ Attention: If on the list APN There's a profile already. Tele2 MMS Or similar, delete it. Multiple profile conflicts can block Internet access.

How to enable 4G (LTE) on Xiaomi for Tele2

Even the right one. APN The smartphone can only connect to 3G, If the network settings are inappropriate, you force activation. 4G:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-map Tele2 → Network type (or preferred network type).
3. Set the LTE/4G/3G/2G (auto) or LTE/4G only.
4. Activate the Volte (VoLTE) and ViLTE options if available (this will improve call quality).

Some Xiaomi models (such as the Redmi Note 10 Pro or POCO F3) may require additional customization for stable 4G:

• 🔄 Turn on Flight Mode for 30 seconds, then turn off - this will reset the network settings.
• 📡 From the #4636## menu (engineering menu) select Phone Information → Set the preferred network type in LTE only.
• 🔧 If the speed 4G Low, try to disable Band Stacking in the settings SIM-Cards (if option is available).

💡

If after turning on LTE smartphone stopped catching the network, return settings in Auto and check the coverage of Tele2 in your region on the operator's website.

Tele2 Internet does not work despite the correct settings

If you still don’t have access to the Internet after setting up your APN and enabling 4G, use this diagnostic guide:

1. Balance and tariff check

Make sure you have enough money in your account and the rate includes mobile internet.

• 💳 Type *105# and the balance information will appear.
• 📄 Send. SMS with the text Balance number 159.
• 🌐 Go to your personal office. Tele2 (If you have access to Wi-Fi).

Diagnostics SIM-map

Problems with SIM-The card is a common reason for the lack of Internet:

• 🔍 Physical condition: whether there are chips, scratches or contaminants on the chip.
• 🔄 Installation Property: Reinstall SIM-card in the tray (on some Xiaomi tray has a “key” – the card is inserted only in one position).
• 🆔 Type of card: Tele2 recommend USIM (not obsolete SIM). If your card is older than 5 years, replace it in the operator’s cabin.

3. Resetting network settings

If the previous steps didn’t help, reset the network settings:

1. Go to Settings → About the phone → Reset settings.
2. Select Network Reset (not to be confused with a full reset!).
3. After rebooting, reset the APN (see section above).

⚠️ Warning: Network reset will delete all stored Wi-Fi passwords and associated Bluetooth devices.

Features of setting up Tele2 on popular models Xiaomi

Some Xiaomi smartphones have unique “chips” or bugs that affect the operation of the mobile Internet.

For models with duals SIM-The Redmi Note 13 Pro+) It is important to properly prioritize the network:

1. Go to Settings. → SIM-maps and mobile networks → Priority SIM-map.
2. Select Tele2 as the primary data card.
3. Turn off AutoSwitching if it interferes with a stable connection.

How to speed up mobile Internet Tele2 on Xiaomi: hidden settings

If the internet is working but the speed is poor, use these tips to optimize:

• 🚀 Turn off background restriction: in Settings → Annexes → Special rights → Data limitation ensure that for key applications (browser, messengers) background data transfer is allowed.
• 📡 Use your preferred frequencies LTE: Select from the Engineering Menu (#4636##) LTE Band and manually specify ranges Tele2: 3 (1800 MHz), 7 (2600 MHz), 20 (800 MHz).
• 🔄 Reset network statistics: in Settings → SIM-map → Data usage click Reset statistics – this sometimes eliminates the “hang” of the connection.
• 🛡️ Turn it off. VPN Proxies: Some applications (such as AdGuard or 1.1.1.1) may conflict with settings Tele2.

For advanced users: If your Xiaomi supports Dual Channel Acceleration (like Mi 13 Ultra), activate this option in Settings → Connections → Additional. It allows you to use Wi-Fi and mobile data simultaneously to speed up downloads.

💡

If Tele2’s 4G speed is below 10 Mbps, the problem is most likely a congested operator tower. Check the coverage on Tele2’s website or try connecting elsewhere.

Frequent Mistakes and How to Avoid Them

When setting up mobile internet, users often make the same mistakes, and here are the most common ones and ways to avoid them:

• ❌ Misprints in APN: quirky internet.tele2.ru It'll lead to an error. Always copy the name. APN source.
• ❌ Use of old profile APN: If there is already a profile in the list Tele2 MMS or Tele2 WAP, Remove it before creating a new one.
• ❌ Ignoring updates: outdated firmware MIUI You may not support new communication standards (e.g., VoLTE) and check for updates to Settings regularly. → Updating the system.
• ❌ The wrong network mode: the choice 3G strip you 4G, Only 4G It can lead to lack of communication in areas with poor coverage.

Another common mistake is trying to set up the Internet through the Tele2 app. Despite the operator's promises, the automatic configuration through the app often works incorrectly, and it's better to enter the settings manually, as described above.

FAQ: Answers to Frequent Questions