How to set up the Internet on a Xiaomi Mi TV: from connection to troubleshooting

Xiaomi Mi TVs offer a lot of options for viewing content, but without the right Internet connection, most of the features will remain unavailable. Whether you just purchased a new Mi TV or encountered connection problems on an old device, this guide will help you set up the network as efficiently as possible. From basic Wi-Fi or cable connection to solving common errors, we will cover all the nuances.

It’s important to understand that a stable Internet connection affects not only 4K HDR video streaming, but also voice assistant, system updates, and even app download speeds from Google Play. In this article, you’ll find step-by-step instructions with illustrations (for key points), connection type comparison tables, and answers to frequent user questions.

1. Selecting Connection Type: Wi-Fi vs Ethernet

Before you start setting up, decide which type of connection is right for you. Each option has pros and cons depending on your tasks:

• 📶 Wi-Fi – convenient for most users, requires no wires, but can suffer from interference and limited speed over long distances from the router.
• 🔌 Ethernet (Cable) – provides maximum stability and speed, ideal for 4K- content and online gaming, but tethers the TV to the location.

For Xiaomi Mi TV with Wi-Fi 6 support (Mi TV Q2 2023 and later), wireless connection may not be inferior to cable speed if the router also supports this standard. However, for older models (Mi TV 4S 2018), it is better to use wire - especially when watching high-resolution video.

⚠️ Warning: If your Mi TV supports Wi-Fi 5 (802.11ac) but the router is running Wi-Fi 4 (802.11n), the connection speed will automatically be limited to 300-450 Mbps, even if the provider's fare is higher. Check the router's settings!

2. Wi-Fi connection: step-by-step instructions

Most users choose a wireless connection. Consider the connection process using the Xiaomi Mi TV A2 43" (the interface may differ slightly for other models):

1. Turn on the TV and press the Settings button on the remote.
2. Go to Network & Internet → Wi-Fi.
3. In the list of available networks, select yours. If you don't have a network, press Refresh.
4. Enter the Wi-Fi password. For convenience, use the virtual keyboard on the screen or the Mi Remote app on your smartphone.
5. Confirm the connection. In 5-10 seconds, the signal-level Wi-Fi icon will appear in the upper right corner.

If the TV is not connected:

• 🔄 Restart the router (turn off power for 30 seconds).
• 📱 Check if the router is running Hidden SSID mode, which must be turned off or manually added to the TV network.
• 🛡️ Make sure that parental controls or MAC- filtering on the router are not activated.

The router is on and gives the network away.|

Wi-Fi password entered correctly |

The TV is within range of the network (not further than 10 m from the router)|

The router has only 5GHz mode disabled (if the TV does not support this frequency)-->

On Xiaomi Mi TV P1 and later, when you first connect to Wi-Fi, the system may suggest updating the firmware. Don't refuse - this will fix possible network bugs.

3. Configuring a wired connection (Ethernet)

To connect via cable, you will need:

• 🔌 LAN- Cat 5e or higher (length up to 100 m).
• 📡 Free Ethernet port on the router.

Instructions:

1. Connect one end of the cable to the LAN port on the back of the TV, the other to the router.
2. Go to Settings → Network & Internet → Ethernet.
3. Select DHCP (Automatic IP Receiving) or enter the settings manually if the provider requires static IP.
4. Wait for the Connected message (usually 2-3 seconds).

If the connection is not established:

• 🔄 Try another cable -- often the problem is in damaged veins.
• 🔧 Check if the port indicator LAN is on the router.
• 📋 Make sure that the DHCP- server is not disabled in the router settings.

Wi-Fi|

Ethernet (cable) |

Both of them in situation |

Not yet plugged in.-->

4. Optimizing Internet Speed on Xiaomi Mi TV

Even after a successful connection, the speed may be lower than expected.

• 📶 Change the Wi-Fi channel on the router. Channels 1, 6, 11 (for 2.4 GHz) are usually less loaded. For 5 GHz, choose channels 36-48 or 149-165.
• 🔄 Update the router's firmware. Outdated versions often have device-connected bugs.
• 📵 Turn off the power saving on TV: Settings → Device Preferences → Power → Sleep → Never.
• 🛡️ Set up QoS on your router to prioritize your TV traffic (especially for 4K- content).

To check the actual speed:

1. Install the Speedtest by Ookla app from Google Play.
2. Run the test and compare the results with the speed of the provider.

💡

If the Wi-Fi speed is lower than 100 Mbit/s, try switching the TV to the 5 GHz band. To do this, in the Wi-Fi settings on TV, select a network with the 5G suffix (for example, MyWiFi_5G).

5. Solving common Internet problems

If the TV is not connected to the network or the connection is unstable, use this instruction:

🔴 Problem: TV doesn't see Wi-Fi network

• 🔧 Check if the router's Wi-Fi distribution is enabled.
• 📡 Make sure the TV supports your network frequency (e.g. Mi TV 4A does not work with Wi-Fi 6E).
• 🔄 Reboot the TV: Press the Power button on the remote for 10 seconds.

🟡 Problem: Connection is available, but no internet access

• 🌐 Check the settings of DNS on TV: Settings → Network & Internet → Wi-Fi → [your network] → Advanced → DNS.
• 🔧 Disable VPN or the proxy on the router.
• 📋 Make sure that the provider has sufficient funds in his account.

🟢 Problem: Slow application loading

• 📱 Clear the cache of Google Play: Settings → Apps → Google Play Services → Clear Cache.
• 🔄 Switch to a wired connection.
• 🛡️ Turn off the background download of updates: Settings → Apps → Auto-update apps → Off.

⚠️ Warning: Xiaomi Mi TV models with firmware below MIUI TV 3.0 may not support modern Wi-Fi encryption standards (e.g. WPA3). In this case, on the router, temporarily turn on WPA2-PSK.

6.Static IP configuration and advanced parameters

For power users who want to ensure maximum connection stability, it is recommended to configure a static IP- address. This is especially useful if you use:

• 🎮 Online games via Google Stadia or NVIDIA GeForce NOW.
• 📺 IPTV with reference to MAC- address.
• 🔒 Remote access to TV via ADB.

Instructions for setting up static IP:

1. Find out MAC- TV address: Settings → About → Status → MAC address (Wi-Fi).
2. Reserve the IP- address for this MAC on the router (under the DHCP Reservation or Static Lease section).
3. On your TV, go to Settings → Network & Internet → Wi-Fi → [your network] → Advanced.
4. Select Static and enter data: IP- Address: 192.168.1.100 (example) Gateway: 192.168.1.1 Mask: 255.255.255.0 DNS1: 8.8.8.8 DNS2: DNS2: 1.1.1.1

To check the connection, use the ping command via ADB:

adb shell ping -c 4 google.com

💡

Static IP fixes the floating connection problems, but requires manual adjustment. If you're not sure about the parameters, use Automatic Mode (DHCP).

7 Mobile Internet Use (USB-tetering)

If you don't have Wi-Fi or wired Internet, you can connect Xiaomi Mi TV to the network via your smartphone.

1. Turn on the modem modem on the smartphone (USB-tetering).
2. Connect your phone to your TV via the USB- cable (use the USB 3.0 port for better speed).
3. On TV, select a USB source and confirm the connection.

Limitations of the method:

• 📱 Speed is limited by the mobile operator's tariff.
• 🔋 Quickly drains the smartphone battery.
• 📵 Not all Xiaomi Mi TV models support USB-tetering (tested for Mi TV Q1E and later).

⚠️ Warning: When using the mobile internet to view 4K- content, traffic can reach 7-15 GB per hour. Turn off autoplay video in the application settings.

FAQ: Frequent questions about setting up the Internet on Xiaomi Mi TV