How to set up the Internet on Xiaomi Poco X3: from Wi-Fi to 4G/5G

Xiaomi Poco X3 remains a popular choice among users who value performance and functionality at an affordable price, but even with such a device, it can be difficult to set up the Internet — whether it is connecting to Wi-Fi, activating mobile data or solving problems with slow speed.

The Poco X3 features support for dual 4G (Dual VoLTE) and 5G capabilities in the Poco X3 Pro/GT. But even if your model is limited to 4G, the right network configuration can significantly improve communication quality. We will look at official ways of configuring through the phone menu, as well as alternative methods for cases where standard solutions do not work.

1. Wi-Fi Connection: Basic Setup and Problem Solving

The first thing you start with is connecting to a wireless network, and on the Poco X3, you do it through a standard menu, but there are a few things you should know about:

• 📶 Automatic connection: The phone remembers the networks you previously connected to (SSID It is not broadcast, it must be added manually.
• 🔒 Type of security: modern routers use WPA3, Poco X3 older versions MIUI You may not be able to support it. WPA2-PSK.
• 📡 Ranges 2.4/5 GHz: If the router broadcasts in two bands, select 5 GHz for a higher speed (but shorter range) or 2.4 GHz for better stability in remote rooms.

To connect to Wi-Fi:

1. Open the Settings. → Wi-Fi.
2. Activate the Wi-Fi switch (if it is turned off).
3. Select your network from the list and enter your password.
4. Press Connect.

⚠️ Note: If the network is not displayed, check if the router is enabled broadcast SSID. On some Poco firmware X3 may not show networks with Cyrillic characters in the name - rename the network to Latin.

2. Mobile Internet setup (4G/5G)

If Wi-Fi is not available, mobile internet comes to the rescue. - Xiaomi Poco X3 maintain 4G+ (LTE-Advanced) with frequency aggregation, which allows speeds of up to 300 Mbps with good coverage. APN network parameters.

First, make sure that:

• 📱 SIM-The card is activated and maintained 4G (check with the operator).
• 📶 Coverage area: Check your carrier’s coverage map (for example, 2G/3G/4G on the MTS website, Beeline or MegaFon).
• 🔄 Network mode: by default, the phone can use 3G It's a power saving thing. It needs to change.

Instructions for setting:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-card (if two of them).
3. Click Network Type and install 4G (preferably) or 4G/3G/2G (auto).
4. Go back and select Access Points (APN).
5. Click on the three dots in the top right corner and select Create APN.
6. Enter your operator’s parameters (see table below).

⚠️ Note: If after setting up APN The Internet is not working, restart the phone. Sometimes the changes apply only after the reboot. Also check if the mode is activated Save traffic in Settings. → Connections and sharing.

SIM-The card is inserted into slot 1 (main card)|The network type is set to 4G|APN operator-wise|Flight mode is off.|Reboot completed after changes-->

3. Optimizing Internet Speed

Even with the right settings, the Poco X3 may be slower than expected, due to MIUI firmware, background processes or operator limitations.

• 🚀 Disabling background activity: go to Settings → Annexes → Manage applications and limit background work for unnecessary programs.
• 📊 Speed test: Use applications like Speedtest or nPerf to test the actual speed. Compare the results to your carrier's rate.
• 🔄 Network Reset: If the speed drops for no reason, reset the settings via Settings → System system → Resetting settings → Resetting network settings.

Poco X3 with MIUI 12.5+ firmware has a hidden feature called “High Speed LTE Mode” that forcibly uses all available 4G frequencies. To activate it, type ##4636### in the Phone app → Select Phone Information → Set your preferred network type → LTE only.

If you are using dualities SIM-Remember that only one of them can work in the 4G-- I'm going to change the priority:

1. Open the Settings. → SIM-maps and mobile networks.
2. Choose. SIM-The map you want to make the main one 4G.
3. Activate the Use option for mobile data.

💡

If 4G speeds drop dramatically in crowded places (metro, stadiums), try manually selecting an operator's network in Settings → Mobile Network → Network Operators. Automatic selection can connect you to congested towers.

4. Solving common Internet problems

Even after setting up properly, Poco X3 users sometimes face typical problems:

• 🔌 Internet is available, but sites do not open: check the settings DNS. Try using 1.1.1.1 (Cloudflare) or 8.8.8.8 (Google).
• 📵 Permanent communication breaks: this may be due to battery savings.Switch off Adaptive Battery in Settings → Battery.
• 🔄 4G switch off 3G/2G: Update the modem firmware through Settings → The phone. → Updating the system.

If the phone does not catch the network at all:

1. Check if it's inserted. SIM-slot-card SIM2, if he doesn't support 4G (on some modifications of Poco X3 only SIM1 full-function).
2. Make sure there is enough money on the counter (some operators block the Internet with zero balance).
3. Try inserting. SIM-card to another phone – if the problem persists, contact the operator.

⚠️ Attention: On Poco X3 NFC Sometimes there is a conflict between the modules. NFC If the Internet goes missing when you approach the payment terminal, turn it off. NFC In Settings → Connections and sharing → NFC.

5. Set up the distribution of the Internet (access point)

Xiaomi Poco X3 can work as a mobile router, distributing Internet over Wi-Fi, Bluetooth or USB, it is convenient for connecting a laptop, tablet or other phone.

• 🔗 Wi-Fi hotspot: the most versatile way, but quickly puts the battery down.
• 🔌 USB-Modem: Suitable for PC, provides stable connection and charges phone.
• 📶 Bluetooth modem: slower Wi-Fi, but more energy efficient.

To set up the distribution:

1. Go to Settings → Connections and Sharing → Modem Modem.
2. Select the Dispensing Type (Wi-Fi Access Point, USB-modem).
3. For Wi-Fi, set up a network name (SSID) and password (minimum 8 characters).
4. Activate the Wi-Fi Access Point switch.

If your devices are not connected to your access point:

• Check that the phone is on mobile Internet.
• Make sure that the number of connected devices does not exceed the limit (usually 8-10).
• Try changing the frequency range to 2.4 GHz (in the access point settings) if the connected device does not support 5 GHz.

💡

When you distribute internet via USB, your phone may not charge from some laptops. Use the original cable or connect the charger in parallel.

6. Advanced settings for experienced users

If standard methods fail, you can try deeper settings, and be careful: these actions require an understanding of the consequences and can cause the phone to malfunction.

Change the modem parameters through the engineering menu:

1. Enter the phone app code ##4636##.
2. Select Phone Information.
3. Scroll down to Set your preferred network type.
4. For maximum speed, select LTE only (but this will turn off 2G/3G calls).

Manual update of operator configuration:

• Download the latest version of Carrier Services from Google Play.
• Update the Google Play Services app.
• Reboot the phone.

Disable IPv6 (if there are connection problems):

1. Go to Settings → Mobile Network → Access Points (APN).
2. Select your APN and in the APN Type field add,ipv4 at the end (e.g. default,supl,ipv4).
3. Save and restart the phone.

⚠️ Warning: Changing the settings of the engineering menu can disrupt the network. If the Internet is lost after the experiments, reset the network settings or return the modem settings to the default values.

7. Alternative ways of connecting to the Internet

If standard methods don’t work, consider alternatives:

• 📡 USB-Tethering from another device: connect Poco X3 down USB to another phone or PC with the Internet and turn on modem modem on the main device.
• 🔄 Bluetooth tetering: similarly USB, It's going to be slower, but it's going to be enough for messengers.
• 🌍 Public Wi-Fi: Use applications like WiFi Map to find the nearest open network (but be careful with security!).
• 📶 Outside 4G-Modem: If the operator signal is weak, connect the phone to an external modem via Wi-Fi.

For USB-tetering:

1. Get Poco on. X3 to another device through USB-cable.
2. On the main device (for example, laptop) turn on modem modem.
3. On Poco X3, select USB Data Transfer in the USB settings (you may need to install drivers on your PC).

If you use public Wi-Fi frequently, install a VPN (like ProtonVPN or Windscribe) to protect your data from being intercepted.

FAQ: Frequent questions about setting up the Internet on Poco X3