Modern Xiaomi Smart TVs are powerful multimedia centers, but their functionality is fully revealed only when you have an active connection to the global network. Without the Internet, you lose access to streaming services, online cinemas, the ability to install new applications and voice control. The setup process is usually intuitive, but there are nuances in the Android TV operating system or PatchWall proprietary shell that can cause difficulties for inexperienced users.
In this article, we will take a look at all the ways your TV can connect to your router, whether it’s a Wi-Fi wireless network or a wired LAN connection. You’ll learn how to enter network settings correctly, what to do if the device can’t see the router, and how to check the actual connection speed. Proper setup at the initial stage will save you from problems with video buffering and interface lags in the future.
Before starting the procedure, make sure that your router is on and is giving a signal, and that you know the password from your home network. MAC-Prepare the data to register a new device, remember that the stability of the Smart functions depends on the quality of the signal and the correctness of the settings entered. DNS.
Preparation of equipment and signal verification
Before you go to the menu of the TV, you need to make sure that the network equipment is working properly. Often the problem lies not in the settings of the Xiaomi Mi TV, but in the overload of the router or the break of the provider's cable. Check the indicators on the router: whether the WAN or Internet light bulb is on, whether the wireless indicator is active.
If you plan to use a wired connection, check it out. LAN-For wireless connection, make sure that the TV is in the zone of confident reception. The distance to the router should not exceed reasonable limits, especially if 5GHz frequencies are used, which have a shorter range but a higher speed.
⚠️ Note: If the router is behind thick concrete walls or metal structures, the 5GHz signal may be unstable.
It's also worth checking to see if the connected device limit on your router is exhausted.Some low-cost router models are bad at handling a lot of concurrent connections, causing a new gadget like Smart to be a new gadget. TV, Maybe it just doesn't get IP-address.
Connecting via Wi-Fi: step-by-step instructions
The most common way to get online is by using a built-in wireless module. Android TV allows you to quickly find and connect to the networks available. First, take a remote control and press the button with the image of the gear or find the settings section in the main menu.
In the menu that opens, select Settings, then go to Network and Internet, where you activate the Wi-Fi switch if it's turned off, the TV will start scanning the surrounding space and in a few seconds display a list of available wireless networks.
☑️ Checklist of Wi-Fi connection
Find your network name (SSID) in the list and click on it. If the network is hidden, select Add Network and enter the name manually. After selecting, the password screen will appear. Use the on-screen keyboard, be attentive to the register of letters to them.
After entering the password, press Connect. The system will try to get IP-address automatically through the protocol DHCP. If the password is correct and the signal is stable, the Connected status will appear next to the network name, and a signal level icon will appear in the status bar.
💡
Use the WPS function, if you have it on your router, to connect without entering your password. Select "Connect via WPS" from the TV menu and press the WPS button on the router.
Configuring a wired LAN connection
A wired connection is considered the most stable option for watching video in high resolution 4K and HDR. It provides minimal latency (ping) and protection from interference, which are characteristic of wireless networks in apartment buildings.
To connect, you will need a standard Ethernet network cable (twisted pair). One end of the cable connects to the free LAN port on the router, and the second to the corresponding connector on the back or side panel of the Xiaomi TV.
| Parameter | Description | Recommendation |
|---|---|---|
| Type of cable | Cat 5e or Cat 6 | Use a cable not lower than Cat 5e for speeds up to 1 Gbps |
| Length | Up to 100 meters. | For home use, it is optimal to 10-15 meters |
| Speed. | 10/100/1000 Mbps | Depends on the TV model and router |
| Stability | Tall. | Perfect for streaming and online gaming |
In most cases, Xiaomi TV automatically determines the wired connection and prioritizes it over Wi-Fi. If that doesn't happen, go to Settings → Network and Internet, and select Wired Network. Here you can configure static. IP-address if your provider requires a rigid binding of addresses.
The use of cable is especially relevant for models with dual-band modules, which may not support maximum Wi-Fi speeds in noisy ether.The wired connection ensures that video bitrate does not fall during peak hours on the network.
Connection Problems and DNS Errors
Even with the right settings, you can have situations where the TV can see the network, but the Internet doesn't work. DNS conflict IP-If you see a message saying "No Internet access," try restarting your router and TV.
One of the most effective methods is the change DNS-servers to public from Google or Cloudflare. To do this, select your connected network in the network menu, go to Settings IP and change the regime with DHCP static.
DNS 1: 8.8.8.8
DNS 2: 8.8.4.4Enter these addresses in the appropriate fields. You can also use Cloudflare DNS: 1.1.1.1. Once you save the settings, be sure to turn off the TV completely (not in sleep mode, but by disconnecting from the network) and turn it back on for changes.
⚠️ Note: When switching to static IP-Address: Make sure you don’t include an address that is already occupied by another device on your local network to avoid conflict.
If the problem persists, check the date and time on your TV. Incorrect system clocks can block a secure HTTPS connection, causing applications to claim that the network is not there. Set Autodate and time to On.
Using the mobile Internet through a smartphone
In situations where the home provider is unavailable or has crashed, you can use your smartphone as an access point. Modern Xiaomi TV easily connects to the Wi-Fi (hotspot) created by Android or iOS phones.
Activate modem modem on your smartphone. Make sure your data plan allows you to transfer large amounts of data without significantly reducing speed or additional payments.
Restrictions of mobile Internet on TV
To connect, do the same thing you would do when you’re using your home router: find your phone’s network name in the Wi-Fi list on your TV and enter your password. Note that some carriers may block or restrict Internet access, so the speed may be lower than expected.
This method is also useful for initial setup of the TV, if the cable is laid in an uncomfortable place, and the Wi-Fi signal does not reach the new installation point, after initial setup and update of the software, you can return the standard network settings.
Checking connection speed and quality
Once successfully connected, it is recommended to check the real internet speed that the TV receives. There may not be built-in tools for a detailed speed test in PatchWall or Android TV, so you should use third-party apps.
Go to the Google Play Store on your TV and install a speed test app like Speedtest by Ookla or something like that. Run the test and compare the results to your data plan.
💡
For a comfortable viewing 4K-The speed of the connection should be at least 25 Mbps For Full HD (1080p) enough 5-10 Mbit/s.
Not only do you look at download speeds, but you also look at ping. High ping can cause delays in interface management or cloud gaming. If the speed is significantly lower than the ISP's stated speed, try moving the router closer to the TV or switching to the cable.
Regular speed checks help to identify problems with the provider’s equipment or the obsolescence of a router that does not cope with modern data transmission standards.