You’re trying to transfer a photo from your phone to the big screen, but Wi-Fi Direct is on your Xiaomi TV Does he not want to find devices? Or can't find this feature on the menu at all? TV, This article presents the current ways to enable Wi-Fi Direct for all Xiaomi models (including Mi). TV 4A, 5 Pro, P1 new series 2023-2026 years), and also solutions of typical connection errors.
Wi-Fi Direct allows you to connect your TV to other gadgets (smartphones, laptops, cameras) directly, without a router, and it's convenient for broadcasting a screen, watching photos/video from your phone, or even using TV as a presentation monitor. MIUI TV The manufacturer has hidden the settings so that it's almost impossible to find them without instructions, and we're going to show you all the working methods, from the standard menu to the hidden engineering commands.
What is Wi-Fi Direct and Why You Need It on Xiaomi TV
Wi-Fi Direct is a wireless protocol that creates a direct connection between two devices without a router. On Xiaomi TVs, this technology is used to:
- 📱 Screen broadcasts from a smartphone (Miracast, Screen Mirroring)
- 📷 Viewing photos/video from your phone or camera on a big screen
- 🎮 Gamepad connections (e.g., Xiaomi Game Controller)
- 💻 Use TV as a laptop monitor (via Miracast)
- 🔊 Streaming music from phone to TV columns
What's different from classic Wi-Fi is that it doesn't require a home network connection, it creates the hotspot itself and connects directly, and it can transfer data up to 250 Mbps (depending on the TV and smartphone model). TV 5 Pro and newer is supported even Wi-Fi Direct 5 GHz, which reduces delays when streaming video.
⚠️ Note: On some Xiaomi models TV (Like Mi. TV 4S 32") Wi-Fi Direct only works in 2.4 GHz mode. If your smartphone is connected to a 5 GHz network, temporarily switch to 2.4 GHz or turn off Wi-Fi on your phone before searching for devices.
The main advantage over Bluetooth is high data transfer speed (up to the 10x faster, and before DLNA — There's no need for a shared network:
| The benefits of Wi-Fi Direct | Cons of Wi-Fi Direct |
|---|---|
| ✅ No router dependency. | ❌ High battery consumption on a smartphone |
| ✅ High transmission speed (up to 250 Mbit / s) | ❌ Limited distance (up to 10 meters) |
| ✅ Full support HD and 4K streaming | ❌ Possible lags with a weak signal |
| ✅ Compatible with most modern devices | ❌ On some models, Xiaomi requires manual activation. |
Where is Wi-Fi Direct in the Xiaomi menu? TV: step-by-step
Depending on the TV model and version MIUI TV The path to Wi-Fi Direct settings may vary.We have compiled up-to-date instructions for all popular Xiaomi series (including Mi). TV 4/4A/4S/5/5 Pro/6/P1/Q1/Q2).
If you have a TV of 2020 or newer (C) MIUI TV 3.0+), Keep an eye out for changes in the interface: the manufacturer regularly moves menu items. Below are proven paths for the latest firmware versions.
Method 1: Standard path (for the MIUI TV 2.0–4.0)
This method works on most models, including the Mi. TV 4A, 4S, 5 and 5 Pro:
- Turn on the TV and press the Menu button on the remote (or Settings on the screen).
- Go to the Settings section → Network and Internet.
- Select Wi-Fi Direct (some models call it Direct Connection or Miracast).
- Activate the slider Enable Wi-Fi Direct.
- Click Device Search and select your smartphone or other device from the list.
If Wi-Fi Direct is not in the Network and Internet section, check Connected Devices or Screen (for Miracast). TV Q1/Q2 The function can be hidden in the settings → System system → Additionally.
Method 2: For new models (MIUI TV 4.0+)
On Xiaomi TVs 2022-2026 (e.g. Mi) TV 6, P1, Q2) The interface has changed. Here's the actual path:
- Open the settings (cog in the upper right corner).
- Select Connections and Sharing.
- Go to Wi-Fi Direct/Miracast.
- Turn on the function and wait for the name of your TV to appear in the list of available devices on your smartphone.
Some firmware may call it Wireless Display or Screen Broadcast, and if you don't find it, search for settings (a magnifier at the top of the screen) and type in a Wi-Fi Direct request.
Turn on Wi-Fi on your TV and smartphone|Update the TV to the latest version|Make sure the distance between the devices < 5 meters|Shut down. VPN on a smartphone (can block the connection)|Reboot both devices if you have trouble finding them-->
Method 3: Through the Engineering Menu (if the function is hidden)
If Wi-Fi Direct is not on the menu or is inactive, it may be disabled at the firmware level, and the engineering menu will help:
- On the remote, press sequentially: Menu → Settings → All settings → About the device.
- Find the item Version. MIUI TV Quickly press it 5 times in a row (like on Xiaomi smartphones).
- You'll open a developer menu. Select network settings. → Wi-Fi Direct.
- Turn on the function and restart the TV.
On some models, the Mi TV 4X) Instead, the team works through ADB:
adb shell settings put global wifi_direct_enabled 1To do this, you will need a computer with installed ADB Tools and included debugging by USB TV-wise.
What to do if the engineering menu is not opened?
How to connect a smartphone to Xiaomi TV via Wi-Fi Direct
Now that the feature is activated on the TV, it remains to connect it to a smartphone.The instruction is suitable for Android devices (including Xiaomi, Redmi, POCO) and iOS (iPhone).
For Android smartphones (Miui 12-14, Android 10-14)
On Xiaomi phones, the process is as simple as possible:
- Open Settings → Connections and Sharing → Wi-Fi Direct.
- Turn on the feature and wait for your TV name to appear on the list (e.g. MiTV-XXXXX).
- Click on the TV name and confirm the connection.
- There will be a request for confirmation on the TV - agree.
After the connection, you can:
- 📲 Broadcast the screen via Screen Mirroring (in the notification curtain)
- 📂 Send files via Mi Share or Google Files
- 🎮 Play games with big screen output (with support for gamepad)
If your smartphone doesn’t see the TV:
- ✅ Reboot both devices.
- ✅ Make sure that the TV is enabled Detection Mode (in the Wi-Fi Direct settings).
- ✅ Turn off the power saving mode on your smartphone (it can block scanning).
For iPhone (iOS 14–17)
On the iPhone, Wi-Fi Direct works through Screen Mirroring:
- Open the Control Point (swipe down from the upper right corner).
- Press the screen duplication (the icon with two rectangles).
- In the list, select your Xiaomi TV (The name must match what is displayed in the TV settings).
- Enter. PIN-code, if requested (displayed on the TV screen).
⚠️ Note: You can’t transfer files over Wi-Fi Direct on your iPhone, just duplicate the screen. Use AirPlay (if the TV supports) or cloud services (iCloud, Google Photos) to transfer photos/video).
If the iPhone can't see the TV:
- 🔄 Restart the router (sometimes the background connection to the network interferes).
- 📱 Update iOS to the latest version.
- 🔌 Connect your iPhone to another Wi-Fi network (like mobile internet) and try again.
💡
If the connection is permanently broken, try turning off the “Smart Connect” function in the router settings (it automatically switches devices between 2.4 GHz and 5 GHz, which interferes with Wi-Fi Direct).
The solution to the problem: Wi-Fi Direct does not work on Xiaomi TV
Even after setting up the right Wi-Fi Direct can fail.-10 Reasons and solutions for Xiaomi TVs based on user feedback and official customer service recommendations.
| Problem. | Reason. | Decision |
|---|---|---|
| TV doesn't see a smartphone | The smartphone is connected to 5 GHz, and the TV supports only 2.4 GHz | Switch your smartphone to 2.4 GHz or turn off Wi-Fi on it |
| The connection breaks in 10–30 seconds. | Active energy saving mode on TV or phone | Turn off energy saving in the settings of both devices |
| Wi-Fi Direct is not available on the menu | Outdated firmware or regional restrictions | Update TV or change region to India in settings |
| Low transmission speed, lags during streaming | Interference from other wireless devices | Move your router away from TV or change your Wi-Fi channel in its settings |
| Requirement PIN-code doesn't appear | Failure in Wi-Fi Direct service | Reset network settings on TV: Settings → Network → Reset |
Error "Unable to connect" or "Device unavailable"
This is the most common problem. Causes and solutions:
- Protocol incompatibility: Make sure both devices support Wi-Fi Direct (some budget smartphones may only have Miracast).
- Antivirus Block: On Android, check if the connection is blocked by an antivirus (e.g., Avast or Kaspersky).
- Conflict IP-Addresses: Manually assign static IP on TV: Settings → Network → Settings IP → Manually.
If nothing helps, reset the network on the TV:
- Go to Settings → Network and Internet → More.
- Select Network Resetting.
- Confirm the action and restart the TV.
Wi-Fi Direct is turned on but does not find devices
The problem often arises in the Mi TV 4A and 4S after the updates:
- 📶 Region TV: In settings (Settings) → General. → Region) Select India or the United States – some regions have Wi-Fi Direct turned off by default.
- 🔄 Wi-Fi Channel: If you have a dual-band router, force channel 6 or 11 to 2.4 GHz settings.
- 🛠️ Reset to factory: The last method - reset TV to factory settings (Settings) → About the device → Reset).
💡
If Wi-Fi Direct still doesn't work after reset, check the date and time on your TV. Incorrect settings can block network functions due to security certificate issues.
Alternatives to Wi-Fi Direct for Xiaomi TV
If you can’t get Wi-Fi Direct to work, consider alternative ways to connect:
| Method | Pluses | Cons | How to set up |
|---|---|---|---|
| Screen Mirroring (Miracast) | ✅ It works without a router.✅ Keeps the sound going | ❌ Lags at low signal❌ Not all apps support all apps | On TV: Settings → Screen. → Miracast On Phone: Settings → Connections → Screen broadcasting |
| DLNA | ✅ Stable connection✅ Support for most formats | ❌ Requires a shared Wi-Fi network❌ No screen duplication | Install Mi Home or LocalCast on your smartphone |
| Google Cast | ✅ Support for YouTube, Netflix✅ Minimum delays | ❌ Demands a router.❌ Not all Xiaomi models support all of them. | On TV: Settings → Annexes → Google Cast |
| HDMI-cable | ✅ No delay.✅ Maximum quality | ❌ Wired connection❌ Need an adapter for a smartphone | Connect the cable to the port HDMIARC TV |
To view photos / videos from your phone, the easiest way to use Mi Home is to:
- Install the Mi Home app on your smartphone.
- Add the TV to the app (it must be connected to the same Wi-Fi network).
- In the Devices section, select TV and click Send Files.
To stream the screen from the iPhone to Xiaomi TV Wi-Fi Direct-free:
- Use Apple. TV (plug him in. HDMI-port).
- Or install the AirScreen app on your TV (available in Mi) TV App Store).
Update: if Wi-Fi Direct disappears after the update
Many users complain that after the update MIUI TV Wi-Fi Direct disappears from the menu or stops working, and it's about firmware optimizations, where the manufacturer removes the "extra" features to save resources:
How to check the firmware version
Find out the current version of the software:
- Open the Settings. → About the device.
- Scroll to the item Version MIUI TV.
- Write down the version number (for example, MIUI TV 3.0.123).
Current versions at the time of 2026:
- Mi TV 4A/4S: MIUI TV 2.0–3.0
- Mi TV 5/5 Pro: MIUI TV 3.0–4.0
- Mi TV 6/P1/Q2: MIUI TV 4.0+
How to update firmware manually
If automatic updates do not help:
- Download the latest firmware for your model from the official Xiaomi Support website.
- Copy the update.zip file to a flash drive (formatted in FAT32).
- Connect the flash drive to USB-television-port.
- Go to Settings. → About the device → Updating the system → Update through USB.
- Select the file and wait for the installation to be completed (TV will reboot automatically).
⚠️ Note: If after updating Wi-Fi Direct still does not work, and new bugs (for example, interface brakes) appear in the firmware, you can roll back to the previous version. USB. However, note that rollbacks can reset all TV settings.
List of stable firmware versions for popular models:
- Mi TV 4A 32": MIUI TV 2.0.185 (stable)
- Mi TV 5 Pro: MIUI TV 3.0.144 (with Wi-Fi Direct 5 GHz support)
- Mi TV Q1: MIUI TV 4.0.88 (Miracast bugs fixed)
💡
Before updating the firmware through USB Turn off the TV from the Internet (pull out the network cable or turn off Wi-Fi) and prevent the new version from automatically downloading on top of your TV.
Resetting: The last resort if nothing helps
If all attempts to turn on Wi-Fi Direct failed, the TV would be completely reset to factory settings, which would delete all installed apps, accounts and personal data, but often solve network function problems.
How to reset Xiaomi TV:
- Open the Settings. → About the device → Reset.
- Choose Reset all settings (or Restore factory settings).
- Enter. PIN-code (by default 0000 or 1234 if you have not changed it).
- Confirm the action and wait for the reboot (it will take 3-5 minutes).
After discharge:
- 🔧 Set up your TV as new (select language, connect to Wi-Fi).
- 🔄 Check for Wi-Fi Direct on the menu.
- 📱 Try to connect the smartphone again.
⚠️ Note: On some models (Mi) TV ES 2021) Reset may result in the blocking of your Mi Account if the TV was linked to your account. To avoid this, unplug the TV in the Mi Home app before reset: Open Mi Home on your smartphone. → Settings of the device → Remove the device.
If Wi-Fi Direct still doesn’t work after reset, there’s probably a hardware problem (e.g., a faulty Wi-Fi module) in which case, contact Xiaomi’s service center or check the warranty.
💡
Before reset, save a list of installed applications. Once restored, they can be quickly reinstalled via Mi. TV App Store → My apps.