How to get it. SIM-Map from Xiaomi Redmi: The Complete Guide

Changing a carrier or replacing a damaged chip often poses a simple but neat question: how to get a sim card out of a shaomi redmi. Despite the seemingly elementary operation, inept actions can damage the tray or even the slot itself, which will entail costly repairs. Owners of Xiaomi and Redmi smartphones face this task regularly, and it is important to know the exact algorithm of actions for each model.

Modern Chinese-branded devices come with combination slots or individual sockets, with their designs nuanced. Misuse of tools or excessive force are the main enemies when removing the module. In this article, we will discuss the process in detail, discuss possible problems and give tips to help keep your device intact.

Slot type definition and tool preparation

The first step before you start any manipulation of the hardware of a smartphone is to understand the design of your particular device. Xiaomi models of recent years, such as the Redmi Note or Poco series, most often use a combined slot format Nano-SIM. This means that on one side of the tray is the operator card, and on the reverse or adjacent cell is a microSD card.

There are exceptions, however: Some budget models or older versions may have separate, non-combined sockets. It is important to visually inspect the end of the case so as not to confuse the SIM card slot with a microphone or reset hole (although the latter is rare in smartphones).

💡

If the original key is lost, use a straightened paper clip, but make sure that the end is not too sharp to damage the latch mechanism.

Under no circumstances try to use needles for sewing or toothpicking. Needles can break inside the hole and the toothpick tree will swell from moisture and jam the mechanism.The ideal tool should be metal, durable and have a diameter corresponding to the hole on the tray.

Step-by-step instructions for removing the tray

The process of retrieving the operator card is standardized for most Redmi devices, but requires care. First, you need to completely turn off the smartphone. Although many modern phones support hot replacement, power outage eliminates the risk of software failure or short circuit contacts.

Find an oblong hole at the end of the body (usually on the left or bottom), insert the key perpendicular to the surface and press with moderate force. You should feel a slight click, after which the tray will extend outwards a few millimeters, and now it can be carefully removed with your fingers.

Notice the position of the chip. There's always a cutout in the corner on the tray that matches the shape of the card. If you insert the card incorrectly, it just won't fall into the slots, and it's strictly forbidden to close the tray with force. Once you replace the card, insert the tray back until the characteristic snap of the fix.

What to do if the tray is stuck or not taken out

It's not common for the tray to refuse to go out even when using the key, but it causes panic. Most often it's a mechanical jamming or deformation of the tray itself. If you feel that the mechanism is stuck, don't use excessive force to push the key deeper, it can break the plastic pusher inside the case.

⚠️ Attention: If the tray is not removed after a strong press, try to slightly press the finger in the direction inwards, and then sharply release, while trying to tamper with the edge of the nail.

Another cause may be a swollen battery (in older models with removable battery) or deformation of the body after a fall, which sways the internal mechanisms. In such cases, self-intervention is better to stop and contact a service center, where they use a professional tool for opening without damage.

Specifics of working with hybrid slots

Owners of dual-SIM and memory card models often face the dilemma of choice: The Dual SIM + microSD hybrid slot physically prevents two SIM and flash cards from being installed simultaneously if they occupy the same plane. The tray design involves either two Nano-SIMs, or one Nano-SIM and one microSD.

When removing such a tray, it is important to be extremely careful with the small contacts, which are located on both sides of the plastic base. If you use only one SIM card, make sure that the empty socket is not clogged with dust that can oxidize the contacts when moisture enters.

There is a common myth that you can use adapters or modify maps to squeeze them into non-standard sizes. SIM-cards in smartphones Xiaomi Redmi often leads to a tray stuck inside the case, as the thickness of the structure exceeds the permissible norm.

Table of compatibility and characteristics of slots

For the convenience of users, we have prepared a summary table that will help determine the type of slot in popular models, this is especially true when buying a used device or planning to switch to another operator while saving the old memory card.

As you can see from the table, flagship series often lack a memory card slot for the sake of maintaining a thin case and installing a more capacious battery, in which case memory expansion is possible only through cloud services or OTG-drives.

Programmatic aspects and map definition

After you physically change the card and turn on the phone, the system must automatically identify a new operator «SIM-No card found" or "No network, the problem may be not only the contact, but also the software failure.

In the settings MIUI beyond the Settings path → SIM-You can control the priority of the cards for calls and the Internet, make sure that the slot is activated, sometimes after extraction and re-installation, you need to re-enter. PIN-code, if it has been previously installed.

💡

If the phone doesn’t see the SIM card after being replaced, wipe the card contacts with a soft eraser – oxidation is often the cause of signal loss.

It is also worth checking whether the card itself is blocked by the operator, and if it is frequently extracted and pasted, the operator’s security system may consider this as suspicious activity and temporarily block access to the network, requiring unlocking through his personal account or a call for support.

Frequent errors in replacement SIM-map

Many users make common mistakes that shorten the life of the connector. The most common of them is trying to push the tray by force if it doesn't come in the first time. The entry mechanism has guides, and if the tray is tight, it's skewed. Take it out and try to insert it again at the right angle.

Another mistake is to use glue to fix the tray if it's loose, and the glue can leak into the case and permanently damage the contacts or the ekranoplanes. If the tray falls out on its own, it's better to gently bend the tongue on the tray itself (if possible), or stick a micro-piece of scotch on the end, but not pour the liquid.

⚠️ Warning: Never leave the slot open without a card or stub for long periods of time.Dust and moisture are the main enemies of the motherboard, they can cause contact corrosion in a matter of weeks.

Compliance with these simple rules will allow you to easily change carriers and memory cards, keeping your Xiaomi in excellent technical condition.