How to set up the Internet TELE2 Xiaomi: A detailed guide with error solutions

Setting up mobile internet TELE2 On smartphones Xiaomi usually passes automatically – just insert SIM-The card will be loaded and the device will load the necessary parameters. 15-20% In some cases, users have problems: no connection, slow speed, or no network is defined. APN, obsolete MIUI, Dual-SIM conflicts or operator restrictions.

This article will help you understand how to manually set up the Internet TELE2 On any Xiaomi smartphone, from the budget Redmi Note to the flagship Xiaomi 14, we will look at the standard way through the settings menu, alternative methods for older versions of the firmware, as well as solving typical errors like “No Internet connection” or “Access point is not saved”. We will pay special attention to the nuances for devices with double SIM-map and those who use it TELE2 as a second operator.

1. Automatic Internet setting TELE2 Xiaomi

80% of the time, Xiaomi smartphone itself determines the parameters of the network TELE2 post-installation SIM-It takes 30 seconds to 2 minutes. This is what happens at this point:

• 📡 The device sends a request to the operator to obtain the configuration APN (Access Point Name).
• ⚙️ The operator returns the settings that are automatically applied in the system.
• 🔄 Smartphone reboots communication module (sometimes requires manual reboot).

If the automatic setting does not work, check:

⚠️ Note: On smartphones with MIUI 12 and older, the automatic setting can be blocked if the slot is SIM 1 is the card of another operator. Try temporarily retrieving the first one. SIM or swap.

To start the process manually:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose. SIM-map TELE2 (if).
3. Slip on Access Point (APN).
4. Click on the three dots in the top right corner and select Reset to default values.
5. Confirm the action and restart the device.

2. Manual tuning APN for TELE2 Xiaomi

If the automatic configuration doesn't work, you'll have to enter the parameters manually.

• 📱 Devices with custom firmware (LineageOS, Pixel Experience).
• 🔄 Smartphones after resetting to factory settings.
• 🌍 Phones purchased abroad (e.g., global Xiaomi versions for Europe).

Instructions for creating a new access point:

Enter the following settings (leave the remaining fields empty or by default):

Important: If you have a tariff with VoLTE support, add in the "Type" field APN» Ims (example: default,supl,ims) without this, calls through 4G will not work.

After preservation:

1. Select the created profile TELE2 INTERNET list.
2. Reboot your smartphone (required!).
3. Check the connection by opening your browser or running Speedtest.

💡

If, after preservation, APN missing from the list, check if the box is in front of the "Only" 3G» You can use the mobile network settings. Take it down and repeat the procedure.

3. Features of setting up on Xiaomi with two SIM-map

Xiaomi smartphones with Dual-SIM support (Redmi Note 12 Pro)+, Xiaomi 13T etc.) have nuances when setting up the Internet TELE2, If it's installed in the second slot, the main problems are:

• 🔀 Priority conflict: a device can stick to the network of the first operator, ignoring the TELE2.
• 📶 Limitation 4G: In the second slot, it is often only available. 3G (model).
• 🔄 Auto-switching: the smartphone can change arbitrarily SIM for data, knocking down settings.

Dual-SIM solutions:

⚠️ Attention: On devices with MIUI 14 and newer when activating the “Always on Data” mode SIM 1" (in the double settings SIM) internet TELE2 The second slot will not work, even if APN This bug is confirmed on the Redmi Note 12 Pro and POCO F5.

To make the Internet work for the second SIM:

1. Go to Settings. → SIM-maps and mobile networks → Data for transmission.
2. Choose. SIM 2 (TELE2).
3. Turn off the automatic option (if any).
4. In the section Network type for TELE2 set up 4G (preferably).
5. Save and restart the device.

If the speed is low (for example, instead of 4G map+), check:

• 📌 Does your model support the 4G VoLTE in the second slot (see GSMArena for information).
• 🔧 Is the power saving mode activated (it may restrict mobile data).
• 📡 Are you in the area of coverage? TELE2 4G (check on the coverage map).

4. Internet problems TELE2 Xiaomi and their solutions

Even after the right setup APN Users are faced with errors. Let's look at the most common ones and how to fix them:

If the problem persists, make a diagnosis:

1. Check the balance and activity of the tariff through USSD-request *105#.
2. Make sure that the “Flight” or “Energy Saving” mode is not activated.
3. Try inserting. SIM In another phone – if the Internet does not work there, the operator has a problem.

5. Internet setting TELE2 on older Xiaomi models (MIUI 10-11)

On devices with MIUI 10 and below (e.g. Redmi 5, Mi) A2) setting-off APN It's different, and some parameters may not be available:

• 📵 The Access Point menu may not have the option to add a new one. APN — Instead, it's a reset button.
• 🔧 Field "Typical" APN» may be called a “Connection Type” and not support multiple comma values.
• 📡 VoLTE settings can be in a separate section.

Step-by-step instructions for older versions:

1. Open the Settings. → SIM-maps and mobile networks → Access point (APN).
2. If there is a Reset button, press it and confirm it.
3. Click on three dots in the corner and select New Access Point (or Add Add) APN).
4. Fill in the fields as in Section 2, but:

Save and restart the phone.

For Xiaomi models on Android One (e.g. Mi) A3) path APN other:

Settings → Network and Internet → Mobile Network → Additional → Access Points

⚠️ Attention: On Redmi 4X Redmi Note 4c MIUI 9 after discharge APN The menu for creating a new point may disappear, in which case only updating the firmware to MIUI 11 or higher.

6. Optimizing Internet Speed TELE2 Xiaomi

If the internet is working but the speed is lower than expected, try these methods:

• 📶 Forced. 4G: customized SIM-Only install the cards 4G (switch off auto-switch 3G/2G).
• 🔄 Network reset: in Settings → The phone. → Network reset (does not delete data, only communication settings).
• 📱 Power saving shutdown: add applications (browser, messengers) to battery mode exceptions.
• 🛡️ Shutdown VPN: some VPN-Services limit the speed of mobile traffic.

To check the actual speed, use:

• 📊 Speedtest by Ookla (shows ping and jitter).
• 📈 FAST.com (from Netflix, testing streaming video).
• 📡 4GMark (graph).

If the speed is stable low (less than 5 Mbit / s with coating) 4G), contact support TELE2 through:

• 📞 Phone: 611 (free of charge).
• 💬 chat: tele2.ru/help.
• 📧 Mail: help@tele2.ru.

💡

If the speed has not increased after all the manipulations, the problem may be congestion of the base station. TELE2 Try using the Internet at other times of the day.

7. Alternative ways to set up the Internet TELE2

If standard methods don’t help, try these options:

• 📧 Customization through SMS: Send an empty message to 1234, and the configuration will come back (not working on all tariffs).
• 🔗 Import settings: download the file APN for TELE2 from apn-guru.ru and import through Settings → System system → Imports/Exports.
• 📱 Annex TELE2: Install the official operator app from Google Play – it can automatically apply the settings.

For advanced users:

If you have root access, you can manually edit the file. /data/data/com.android.providers.telephony/databases/telephony.db, where the settings are stored APN. However, this is risky – a mistake can lead to the loss of the network.

Another way is to use it. USSD-team to check status:

• *105# - Balance and status of services.
• *152# - information about the tariff.
• *545# - Internet packet management.

Frequently Asked Questions (FAQ)