Set up the Internet on Xiaomi TV: from connection to troubleshooting

Xiaomi TVs with Android operating system TV Google TV Require a stable Internet connection for full-fledged work: from streaming 4K-However, many users have difficulty connecting to the first or after resetting.This article will help you understand how to properly set up the Internet on Xiaomi Mi. TV, Redmi Smart TV or other brand models – from basic connectivity to solving complex network problems.

We will look at all the available ways of connecting: Wi-Fi, Ethernet (cable) and even mobile Internet via the Internet. USB-We will pay special attention to typical errors such as "Connection fails" or "IP-Address not received, as well as speed optimization for streaming Netflix, YouTube and Kodi. If your Xiaomi TV doesn’t see the network or constantly loses connection, here you will find proven solutions.

1. Selection of connection method: Wi-Fi, cable or mobile Internet?

Before you start setting up, decide which type of connection is right for you. Each option has pros and cons:

• 📶 Wi-Fi is convenient, but depends on the distance to the router and interference, suitable for most users, if the router supports the standard. 802.11ac (or newer) and located no further than 10 meters from the TV.
• 🔌 Ethernet (Cable) is the most stable connection for the 4K-streaming and online gaming.Recommended if your Xiaomi TV is located near the router or there is a possibility to lay a cable.
• 📱 Mobile Internet (USB-modem: backup if no other networks are available; speed depends on operator and tariff, additional adjustment may be required.

For most modern models (Xiaomi TV A2, Redmi Smart TV X, Mi TV Q2), Wi-Fi 5 GHz is a priority – it provides lower latency and high speed. However, if your router does not support this range, you can use 2.4 GHz, but with possible interference from other devices.

⚠️ Warning: If you connect your TV through powerline adapters, make sure both adapters are connected to the same phase, otherwise the speed will be extremely low or the connection will not be established at all.

2. Connecting Xiaomi TV to Wi-Fi: step-by-step instructions

This is the most common way to set up the Internet.

1. Turn on the TV and go to Settings → Network and Internet.
2. Select Wi-Fi and turn on the wireless network if it is disabled.
3. In the list of available networks, find your router's name (SSID). If the network is not listed, click Update or check if the router's Wi-Fi is turned on.
4. Enter your network password. If you're using WPA3 and your TV doesn't support it, switch your router to WPA2-PSK.
5. Wait a few seconds for the TV to come in. IP-address and connect to the network.

If after entering the password there is an error "Authentication failed", check:

• 🔄 Correctness of the entered password (registrar is important!).
• 🛠️ Router settings: disable filtering by MAC-address, if it is included.
• 📡 Wi-Fi Range: Some Old Xiaomi Models TV (Like Mi. TV 4A 2018) does not support 5 GHz.

Make sure the router is on and distributes the network |

Check that the TV is in Wi-Fi coverage |

Turn off VPN or proxy on the router |

Update the TV firmware to the latest version-->

If your Xiaomi TV doesn’t see a 5GHz network, but the router is giving it away, try manually specifying the channel in your router settings (for example, 36 or 48) – some TVs don’t scan all available channels automatically.

3. Configuring a wired connection (Ethernet)

The wired connection provides maximum stability, which is critical for the 4K HDR-content or online games via Google Stadia. to connect Xiaomi TV cable-wire:

1. Connect the Ethernet cable from the router to the LAN port on the TV (usually located on the back).
2. Go to Settings → Network and Internet → Ethernet.
3. If the connection is not automatically established, select Setting manually and specify: IP-address (e.g. 192.168.1.100) Gateway (usually 192.168.1.1) DNS (You can use 8.8.8.8 from Google or 1.1.1.1 from Cloudflare)

If after connecting the cable the TV says "Cable is not connected", check:

• 🔌 Integrity of cable and connectors (try another cable).
• 🔄 Restart your router – sometimes port LAN "hanging".
• 🛠️ Router settings: Make sure the port is not disabled in the web interface (usually at 192.168.1.1).

Wi-Fi 2.4 GHz|

Wi-Fi 5 GHz|

Ethernet (cable) |

Mobile Internet (USB-modem)|I'm not connecting to the Internet.-->

4. Connection via mobile Internet (USB-modem)

If you do not have access to Wi-Fi or a wired network, you can use it. USB-modem (e.g. from Megafon, Beeline or Yota:

1. Connect the modem to USB-TV port (it is advisable to use the port) USB 3.0, if there is one).
2. Go to Settings → Network and Internet → Mobile Network.
3. Select your carrier from the list or set up your APN manually (options can be found on the operator’s website).
4. Wait for the connection. The speed will depend on the signal strength and the tariff.

Please note:

• 📶 Not all Xiaomi models TV support USB-Check compatibility in the TV instructions.
• 🔋 The modem will consume energy from USB-port of the TV, which can lead to overheating with prolonged use.
• 💰 Check with the operator whether the Internet is turned on for USB-modems in your tariff (sometimes a separate option is required).

⚠️ Note: If after connecting the modem, the TV says "Device not recognized", try using the device. USB-externally powered hub – some modems require more power than a TV port can provide.

5. Optimizing Internet Speed for Streaming and Gaming

Even if the TV is connected to the network, the speed may not be enough for comfortable viewing. 4K-Video or online gaming. Here's how to improve productivity:

To check the current speed:

1. Install the Speedtest by Ookla app from Google Play.
2. Run the test and compare the results with your provider’s rate.
3. If the speed is less than 30% below the stated speed, contact technical support.

💡

If you watch often 4K HDR-In the router settings, enable QoS (Quality of Service) and prioritize the device with the MAC-address of your Xiaomi TV. This will reduce delays in streaming.

6. Solving Common Internet Problems

If the TV is not connected to the network or the connection is constantly broken, use this instruction:

• 🔄 "Connection fails": Restart router and TV. Check if the router is on Client Isolation. Reset network settings on TV: Settings: Settings → System system → Reset → Resetting network settings.
• 🌐 "IP-Address not received: In the router settings, turn on DHCP (If it's off, set the TV to static. IP-Check if the number of connected devices is exceeded (some providers have a restriction).
• 📵 TV doesn't see the network: Make sure the network isn't hidden (SSID Try connecting to the network from another device (smartphone or laptop). Update the TV firmware: Settings → On TV. → Updating the system.

If none of these methods worked, there may be a problem with the TV hardware (e.g., a faulty Wi-Fi module).

7. Additional settings for experienced users

For those who want to optimize the network on Xiaomi TV, there are advanced options available:

• 🔧 Change of change MTU: If the internet is not stable, try to reduce the MTU (Maximum Transmission Unit (up to 1472): Settings → Network and Internet → [connection] → Additionally. → MTU
• 🛡️ Set up a proxy: If your ISP blocks access to certain services (e.g. Disney)+), You can configure a proxy: Settings → Network and Internet → [connection] → Additionally. → Provide the address and port of the proxy server (for example, proxy.example.com:8080).
• 📡 Traffic Prioritization (QoS): Add to the router in QoS settings MAC-The TV address is in priority devices, which will help to avoid lags when streaming.

💡

If you use a VPN on a router, make sure the VPN protocol is supported by Xiaomi TV. Some models do not work with OpenVPN, but function normally with PPTP or L2TP.

FAQ: Frequent questions about setting up the Internet on Xiaomi TV