How to set up mobile internet on Xiaomi Phoenix: from APN to troubleshooting

Mobile Internet on Xiaomi Phoenix may not work out of the box even with the installed SIM-The reason is because of the wrong settings. APN, No operator frequency support or software failures. This will help you configure 4G/5G from scratch, check compatibility with Russian operators and eliminate common errors such as the absence of a network icon or slow speed.

Features of Phoenix (models) M2304W1MIY, M2304W1MI etc.) - dual SIM-Slots with VoLTE support and 5G SA/NSA, But it requires manual network settings to work properly, and we'll go through all the steps, from choosing the priority type of connection to resetting the module configuration through the engineering menu. FAQ problem-solving.

Preparation: verification SIM-Compatibility and compatibility with the operator

Before setting up the internet, make sure your SIM-map:

• 📱 Activated by the operator (check balance and status through the USSD-*100# team or personal account).
• 🌐 Supports 4G/5G (old-fashioned SIM without LTE It will not work on modern networks).
• 🔄 Properly installed in the slot SIM 1 (on Phoenix, it usually supports a priority connection).

Also check the compatibility of Xiaomi Phoenix with your carrier.The model supports the following ranges:

If your carrier uses rare bands (e.g. B26 in Yota), communication may not work smoothly. Check the frequencies on the operator's website or through the NetMonster app (available on Google Play).

⚠️ Attention: Phoenix with firmware MIUI Global 14+ Support may be disabled 5G By default. Insert it manually in Settings. → SIM-maps and mobile networks → Preferred type of network → 5G.

Automatic setting APN: when it works

In most cases, Xiaomi Phoenix automatically loads settings. APN first-installation SIM-To initiate the process:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-map, SIM 1: MTS).
3. Slip the access points (APN) → Add (if the list is empty).
4. Click on the three dots in the top right corner and select Reset to default values.

If the automatic setting works, a profile with your carrier's name (e.g., internet.mts.ru) will appear on the list. Check the Internet by restarting your phone. If there is no connection, go to manual settings.

3. Manual creation of APN for Russian operators

If the automatic setup didn't work, create APNs manually.

MTS:

• 📛 Name: MTS Internet
• 🌐 APN: internet.mts.ru
• 🔑 Type of authentication: PAP
• 📡 Type APN: default,supl

Beeline:

• 📛 Name: Beeline Internet
• 🌐 APN: internet.beeline.ru
• 🔑 Username: beeline
• 🔑 Password: beeline

MegaFon:

• 📛 Name: Megafon Internet
• 🌐 APN: internet
• 📡 Type APN: default,supl,mms
• 📌 MCC: 250, MNC: 02

Once you have entered the settings, save the profile, select it from the APN list and restart the phone. If the internet is not working, check the correctness of the data entered (especially the register in the APN names).

Profile name without spaces and special symbols |

APN is introduced in the lower case (example: Internet.mts.ru)|

Type APN contains "default" |

Password and user name (if any) are the same as the operator’s requirements-->

4. Network Priority Setup: 4G vs 5G

By default, Xiaomi Phoenix can use 3G to save charge. To force 4G or 5G to be enabled:

1. Open the Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-map.
3. Tap the preferred type of network.
4. Install: 📶 LTE/4G — for stable connection (recommended). 🚀 5G (SA/NSA) — If your company supports the fifth generation.

Some MIUI firmware may hide the 5G option, so that it can be unlocked:

Enter the dialer: ##4636###


Go to "Phone Information" → "Installation of a network type"




Select "LTE/5G auto"

⚠️ Attention: Phoenix with MIUI 14.0.4+ choice 5G VoLTE may disappear (calls through the 4G). If the calls are not working, go back to the regime. LTE.

💡

If 5G has made the internet slower, check coverage in your area through the OpenSignal app. 4G may be more stable in your location.

5 Diagnostics of problems: why there is no Internet

If after setting up the APN and the type of network the Internet does not work, check the steps:

Signal verification:

• 📶 Make sure that the status bar is displayed 4G/5G (not H+ or).
• 🔍 Go to Settings. → The phone. → Status. SIM-Check the signal level and check the signal level (should be > -100 dB).

Speed test:

• 📊 Run Speedtest (app or website) if ping > 500 ms or speed < 1 Mbps – the operator side problem.
• 🔄 Try switching to another one. SIM-card if there is a second card).

3. Resetting network settings:

• ⚙️ Go to Settings. → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.
• 🔄 After resetting, reset. APN (see section 3).

If the problem persists, it could be an IMEI lock (check with *#06#) or a hardware defect in the communication module, in which case, contact the service center.

6. Additional settings for experienced users

If standard methods don’t help, try:

Modem mode change:

• 🔧 In the Engineering Menu (#4636##) go to Phone Information.
• 📡 In the Set Preferred Network Type section, select LTE only if 5G needless).

Firmware update:

• 🔄 Check the relevance of the software in the Settings → The phone. → Updating the system.
• 📥 If an update is available, install it (sometimes operators add support for new frequencies in new versions). MIUI).

3. Shift. IMS-profile VoLTE/5G):

• 📞 Enter #86583## (test menu) IMS).
• 🔄 Choose Disable IMS, Reboot the phone, then turn it back on.

⚠️ Warning: Mistakes in the engineering menu can lead to network loss or reset IMEI. If you are not sure, do not change the settings marked as Read Only.

7. Alternative ways of connecting to the Internet

If the mobile Internet on Phoenix has not worked, use the alternatives:

Modem mode:

• 📲 Connect your phone to another device through USB/Bluetooth/Wi-Fi (included in the settings → Access Point and modem).
• 💻 On PC, choose Phoenix as the source of the Internet.

2. Wi-Fi Calling:

• 📞 Enable in Settings → SIM-maps and mobile networks → Additionally. → Wi-Fi Calling.
• 🌐 Allows you to call and use the Internet via Wi-Fi if the mobile network is not available.

3.External 4G-modem:

• 📡 Connect. USB-modem (e.g. Huawei) E3372) through OTG-adapter.
• ⚡ B Settings → Connected devices allow data transfer.

These methods will help you stay connected until you fix the mobile internet problem.

💡

If neither method worked, the problem could be a hardware malfunction of the antenna module. On Xiaomi Phoenix, it's a common problem after falls or moisture.

FAQ: Frequent questions about setting up the Internet on Xiaomi Phoenix