How to connect the Kion console to the TV via the Xiaomi phone: all working ways

Connecting the Kion console to a TV using a Xiaomi smartphone is a task that may seem difficult only at first glance.In fact, modern wireless data technologies (for example, Miracast or other technologies). DLNA) They allow you to do this in a matter of clicks, even if you don't have a remote or a cable on hand. In this article, we'll look at all the ways you can do this, from the classic way you connect through a phone. HDMI Up to advanced screen duplication techniques through Mi Share or third-party apps.

Features of the combination of Kion + Xiaomi says that both devices support proprietary Miracast protocols (for wireless display) and DLNA (However, not all TV and smartphone models work equally well with these technologies. 4/5 They may not support Miracast at the firmware level, and the Kion Smart Box sometimes requires manual network setup, and we've taken all the nuances into account and put together instructions that will work even in non-standard situations.

If you want to not just plug in the console, but also control it from your smartphone, we have a separate section with setting up the remote control over Bluetooth and applications like Mi Remote, and for those who have experienced connection errors, we have prepared a table with the codes of malfunctions and how to fix them.

1. Device Preparation: What to Check Before Connecting

Before you start setting up, make sure that all devices meet the minimum requirements, which will save time and eliminate common errors such as "device not found" or "no signal".

For the Kion console, check:

• 🔌 Power: The console must be connected to the outlet (not through the USB-The indicator on the body should be green or blue.
• 📡 Wi-Fi/Bluetooth: If you plan to connect wirelessly, activate these modules in the Kion settings (Settings) → Network → Wireless networks).
• 🔄 Firmware version: Outdated software may not support Miracast. Update the console via Settings → System system → Update of the PO.

For the Xiaomi smartphone:

• 📱 Version. MIUI: The wireless screen transmission function appeared in MIUI 10 and newer. Check the settings. → The phone.
• 🔗 Permissions: Give Mi Share and Screen Mirror applications access to location, storage, and network.
• 🔋 Battery charge: when wirelessly duplicated screen, the phone discharges 2-3 times faster. The recommended charge level is at least 50%.

If you are connecting through HDMI, check:

• 🔌 Port port HDMI On TV: It should be supported HDMI-CEC (for control from the remote control) and the resolution is not lower 1080p.
• 🔄 Cable: Use a Certified Cable HDMI 2.0 (for) 4K) or HDMI 1.4 (for Full) HD). Cheap Chinese cables may not transmit sound.

⚠️ Note: If your TV is released before 2015, it may not support Miracast or DLNA And then you have to do this at the hardware level. HDMI Or buy a Google Chromecast adapter.

2. Method 1: Connecting through HDMI-cable (the most reliable method)

This is a classic way that works on 100 percent of devices, regardless of the TV or smartphone model, and the only drawback is that you need to physically connect the cable, but you get a stable image without delay and maximum sound quality.

Step-by-step:

1. Connect one end. HDMI-cable to the Kion prefix, the other to the port HDMI Remember the port number (for example, on the TV, HDMI 1).
2. Turn the console on the socket. Wait for the main screen to load (usually takes 30 to 60 seconds).
3. On the TV remote, press the Source (or Input) button and select the port to which the cable is connected (for example, HDMI 1).
4. If the image does not appear, check it out: 🔌 Correct cable connection (try another port). 🔄 Settings for permission on the console: go to Settings → Display. → Screen resolution and select 1080p 60 Hz.

Now you can control the Kion console from a Xiaomi smartphone.

1. Download the Mi Remote app from Google Play (official from Xiaomi).
2. Open the application, click Add the device → Prefix. → Kion.
3. Follow the on-screen instructions for Bluetooth or Wi-Fi Direct sync.

⚠️ Note: On some Kion Smart Box models, when you first connect via the HDMI If you don't have a remote, use Mi Remote or connect the keyboard. USB.

Method 2: Wireless connection via Miracast (screen duplication)

Miracast is a wireless screen technology that works without the Internet (via Wi-Fi Direct protocol), and is built into most modern Kion consoles and Xiaomi smartphones (starting with the introduction of the new model). MIUI The main advantage is the absence of wires, and the disadvantage is the possible delays in the image (lag up to 1-2 seconds).

Instructions for Xiaomi:

1. Open the Settings. → Connections and sharing → Screen mirror (or Wireless display in older versions) MIUI).
2. Activate the Wireless Display slider and wait for the device to be searched.
3. On Kion, go to Settings. → Network → Miracast and turn on standby mode.
4. On your phone, select the name of your console from the list (for example, Kion-SmartBox-XXXX).
5. Confirm the connection on both devices (entry may be required) PIN-code).

If the connection fails:

• 🔄 Reboot both devices.
• 📡 Check that the console and phone are on Wi-Fi (even if you do not need the Internet).
• 🔧 Update your firmware on Kion and Xiaomi to the latest version.

Features of working through Miracast:

💡

If the image through Miracast is slowing down, lower the screen resolution on the phone to 720p This will reduce the load on the processor and reduce delays.

4. Method 3: Connecting through DLNA (streaming)

DLNA — It's a protocol for transmitting media files (video, music, photos) over a local network, and unlike Miracast, it doesn't duplicate a screen, it just broadcasts content, and it's convenient for watching movies or listening to music without cables.

How to set up DLNA between Xiaomi and Kion:

1. Connect both devices to the same Wi-Fi network (important!).
2. On the Kion console, turn it on. DLNA-Server: Go to Settings → Network → DLNA. Activate the slider Include DLNA. Remember the name of the server (for example, Kion-Media-Server).

Xiaomi

• Open the Gallery or Music app.
• Select a file, click Share. → Transmit it to the device.
• In the list, find your console name (Kion-Media-Server).

For convenience, you can use third-party applications:

• 🎬 BubbleUPnP – for streaming videos with support for subtitles.
• 🎵 AllConnect is a universal player for DLNA.
• 📁 File Commander – transfer of any files.

If the DLNA is not working:

• 🔌 Check that both devices are on the same network (not via mobile internet!).
• 🔄 Reboot the router.
• 🔧 On the console in the settings DLNA Enable the option to Allow access to all devices.

⚠️ Note: When transmitting video through DLNA Kion may not support some formats (e.g, MKV codeced H.265). In this case, use transcoding player applications, for example VLC.

5. Method 4: Control Kion console from Xiaomi smartphone

If you plug it into your TV, but you don't have a remote, you can use a Xiaomi smartphone as a universal remote, and there are two ways to do that: via Bluetooth or Wi-Fi.

Method 1: Mi Remote Appendix (official decision)

1. Download Mi Remote from Google Play.
2. Open the app and click Add the device.
3. Select the category Prefix → Kion.
4. Follow the on-screen instructions for synchronization (it may be necessary to enter code from the TV screen).

Method 2: Universal remotes (if Mi Remote does not work)

• 📱 Unified Remote – Bluetooth and Wi-Fi support.
• 🎮 Roku Remote – works with most Android consoles TV.
• 🔘 Sure Universal Remote has a codebase for Kion.

For voice control:

• 🎤 Set up Google Assistant on your phone and connect it to the console via Settings → Voice search.
• 🗣 Use commands like, "OK Google, turn on Netflix on Kion" "OK Google, set the volume to 50%"

💡

If the Kion console does not respond to commands from the phone, check that the Bluetooth settings have enabled the “Visible for all devices” mode.

6 Problem Solving: Connection Errors and Fixing Them

Even when you set it up properly, you can get errors, and we've collected the most common problems and ways to solve them.

If none of the methods helped, try resetting the Kion consoles to the factory:

1. Go to Settings → System → Resetting settings.
2. Select Reset all data and confirm.
3. After restarting, reset the connection.

To diagnose the network on the Kion console, you can use the command:

adb shell ping 8.8.8.8

If the ping doesn’t go away, the problem is connecting to the internet.

7.Alternative ways: Chromecast, AirPlay and third-party apps

If standard methods don't work, alternative solutions can be used, requiring additional devices or programs, but often saving in difficult situations.

Method 1: Google Chromecast

• 📺 Connect Chromecast to HDMI-television-port.
• 📱 On Xiaomi phone, install Google Home.
• 🔗 In the app add Chromecast and stream the screen through Screen Translation.

Method 2: ApowerMirror

• 📱 Install ApowerMirror on your phone and console.
• 🔗 Connect both devices to the same Wi-Fi network.
• 🖥 On your phone, select Mirror to TV and follow the instructions.

Method 3: AirPlay for Apple owners TV)

• 🍎 If you have an Apple TV, Put him on the TV.
• 📱 On Xiaomi, install AirScreen (AirPlay emulator for Android).
• 🔗 Start broadcasting the screen through AirPlay.

Comparison of alternative methods:

FAQ: Frequent questions about connecting Kion to a TV via Xiaomi