How to set up the Internet on Xiaomi: the complete guide

A modern smartphone is impossible to imagine without constant access to the global network, and devices from Xiaomi are no exception. Users often face a situation when after buying a new gadget or changing the phone. SIM-The card does not automatically configure, leaving the owner without communication. In such cases, you need to know how to set up the Internet on Xiaomi manually to regain access to instant messengers, maps and social networks.

The setup process can vary depending on the carrier and device model, whether it is a budget Redmi or flagship Xiaomi. MIUI system installed on these smartphones has its own features in the organization of menus and network connections management. Understanding these nuances will allow you to quickly troubleshoot and ensure stable mobile data.

In this article, we will discuss in detail all the stages of configuration, from basic parameters to solving complex problems with the help of the user. APN. You will learn what settings to enter for different operators and how to avoid typical errors that block access to the network. 4G/LTE old SIM-Cards often need to be replaced by the operator, as the software configuration will not add support for new frequencies.

Basic mobile network setup

The first step is always to check the physical connection. SIM-Make sure the SIM card is in the right slot if there are two and the phone sees it. Without that, further manipulation of the software menu makes no sense.

To activate the Internet, lower the swipe notifications from top to bottom. Find the Mobile Internet or Data Transfer icon and make sure it's blue. If the icon is grey, click on it to activate. → SIM-maps and mobile networks and switch the slider to the active position.

It is important to choose the right one. SIM-a data card if there are two in the phone. Go to the settings menu SIM-In the mobile Internet, specify the operator you want, which is a common mistake when users try to set up the Internet on one card and traffic tries to go through another.

When you turn on the data, the 4G, H+ or E icon should appear on the screen. If you see an E (EDGE) icon, then the speed will be low, and it is worth checking the coverage area or network settings. In most cases, the system itself tightens the basic parameters, but sometimes manual intervention is required.

Manually configuring the APN access point

If the automatic setting doesn’t work, you’ll have to manually create an access point. APN (Access Point Name is the most common way to solve problems with the lack of Internet on Xiaomi. First go to the Settings menu → SIM-maps and mobile networks.

Choose. SIM-map that does not have internet and click on the "Access Point Names (APN)». In the list that opens, click the New Access Point button (usually a plus in the bottom corner) and you will see a form that you need to fill in your operator’s data.

In the Name field, enter any convenient name, such as MTS Internet. In the APN (or Access Point) field, you need to enter the exact value that depends on the operator. The remaining fields, such as username and password, are often left blank, but for some operators they may be mandatory.

Once you have entered all the data, be sure to click "More" (three dots in the corner) and select "Save." Then go back to the list of access points and check the box against the record you created. Without saving and selecting a new point, access to the network will not appear.

APN options for popular operators

So you don't have to search for information on carrier sites, we've put up-to-date data for the largest providers in a handy spreadsheet. Use these values when manually configuring the hotspot on your Xiaomi or Redmi.

Please note that for some plans, especially corporate or archival, the settings may differ, in which case it is best to call the operator’s support and request the current APN settings for your number.

After entering the data, remember to save the profile and activate it. If the Internet does not work immediately, try to turn on the flight mode for 10 seconds and turn it off so that the phone re-registers with new parameters.

Setting up a Wi-Fi connection

Setting up a wireless Wi-Fi network on Xiaomi smartphones is usually easy, but it has its hidden capabilities. To connect, go to Settings → Wi-Fi and turn on the module. Select your network from the list and enter your password.

However, if you want to get the best speed or solve connection problems, it is worth looking at the advanced settings. Click on the arrow next to the network name or select "Configure" (depending on the version of MIUI). Here you can change the IP settings from DHCP to Static if the router requires a fixed address.

⚠️ Attention: When changing IP-Addresses to static make sure you know the gateway address and DNS. Mistakes in data will result in loss of access to the local network and the Internet.

You can also set up a proxy server on this menu if you're on a corporate network or using specific tools to work with, and for normal home use, it's best to leave these settings unchanged so you don't create conflicts.

💡

Use the Wi-Fi Assistant feature in the settings to automatically switch to mobile internet if the Wi-Fi signal becomes too weak.

Solving the problems with 4G and LTE

A common problem is the operation of the phone in mode 3G or E, when the coating 4G Xiaomi has a separate menu of the preferred network type. → SIM-maps and mobile networks → Choose. SIM → Preferred type of network.

In this list, select the option “Preferred” LTE» or «4G». If there is no such item or it is inactive, it may be yours. SIM-card does not support 4G, Or the operator at that location doesn't provide coverage, and check if traffic saving mode is on, which may restrict background data transmission.

Sometimes it helps to reset the network to factory settings. This action will delete all stored Wi-Fi passwords and Bluetooth settings, but often solves the software glitches of the communication module. You can find this option by Settings → Connection and Sharing → Reset Wi-Fi, mobile networks and Bluetooth.

Additional settings and optimization

MIUI has an aggressive power saving system that can block the Internet from running in the background for some applications. To avoid this, go to the battery settings and find the application you want, make sure it has background activity and no limits.

Also worth checking is the date and time settings. An incorrect date can cause security certificate errors, causing browsers and apps to say that there is no Internet connection, even though the network is working.

For advanced users, a hidden test of network speed and quality is available. Although standard MIUI tools are limited, installing third-party utilities to monitor the signal will help you understand whether the problem is on the phone or on the side of the operator tower.

💡

If resetting network settings and rechecking APN didn’t help, the problem could be on the operator’s side or in a physical malfunction of the smartphone’s antenna.

⚠️ Warning: Do not install questionable "signal amplification" applications from unknown sources, they often contain ads and viruses, and have no real effect on the hardware of the antenna.

Frequently Asked Questions (FAQ)